CABLE NO. 53 ADSH4853013 FOR PNK-4S

CABLE NO. 53 ADSH4853013 FOR PNK-4S

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

DS CAT NO.1005-006633

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

AS PER REQUIREMENT & SPECIFICTAION

AS PER REQUIREMENT & SPECIFICTAION

EYELETING OPERATION IN RESPECT OF GROUND SHEET TPO OG

AS PER REQUIREMENT AND SPECIFICATION

WEB COTTON BLACK THICK 25 MM

IS:6488-1987( REAFFIRMED 1997( 2ND REV )

LIPODERM LIQUOR SAF(BASF)VERNOL LIQUOR ASN(ST/- CHARACTERISTIC : HIGH MOLECULAR PARAFFIN BASED

AS PER SPECIFICATION

COTTON SEWING THREAD 165 D TEX / 6 O.G.

AS PER REQUIREMENT AND SPECIFICATION

BUCKLE BRASSOLLER DOUBLE 25MM BRONGE

AS PER REQUIREMENT & SPECIFICATION

Sewing Thread Spun Polyester 145-D Tex/4 Variety No. 7T No. 50 Natural White

IS:9543-1980 and as in tender enquiry.

BOX FIBER BOARD RIGID CORRUGATED TRIPPLEWALL 7 PLY OF INTERNAL DIAMENTIONS 700 MM X 600 MM X 500MM

AS PER REQUIREMENT & SPECIFICATION

TAPE NEWAR POLYSTER O.G. OFF SIZES (FOR END CURTAIN FOR TEFS 4M / 2M UNIT) ONE SET CONSISTING OF:

AS PER REQUIREMENT AND SPECIFICATION

TAPE NEWAR POLYSTER O.G. OFF SIZES (FOR END CURTAIN FOR TEFS 4M / 2M UNIT) ONE SET CONSISTING OF:

AS PER REQUIREMENT AND SPECIFICATION

EYELET ALU. ALLOY (CHEMICALY PASSIVATED) NO.24 WITH TURNOVER WASHER

IS:4084-1978 (1st Revision) (Amendment No. 2), Reaffirmed 1991 and Supp. Schedule No. CIGS/SS/260 (B)

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

LATEX FOAM RUBBER SHEET SOLID TYPE 13MM THICK X .60M X 1.20M

IS:1741 1960 GRADE 'D' WITH AMDT. NO. 1 & 2

NYLON SEWING THREAD BLACK, VARIETY NO. H 1

IS: 4229-2003

CORD ELASTIC RING FOR TENT EXTENDABLE FLY INNER 4 M/2M UNIT.

JSS:8340:38:2002 AND ATTACHED DRG. & SPECN.IND/TC/AIR/

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IS:5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

IS:5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

TACK LASTING MACHINE 10 MM R.P. (IMPORTED )

AS PER SPEC

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

DS-CATNO.4930-000799

• Machining and Fabrication work

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

AS PER DRG.

AS PER DRG.

DS CAT No. Y3/6230-000012

• Optical

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

DYE SOLUTION BLACK FOR SUITABLE OF BOOT HIGH ANKLE LEATHER AND FABRIC BOTH (NO STAIN OF FABRICS AND LEATHER)

SPECIFICATION, TERMS & CONDITIONS AS PER BP SECTION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

LIPODERM LIQUOR SAF(BASF)VERNOL LIQUOR ASN(ST/- CHARACTERISTIC : HIGH MOLECULAR PARAFFIN BASED

AS PER SPECIFICATION

BALMOL BL-SFO (BARMER LAWRIE )/ DERMINOL NC LIQUID (STAHL)/LIPODERM LIQUOR EX (BASF)/CHROMOPOL SG (TFL)

AS PER SPEC

STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)

OEF DRAWING NO. SK-938

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

FIBER PIECES FOR CARRIER MENPACK

FIBRE SHEET VULCANISED RED 0.8 MM THICK

DRG.NO. IND/GS/1597 (b)

DRG.NO. IND/GS/1597 (b)

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

DS CAT NO.1005-000720 (3 SHEETS)

• Optical Manufacturing technology

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing

ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM.

ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM.

• Melting and Rolling

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

DS CAT NO.5315-001554

• As per drawing

• As per drawing

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

TAPE NYLON O.G. 25 MM (SPL)

PROV.SPCN.NO.DMSRDE/TKGS/84/318

BALMOL GL/CORIPOL BZN/ BAYKANOL LICKEWR FGW/IND

AS PER SPEC

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

NETTING MOSQUITO ROUND MESH HDPE O.G. 122 CMS.

IS:10054(LATEST).

PLASTIC SLIDE FASTENER CLOSED END HEAVY DUTY REVERSIBLE SLIDER O.G. SHADE 1140MMLONG

IS:14181 (LATEST)

PHOSPHATING CHEMICALS ONE SET CONSISTING OF :

4. THE CHEMICAL SHOULD CONFORM TO THE CLASS II OF THE SPECI-

Steel Mild Rod 10 mm Dia Straight in Multiple length of 1825 mm

IS:2062 (latest) grade A

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED

IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED

BUCKLE BRASS 25MM W.E.

