FORE SIGHT TO DS CAT NO.1005-007737 (LATEST DC-26002-SA DT.02-11-2004) FOR RIFLE 5.56MM INSAS.

FORE SIGHT TO DS CAT NO.1005-007737 (LATEST DC-26002-SA DT.02-11-2004) FOR RIFLE 5.56MM INSAS.

FLASH ABSORBER TO DS CAT 1005-007739 (LT DC-24638-SA 21-2-2000 (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD BETTER THAN 3 (THIN) & 1(THICK) FOR A,B,C,D & MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT LIMIT C2 R2 S2 FOR PLATE-1 & NIL FOR PLATE-II). TP TO BE TESTED TO CONFORM 250 TO 300 HV AFTER H & T.

FLASH ABSORBER TO DS CAT 1005-007739 (LT DC-24638-SA 21-2-2000 (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD BETTER THAN 3 (THIN) & 1(THICK) FOR A,B,C,D & MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT LIMIT C2 R2 S2 FOR PLATE-1 & NIL FOR PLATE-II). TP TO BE TESTED TO CONFORM 250 TO 300 HV AFTER H & T.

SCREW SLOTED CSK HEAD TYPE-A M5x20 TO IS:1365-1968 DS CAT NO.5305-057923 (NO DRAWING) FOR RIFLE 5.56MM INSAS.

SCREW SLOTED CSK HEAD TYPE-A M5x20 TO IS:1365-1968 DS CAT NO.5305-057923 (NO DRAWING) FOR RIFLE 5.56MM INSAS.

As per drawings

As per drawings

AS PER AHSP SPECN. & DRGS.

AS PER AHSP SPECN. & DRGS.

PRE-MACHINED BARREL BLANK TO RFI SK NO.6409/A.(TP TO BE TESTED TO CONFIRM MECH,PROP. AT T-1 COND.)MACRO ETCH TEST AS PER ASTME-381-84 OR IS :13015-1991 WITH ACCPT.STD.C2R2S2 FOR PLATE-1 & NIL FOR PLATE-II.NMIR TEST AS PER IS:4163-82 WITH ACCPT.STD BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D.

PRE-MACHINED BARREL BLANK TO RFI SK NO.6409/A.(TP TO BE TESTED TO CONFIRM MECH,PROP. AT T-1 COND.)MACRO ETCH TEST AS PER ASTME-381-84 OR IS :13015-1991 WITH ACCPT.STD.C2R2S2 FOR PLATE-1 & NIL FOR PLATE-II.NMIR TEST AS PER IS:4163-82 WITH ACCPT.STD BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D.

BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.

BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.

FINISHED COMPONENT OF BLOCK REAR TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT.13-01-2003) FOR RIFLE 5.56MM INSAS.

FINISHED COMPONENT OF BLOCK REAR TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT.13-01-2003) FOR RIFLE 5.56MM INSAS.

Drg No. SK-8345/C

Drg No. SK-8345/C

PRE-MACHINED BARREL BLANK TO RFI SK NO.6409/A.(TP TO BE TESTED TO CONFIRM MECH,PROP. AT T-1 COND.)MACRO ETCH TEST AS PER ASTME-381-84 OR IS :13015-1991 WITH ACCPT.STD.C2R2S2 FOR PLATE-1 & NIL FOR PLATE-II.NMIR TEST AS PER IS:4163-82 WITH ACCPT.STD BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D.

PRE-MACHINED BARREL BLANK TO RFI SK NO.6409/A.(TP TO BE TESTED TO CONFIRM MECH,PROP. AT T-1 COND.)MACRO ETCH TEST AS PER ASTME-381-84 OR IS :13015-1991 WITH ACCPT.STD.C2R2S2 FOR PLATE-1 & NIL FOR PLATE-II.NMIR TEST AS PER IS:4163-82 WITH ACCPT.STD BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D.

BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.

BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.

FINISHED COMPONENT OF BLOCK REAR TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT.13-01-2003) FOR RIFLE 5.56MM INSAS.

FINISHED COMPONENT OF BLOCK REAR TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT.13-01-2003) FOR RIFLE 5.56MM INSAS.

AS PER AHSP SPECN. & DRGS.

AS PER AHSP SPECN. & DRGS.

