Brass Cup for 7.62 mm Case
To Spec: MIL-C-10375 C (AR) Dt. 03-04-1991
And as per Drg. No. V/PROD/0089
Material Specification For Brass Cup to Spec: JSS 9535-02-2019 (Revision No. 5)
Specification
Brass Cup for 7.62 mm Case
To Spec: MIL-C-10375 C (AR) Dt. 03-04-1991
And as per Drg. No. V/PROD/0089
Material Specification For Brass Cup to Spec: JSS 9535-02-2019 (Revision No. 5)
BRASS TUBES (SEAMLESS) OD 6MM PLUS MINUS 0.05, ID 5MM PLUS MINUS 0.05 MM OF TWO METER LENGTH TO SPECIFICATION JSS: - 9535-02:2019 REV. 5 AND PHYSICAL PROPERTIES TO SPECN. IS 407-1981, (THIRD REV) REAFFIRMED 2021 HARDNESS 110-130 VPN.
Specification
JSS: - 9535-02:2019, REV. 5 AND PHYSICAL PROPERTIES TO SPECN. IS 407-1981
Brass Strip 16 mm For 7.62 mm Primer Cup
Size: 16 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick
To Specification:- JSS: 9535-02-2019 (Revision No. 5)
To Drawing No. :- V/PROD/0039-H
Grain Size:- 0.040 mm to 0.070 mm
Specification
Brass Strip 16 mm For 7.62 mm Primer Cup
Size: 16 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick
To Specification:- JSS: 9535-02-2019 (Revision No. 5)
To Drawing No. :- V/PROD/0039-H
Grain Size:- 0.040 mm to 0.070 mm
Brass Strip 12 mm For 7.62 mm Anvil
Size: 12 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick
To Specification:- JSS: 9535-02-2019 (Revision No. 5)
To Drawing No. :- V/PROD/0038H
Specification
Brass Strip 12 mm For 7.62 mm Anvil
Size: 12 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick
To Specification:- JSS: 9535-02-2019 (Revision No. 5)
To Drawing No. :- V/PROD/0038H
30MM BMP-II CARTRIDGE CASE EMPTY MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/CC/484.
Specification
30MM BMP-II CARTRIDGE CASE EMPTY MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/CC/484.
Drawing no.
Manufacturing Technology
FORGING FACILITY, CNC LATHE MACHINE, ELECTROPLATING (CHROMATE PASSIVATION) FACILITY, , HARDNESS TESTING , HEAT TREATMENT FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM FOR THE SAME.
30MM BMP-II SHELL HE/I (EMPTY) WITH DRIVING BAND MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/HEI/485 (02 SHEETS i.e 1/2 & 2/2)
Specification
30MM BMP-II SHELL HE/I (EMPTY) WITH DRIVING BAND MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/HEI/485 (02 SHEETS i.e 1/2 & 2/2)
Drawing no.
Manufacturing Technology
FORGING FACILITY, CNC LATHE MACHINE, GRINDING FACILITY, KNURLING FACILITY, PHOSPHATING FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM DOING PHOSPHATING, HARDNESS TESTING FACILITY, HEAT TREATMENT FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM FOR THE SAME, BAND PRESSING FACILITY
SET OF 04 COMPONENTS (ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL) FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)
Specification
SET OF 04 COMPONENTS (ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL) FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)
AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)
Specification
AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)
Drawing no.
Manufacturing Technology
AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)"
AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)"
AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)
Specification
AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)
Drawing no.
Manufacturing Technology
AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)"
AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A
DT. 08/03/10. (WITHOUT FITMENT)"
WASHER(80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM.
Note:- WASHER (80/20 TIN ZINC ALLOY) O.D. 12.7 MM, I.D. 9.52 MM AND THICKNESS 0.508 MM. NOTE: TIN ZINC ALLOY STRIP SOFT 80/20 SHOULD BE SUBJECTED TO CLOSE BEND TEST. THE TEMPERATURE OF THE TEST PIECE DURING BEND TEST SHOULD NOT EXCEED -2 DEG. CENTIGRADE DRG. NO.OFDR/MF-6/R5
Specification
WASHER(80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM.
(1) Tensile Strength: 4500 KN/SQ. MTR. MIN
(2) Elongation: 100% Min.
(3) Thickness: 1.5 MM + 0.5 MM
(4) Physical Appearance: Black Colour
(5) Dimensions of one sheet, length: 1215 MM Â ± 5 & Width:375 to 380 MM
(6) Material shall consist of essentially of Neoprene Rubber in the form of a wax-free, both side matt (for proper bonding/adhesion) with no stretch marks.