SPECN. NO. IND/GS/1541 (5627/PK)

GAS DISS ACETYLENE

AS PER REQUIREMENT AND SPECIFICATION

FLAP NEAR (SADDLE SU PATT.02) DRG.NO. IND/GS/1597(b)

IND/GS/572 (c).

S.M.ANGLE 25X25X3MM IN LENGTH OF 4.75 MTRS

SPECN.NO. IS:2062(LATEST) GRADE'A' E-250 (Fe 410W)

ROPE POLYPROPLENE 3 STRAND H/L O.G. 6 MM DIA

IND/TC/2324 (b) EXCEPT THAT

IS:1912 -1984 V.NO.2

IS:1912 -1984 V.NO.2

COTTON KNITTED FABRIC 2/2 RIB KNIT WHITE BLEACHED 46 +_ 1 CMS. WIDE - UNPRROFED

IND/NAVY/TC/4287(b) EXCEPT FLAME PROOFING AND WEIGHT WHICH

IND/GS/1269(C)

IND/GS/1269(C)

ROPE POLYPROPLINE H/L 3 STRAND O.G. 8MM DIA

SPECN IND/TC/2324(b) EXCEPT THAT

BOX FIBRE BOARD RIGID CORRUGATED SIZE - 1560 MM X 810 MM X 160 MM

CQA(GS)/US/460 (EXCEPT FOR SIZES)

FABRIC NYLON 66 BREATHABLE POLY URETHENE COATED DISRUPTIVE ARMY COMOFLAGE PATTER N 180 +2 CM (NO NEGATIVE TOLERANCE) WIDE

CQA(T&C)PROV.SPECN.NO.PROV/S/3566/RAIN CAPE MP DIS/TC-15(d)

FABRIC NYLON 66 AIRTEXTURED PU COATED INDIAN ARMY PRINT 135/136 CMS

SPECN. NO. IND / TC / 0155 AND AS PER ANNEXURE 'A' ATTACHED

IND/TC/2314 (a)

IND/TC/2314 (a)

as per requirement

as per requirement

as per requirement

CLOTH POLYPROPYLENE OG TPO COATING 115 CMS WIDE.

SPECIFICATION NO: JSS 8305 - 35 : 2014 {7218/PK} EXCEPT THAT

As per rquirement & specification

As per rquirement & specification

PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B)

PROV.SPECIFICATION NO.DMSRDE/T&GS/96/431(B)

NYLON FABRIC O.G. POLYURETHANE COATED (250 GM/SQR M)91 CM

SPECN. NO. IND/TC/2314 (a)

CLOTH DRILL COTTON WHITE BLEACHED 71 CMS(V.NO.3)

IS : 177-1989 V.NO.3.

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

FABRIC NYLON BLACK 250 GMS P U COATED 172 CMS WIDE.

Specification No. IND/TC/0155 Except Threads/Cm (As per

FABRIC NYLON 300 GSM RIP STOP PU COATED FR 152 CMS WIDE

AS PER SPEC

• as per existing norms
• as per existing norms
• as per existing norms
• as per existing norms
• as per existing norms

• as per existing norms
• as per existing norms
• as per existing norms
• as per existing norms
• as per existing norms

PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS

AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PP PLASTIC TAPE FOR SEMI AUTOMATIC STRAPPING EQUIPMENT ( MAGENATIC TYPE) SIZE 12MM WIDTH X 0.5 MM THICK APPROX. SPORN (PAPER CONE) SIZE O/D 227 MM X I/D 203MM

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)

OEF DRAWING NO. SK-938

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

ROTARY TRANSFORMER 2.5 VT LSH 3.010.399 TY

ROTARY TRANSFORMER 2.5 VT LSH 3.010.399 TY

TRANSFORMER TPP 217-40-400 AS PER SPECN. NO. OUO .471.00 TU

TRANSFORMER TPP 217-40-400 AS PER SPECN. NO. OUO .471.00 TU

TRANSFORMER TPP 6-40-400 AS SPECN. NO. OUO .471.000 TU

TRANSFORMER TPP 6-40-400 AS SPECN. NO. OUO .471.000 TU

TRANSFORMER TOT 7 AS PER SPECN. NO. OUUO.472.010TU

TRANSFORMER TOT 7 AS PER SPECN. NO. OUUO.472.010TU

ALUMINIUM PIPE DIA OD 45 X 1.5 X 4000MM LENGTH AS PER AMG5M GOST: 18475-73 IN ANNEALED CONDITION AND MATERIAL SHOULD BE SUPPLIED IN 4000MM LENGTH ONLY.

ALUMINIUM PIPE DIA OD 45 X 1.5 X 4000MM LENGTH AS PER AMG5M GOST: 18475-73 IN ANNEALED CONDITION AND MATERIAL SHOULD BE SUPPLIED IN 4000MM LENGTH ONLY.