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

ITW 64

ITW 64

AS PER DRAWING

AS PER DRAWING

DRG NO-2186

DRG NO-2186

AS PER DRAWING

AS PER DRAWING

DRG.NO- P 181(a)

DRG.NO- P 181(a)

IQX 943

IQX 943

ITW 69

ITW 69

ITW 66

ITW 66

DRG NO- CO-42

DRG NO- CO-42

AS PER DRAWING

AS PER DRAWING

DRG.NO-ARM 1519

DRG.NO-ARM 1519

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

DRG.NO. 6417888/DRG.NO. TRD-1-2-2293

DRG.NO. 6417888/DRG.NO. TRD-1-2-2293

DRG.NO. 6413206/DRG. NO. TRD-1-2-2242

DRG.NO. 6413206/DRG. NO. TRD-1-2-2242

TRD-122149

TRD-122149

TRD-2-2-2271

TRD-2-2-2271

TRD-2-2-2273

TRD-2-2-2273

TRD-1-2-2246

TRD-1-2-2246

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

TRD-1-2-2265

TRD-1-2-2265

TRD-1-2-2267

TRD-1-2-2267

AS PER REQUIREMENT

AS PER REQUIREMENT

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

DRG.NO. F-1301-026041-C

DRG.NO. F-1301-026041-C

DRG.NO. TRD-141/J

DRG.NO. TRD-141/J

As per Customers Specification

As per Customers Specification

AS PER DRAWING

AS PER DRAWING

Drg .No. OFBA/CX/55 dtd16.08.94amended on 15.02.02

Drg .No. OFBA/CX/55 dtd16.08.94amended on 15.02.02

Drg.No.13979-0-0 DC 35707 A & SPEN- IA 1169(n)

Drg.No.13979-0-0 DC 35707 A & SPEN- IA 1169(n)

Drg. No. CQA (Ammn) 4085561 DC 37637 - A dtd. 17.12.93

Drg. No. CQA (Ammn) 4085561 DC 37637 - A dtd. 17.12.93

Drg .No. OFBA/CX/54 dtd 08.04.93

Drg .No. OFBA/CX/54 dtd 08.04.93

Drg No.13646-4-0 & CFA Drg. No. 13-S/003

Drg No.13646-4-0 & CFA Drg. No. 13-S/003

CHEST RIFLE 5.56 (WOODEN) CAPACITY - 10 RIFLES WITH ACCESSORIES AS PER DRG.NO. CQA(SA)SK-625 (SHT-1 AND SHT-2) (LATEST DC FOR SHT-1 IS 26168-SA DT.06-03-06 AND FOR SHT-2 IS 10-9-05) FOR RIFLE 5.56MM INSAS.

CHEST RIFLE 5.56 (WOODEN) CAPACITY - 10 RIFLES WITH ACCESSORIES AS PER DRG.NO. CQA(SA)SK-625 (SHT-1 AND SHT-2) (LATEST DC FOR SHT-1 IS 26168-SA DT.06-03-06 AND FOR SHT-2 IS 10-9-05) FOR RIFLE 5.56MM INSAS.

IND/ME/1011(PROV.)-2000 DC 3607ME DTD. 13.03.2000

IND/ME/1011(PROV.)-2000 DC 3607ME DTD. 13.03.2000

As per Component Drg.

As per Component Drg.

As per requirement

As per requirement

As per requirement

As per requirement

WHEEL LOCK TO DS CAT NO. 1005-560045 (LATEST DC-25636-SA DT.01-01-2003) FOR RIFLE 5.56MM INSAS.

WHEEL LOCK TO DS CAT NO. 1005-560045 (LATEST DC-25636-SA DT.01-01-2003) FOR RIFLE 5.56MM INSAS.

SPACER STEPPED TO DS CST NO.5365-010491 (LATEST DC-23918-SA DT.18-09-1997) FOR RIFLE 5.56MM INSAS.

SPACER STEPPED TO DS CST NO.5365-010491 (LATEST DC-23918-SA DT.18-09-1997) FOR RIFLE 5.56MM INSAS.

PIN GROOVED HEADED FOR HINGE COVER TO DS CAT NO 5315-009188 (LATEST DC-24744-SA DT.12-06-2000 FOR RIFLE 5.56MM INSAS.

PIN GROOVED HEADED FOR HINGE COVER TO DS CAT NO 5315-009188 (LATEST DC-24744-SA DT.12-06-2000 FOR RIFLE 5.56MM INSAS.