Note: Dimensions strictly uniform
TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. NO. ISV 266 GA WHICH CONSIST OF CWP 14A, CARTON 11 A/L AND CARTON 12A
BIMETAL CUP AS PER OFV SPECIFICATION OFV/12.7 mm
BULLET ENVELOP/BIMETAL CUP Rev. No. 4 AS PER DRAWING
V12.7/PROD/057 E BIMETAL CUP IN ANNEALED AND
WASHED CONDITION
Specification
BIMETAL CUP AS PER OFV SPECIFICATION OFV/12.7 mm
BULLET ENVELOP/BIMETAL CUP Rev. No. 4 AS PER DRAWING
V12.7/PROD/057 E BIMETAL CUP IN ANNEALED AND
WASHED CONDITION
SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED)
Specification
SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED)
Drawing no.
SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10
Manufacturing Technology
SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10
SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10
SET OF 7 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CUP DET NO.2 (2) LID DET NO.3 (3) AL TUBE DET NO.4 (4) NUT-DET NO.5 (5) RUBBER GASKET 1 DET.NO.6 (6) RUBBER GASKET 2 DET NO.7 (7) RUBBER GASKET 3 DET NO.8
Specification
SET OF 7 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CUP DET NO.2 (2) LID DET NO.3 (3) AL TUBE DET NO.4 (4) NUT-DET NO.5 (5) RUBBER GASKET 1 DET.NO.6 (6) RUBBER GASKET 2 DET NO.7 (7) RUBBER GASKET 3 DET NO.8
CARTG CASE DIA 75+0.22 MM H-12 TO DRG. NO. F-1301-135341-B DC NO.37467-A DT. 27/12/2017 TO SPECN NO. F-1301-915710CCQA(A) -0307 (C) DC(I) -35810-A DT 19/9/94 (9911333509)
Specification
CARTG CASE DIA 75+0.22 MM H-12 TO DRG. NO. F-1301-135341-B DC NO.37467-A DT. 27/12/2017 TO SPECN NO. F-1301-915710CCQA(A) -0307 (C) DC(I) -35810-A DT 19/9/94 (9911333509)
EXPANDED CROSS LINKED POLYETHYLENE FOAM SHEET TO SPECIFICATION NO. IND/ME/1023 DT.27/04/13. AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4. EACH SET CONSIST OF SIZES 1) 585 x 220 x 35 – 2 NOS./SET 2) 585 x 230 x 42.5 MM – 2 NOS./SET 3) 230 x 135 x 20 MM – 7 NOS. 4) 245 x 125 x 1.5 MM – 26 NOS./SET
Specification
EXPANDED CROSS LINKED POLYETHYLENE FOAM SHEET TO SPECIFICATION NO. IND/ME/1023 DT.27/04/13. AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4. EACH SET CONSIST OF SIZES 1) 585 x 220 x 35 – 2 NOS./SET 2) 585 x 230 x 42.5 MM – 2 NOS./SET 3) 230 x 135 x 20 MM – 7 NOS. 4) 245 x 125 x 1.5 MM – 26 NOS./SET
Drawing no.
AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4.
COLLAPSIBLE STEEL PALLET WITH 12 NOS OF BOX M41A (STEEL) AS PER SPECIFICATION NO: OFBL/1/MINE 4D ND/PACKING/2024(REV-1), DATE: 14.12.2024 OR LATEST REVISION.
Specification
AS PER SPECIFICATION NO: OFBL/1/MINE 4D ND/PACKING/2024(REV-1), DATE: 14.12.2024 OR LATEST REVISION.
7TH SET OF 03 ITEMS FOR MMHG CONSIST OF FOLLOWING ITEMS 1. CAP DRG. NO TRBL/MMG-H/MK-1/037/R0, 2. FUZE BODY ASSY (EMPTY) DRG. NO. TRBL/MMG-H/MK-1/034/R1, 3. MAGAZINE HOLDER DRG. NO. TRBL/MMG-H/MK-1/040/R1
Specification
7TH SET OF 03 ITEMS FOR MMHG CONSIST OF FOLLOWING ITEMS 1. CAP DRG. NO TRBL/MMG-H/MK-1/037/R0, 2. FUZE BODY ASSY (EMPTY) DRG. NO. TRBL/MMG-H/MK-1/034/R1, 3. MAGAZINE HOLDER DRG. NO. TRBL/MMG-H/MK-1/040/R1
EXTRUDED AL.PROFILE FOR 125MM FSAPDS AMK-339 DRIVING RING AS PER DRAWING NO: O DRG 125 1 005 O, LATEST TECHNICAL SPECIFICATION & MONITORING INSTRUCTION FOR INSPECTION ENCLOSED.
