ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
BRASS STRIP 127+/-0.5 MM WIDE X0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN: IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1 APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification
BRASS STRIP 127+/-0.5 MM WIDE X0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN: IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1 APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
Specification
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
BRASS STRIP 127+/-0.5 MM WIDE X0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN: IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1 APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification
BRASS STRIP 127+/-0.5 MM WIDE X0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN: IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1 APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
48643
ADV_508_127
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1. BODY TO DRG.NO.TRD - 1282 (b) 2 .LID TO DRG.NO.TRD - 1283 (b) 3. RING TO DRG.NO.TRD - 1284 (a) B.SLEEVE TO DRG.NO.TRD - 1285 (b) C.PIECE PACKING BOTTOM TO DRG.NO.TRD - 1286D.PIECE PACKING CENTRE TO DRG.NO.TRD - 1287E.PIECE PACKING TOP TO DRG.NO.TRD - 1288F.LABEL TO DRG.NO.OFK - 2003 B 16
Specification
CONTAINER POLYTHENE NO.P-17-A SHEET 3 (METHOD OF PKG)DRG. NOTRD-1293.A.CONTAINER P-17A EMPTY ASSY.OF DRG.NO.TRD - 1281 (a) 1. BODY TO DRG.NO.TRD - 1282 (b) 2 .LID TO DRG.NO.TRD - 1283 (b) 3. RING TO DRG.NO.TRD - 1284 (a) B.SLEEVE TO DRG.NO.TRD - 1285 (b) C.PIECE PACKING BOTTOM TO DRG.NO.TRD - 1286D.PIECE PACKING CENTRE TO DRG.NO.TRD - 1287E.PIECE PACKING TOP TO DRG.NO.TRD - 1288F.LABEL TO DRG.NO.OFK - 2003 B 16
CAP TO DRG. NO. F1301-024351-J DC NO 36522-A DT. 10/02/99 & LOCK BOTTOM TO DRG. NO. F1301-029651-F DC NO. 36771-A DT.31/07/01 SPECN:- F1301-905060-P DT 7/1/91
Specification
CAP TO DRG. NO. F1301-024351-J DC NO 36522-A DT. 10/02/99 & LOCK BOTTOM TO DRG. NO. F1301-029651-F DC NO. 36771-A DT.31/07/01 SPECN:- F1301-905060-P DT 7/1/91