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315-009190 (LATEST DC-24006-SA DT.29-12-97) FOR RIFLE 5.56MM INSAS.

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315-009190 (LATEST DC-24006-SA DT.29-12-97) FOR RIFLE 5.56MM INSAS.

FINISH COMPT. OF PLUNGER MULTIAPPLICATION (HOD) DS CAT NO.1005-007788 (LATEST DC-24636-SA DT.17-2-2000) FOR RIFLE 5.56MM INSAS.

FINISH COMPT. OF PLUNGER MULTIAPPLICATION (HOD) DS CAT NO.1005-007788 (LATEST DC-24636-SA DT.17-2-2000) FOR RIFLE 5.56MM INSAS.

As per requirement

As per requirement

As per requirement

As per requirement

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.

PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.

LEVER TRIPPING TO DS CAT NO.5340-16094 (LT.DC25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD. C2Rs S2 FOR PLATE-1 AND NIL FOR PLATE-II)(NMIR TEST AS PER IS:4163-82 AND INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A.

LEVER TRIPPING TO DS CAT NO.5340-16094 (LT.DC25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD. C2Rs S2 FOR PLATE-1 AND NIL FOR PLATE-II)(NMIR TEST AS PER IS:4163-82 AND INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A.

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)

GUIDE SPRING MAIN ASSY TO DS CAT NO.5360-007390 (LT.DC-25139-SA DT.08-10-2001) CONSISTING OF 1) GUIDE SPRING MAIN-1005-003186 DC24858-SA) 2) PLUG GUIDE-1005-003187 (DC-24858-SA) 3)SPRING LEVER LOCKING 1005-003188 (DC-24868-SA) AND CHROMIUM ALLOY STEEL BALL 3.96MM DIA.FOR PISTOL AUTO 9MM 1A

GUIDE SPRING MAIN ASSY TO DS CAT NO.5360-007390 (LT.DC-25139-SA DT.08-10-2001) CONSISTING OF 1) GUIDE SPRING MAIN-1005-003186 DC24858-SA) 2) PLUG GUIDE-1005-003187 (DC-24858-SA) 3)SPRING LEVER LOCKING 1005-003188 (DC-24868-SA) AND CHROMIUM ALLOY STEEL BALL 3.96MM DIA.FOR PISTOL AUTO 9MM 1A

CATCH MAGAZINE TO DS CAT NO.1005-003148 (LT.DC-26043-SA DT.14-3-05) FOR PISTOL AUTO 9MM 1A

CATCH MAGAZINE TO DS CAT NO.1005-003148 (LT.DC-26043-SA DT.14-3-05) FOR PISTOL AUTO 9MM 1A

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18-09-1997) FOR RIFLE 5.56MM INSAS.

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18-09-1997) FOR RIFLE 5.56MM INSAS.

PLUNGER MULTI-APPLICATION (GAS REGULATOR) TO DS CAT NO.1005-007787 (LATEST DC-23938-SA DT.16-10-97) FOR RIFLE 5.56MM INSAS.

PLUNGER MULTI-APPLICATION (GAS REGULATOR) TO DS CAT NO.1005-007787 (LATEST DC-23938-SA DT.16-10-97) FOR RIFLE 5.56MM INSAS.

PIN STRAIGHT HEADLESS COLLAR BARREL TO DS CAT -5315-046806 (LATEST DC 25655-SA DT.11-1-03) FOR RIFLE 5.56MM INSAS.

PIN STRAIGHT HEADLESS COLLAR BARREL TO DS CAT -5315-046806 (LATEST DC 25655-SA DT.11-1-03) FOR RIFLE 5.56MM INSAS.

PIN COCKING HANDLE STUD TO DS CAT NO.5315-001764 (LATEST DC-23471-SA DT.2-9-96) FOR RIFLE 5.56MM INSAS.

PIN COCKING HANDLE STUD TO DS CAT NO.5315-001764 (LATEST DC-23471-SA DT.2-9-96) FOR RIFLE 5.56MM INSAS.

LOCK RETAINER TO DS CAT NO 5340-015159 (LATEST DC-23952-SA DT.06-11-1997).FOR RIFLE 5.56MM INSAS.

LOCK RETAINER TO DS CAT NO 5340-015159 (LATEST DC-23952-SA DT.06-11-1997).FOR RIFLE 5.56MM INSAS.

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.

PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)