(L.F. No.0126700099)
Specification
Technical Specification No. HEPF/QA/AMK/SPEC /002 Rev. No.00 Date of Issue 11-09-2024
Monitoring Instruction for Inspection No. HEPF/QA/SC/AMK/010, Issue No.01, Rev. No.00 Date of Issue 06-12-2024
BOMB A/C PRACTICE SMOKE & FLASH 25 LBS NO.1 MK-1 AIR COMPLETE WITH TAIL UNIT EMPTY TO DRG NO ARM-1099 C1 R.NO.6DT 25/05/88 AMENDED VIDE AL NO. 605 TO SPECN: DTD & P (AIR) / ARM-57 (LF: 6040600100)
Specification
BOMB A/C PRACTICE SMOKE & FLASH 25 LBS NO.1 MK-1 AIR COMPLETE WITH TAIL UNIT EMPTY TO DRG NO ARM-1099 C1 R.NO.6DT 25/05/88 AMENDED VIDE AL NO. 605 TO SPECN: DTD & P (AIR) / ARM-57 (LF: 6040600100)
SET OF 04 COMPONENTS (ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL) FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)
Specification
SET OF 04 COMPONENTS (ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL) FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)
ELECTRONIC FUZE WITH SAM FOR STM EMPTY CONSISTING OF ELECTRONIC MODULE FOR STM FUZE ADM-III, ARDE QAP NO.ARDE / AE ELSUB / EM MK II STM / 2014 / 02 AND SAFETY ARMING MECHANISM EMPTY FOR STM FUZE ADM III ARDE DRG.NO.8603 04 08 02 01 000 00 DB
Specification
ARDE QAP NO.ARDE / AE ELSUB / EM MK II STM / 2014 / 02 AND SAFETY ARMING MECHANISM EMPTY FOR STM FUZE ADM III ARDE DRG.NO.8603 04 08 02 01 000 00 DB
Drawing no.
ARDE QAP NO.ARDE / AE ELSUB / EM MK II STM / 2014 / 02 AND SAFETY ARMING MECHANISM EMPTY FOR STM FUZE ADM III ARDE DRG.NO.8603 04 08 02 01 000 00 DB
INFLUENCE FUZE WITH SAM FOR ATM EMPTY CONSISTING OF ELECTRONIC MODULE OF FUZE FOR ADM II, ARDE DRG. NO. 8603 04 07 02 09000 00 PA QAP NO.ARDE / QAP / ADM II / FUZE / EM / 2023 AND SAFETY ARMING MECHANISM FOR ATM EMPTY ARDE DRG.NO.8603 04 07 02 01 00000 PA
Specification
ARDE DRG. NO. 8603 04 07 02 09000 00 PA QAP NO.ARDE / QAP / ADM II / FUZE / EM / 2023 AND SAFETY ARMING MECHANISM FOR ATM EMPTY ARDE DRG.NO.8603 04 07 02 01 00000 PA
Drawing no.
ARDE DRG. NO. 8603 04 07 02 09000 00 PA QAP NO.ARDE / QAP / ADM II / FUZE / EM / 2023 AND SAFETY ARMING MECHANISM FOR ATM EMPTY ARDE DRG.NO.8603 04 07 02 01 00000 PA
BRASS CUP DRG.KH-2003 FOR 40MM/L70 (LF-6071100210)
Specification
CUP(MODIFIDE) BRASS FULLY ANNEALED TO DRG. NO. Kh-2003 H TO SPECN:-JSS-9535-02:2019(REV. NO.5).(CONCESSION IN WALL THICKNESS VARIATION UP TO 0.25 MM ACCEPTED).
following test as per Drg./Spec/QAP C) Sodium Nitrite % by mass d) In case of Sole selling agents/Dealers/Stockiest category firm; the firm participating the tender need not submit manufacturing technology/Inspection technology details of their firm but firm should product valid OEM authorization letter for the tender item along with details of OEM firm.
following test as per Drg./Spec/QAP C) Sodium Nitrite % by mass d) In case of Sole selling agents/Dealers/Stockiest category firm; the firm participating the tender need not submit manufacturing technology/Inspection technology details of their firm but firm should product valid OEM authorization letter for the tender item along with details of OEM firm.
MANUFACTURING TECHNOLOGY
1. MIXING PLANT
2. IN CASE OF SOLE SELLING AGENTS/DEALERS/STOKIEST CATEGORY FIRM; THE FIRM PARTICIPATING THE TENDER NEED NOT SUBMIT MANUFACTURING TECHNOLOGY / INSPECTION TECHNOLOGY DETAILS OF THEIR FIRM BUT FIRM SHOULD PRODUCE VALID OEM AUTHORIZATION LETTER FOR THE TENDER ITEM ALONG WITH DETAILS OF OEM FIRM.
INSPECTION TECHNOLOGY
1. POT LIFE IN MINUTES
2. BOND STRENGTH
3. PH OF WATER EXTRACT
4. WATER SOLUBLE CHLORIDES AS NaCl
5. WATER SOLUBLE SULPHATES AS Na2SO4
6. COMPATIBILITY WITH EXPLOSIVES
