MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

61921

ADV_568_105

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
TRIGGERING PIN CATCH FOR 12 BORE MODIFIED PUMP ACTION GUN. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
TRIGGERING CATCH PLUNGER FOR 12 BORE MODIFIED PUMP ACTION GUN. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
TAKE DOWN SCREW FOR 12 BORE MODIFIED PUMP ACTION GUN. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility

61922

ADV_903_131

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
Drive Shaft Gear Axle Side-257428307901 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Gear Imput Low - X-1601411 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility

61923

ADV_584_103

Metal and Steel Factory

The General Manager,
Ishapore
Ishapore
Ishapur, West Bengal
743144

Name	Code	Quantity	Approx Value	Select
FERROUS AND NON FERROUS BASED ON MASTER ALLOY Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

61924

ADV_206_136

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
I I TUBE Description 18mm Image Intensifier tubes Specification 18mm Image Intensifier tubes Drawing no. Manufacturing Technology Testing / Inspection Facility
SLIDE (FORGING) FOR 0.32 PISTOL Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY (FORGING) FOR .315 SPORTING RIFLE Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING OF LUG 500KG FOR 12 BORE MODIFIED PAG Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING OF PISTON EXTENSION FOR RIFLE 5.56MM INSAS Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility

61925

ADV_106_102

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON P.U.COATED 250 GMS. OG 100 CMS. WIDTH Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 60 GRAM P.U. COATED O.G. 135 CM. WIDE Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 48 GMS OG P.U.COATED 122 CM. WIDTH Description MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 Specification MASS/M2-48+-2 GMS., B.S.- 65KGS, WRAP-55KGS, WEFT-PLAIN,THICKNESS-0.08 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 250 GSM DISRUPTIVE PATTERN P.U. COATED 140/142 CMS. WIDE Description IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH Specification IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 250 GSM POLYURATHENE COATED DISRUPTIVE 91 CMS. Description VARIETY NO. 2 OF DMSRDE/T&GS/89/377 (b) Specification VARIETY NO. 2 OF DMSRDE/T&GS/89/377 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 250 GRMS. DISRUPTIVE POLYURETHENE COATED 135/136 CMS. Description IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- Specification IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/- Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 250 GMS DISRUPTIVE BSF PATTERN P.U.COATED 135/136 CMS. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC NYLON 250 GMS. BLACK PU COATED 135/136 CMS. Description IND/TC/0155 Specification IND/TC/0155 Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Air Tank Complete (LPTA -219843200101 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy.spacer block LPTA- X 9051-20-0000V2 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility

61926

ADV_115_123

Ordnance Factory Dumdum

The General Manager,
Dum Dum
Dum Dum
Kolkata, West Bengal
700028

Name	Code	Quantity	Approx Value	Select
FIN ASSEMBLY IN FC FOR TU-1111 Description DET NO.14, ARDE-2139 Specification DET NO.14, ARDE-2139 Drawing no. Manufacturing Technology Testing / Inspection Facility
STABILIZER FIN FOR 125mm HEAT Description OFDC SK NO.1130(a) Specification OFDC SK NO.1130(a) Drawing no. Manufacturing Technology Testing / Inspection Facility
FIN ASSEMBLY FOR TU-1111 Description DET NO.14, ARDE-2139 Specification DET NO.14, ARDE-2139 Drawing no. Manufacturing Technology Testing / Inspection Facility

61927

ADV_50_133

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
GENERAL FABRICATION Description - do - Specification - do - Drawing no. Manufacturing Technology Testing / Inspection Facility
ASSEMBLIES AND SUB-ASSEMBLIES Description - do - Specification - do - Drawing no. Manufacturing Technology Testing / Inspection Facility
PRECISION MACHINING OF COMPONENTS Description As per drawing Specification As per drawing Drawing no. Manufacturing Technology Testing / Inspection Facility
LIGHT FIXTURE Description PLT-50-6TY Specification PLT-50-6TY Drawing no. Manufacturing Technology Testing / Inspection Facility

61928

ADV_453_115

Ordnance Factory Muradnagar

The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206

Name	Code	Quantity	Approx Value	Select
PROOF MACHINED FORGED BOMB BODY 81mm Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
TA SHOE (AS FORGE AS WELL AS COMPLETE CONDITION) Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
TA GUIDE ( AS FORGE AS WELL AS COMPLETE CONDITION) Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING OF 81 MM BOMB BODY (FRONT & REAR PART) Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
Brackt Fuel Tank -x 7184610 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility

61929

ADV_880_101

Ammunition Factory Khadki

The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003

Name	Code	Quantity	Approx Value	Select
AMMUNITION CONTAINER BOX B-9 A STEEL TO DESIGNER REF ARDE 2174 PT. NO. ISV 553A SPECN. IA 1169 Description IA 1169 Specification IA 1169 Drawing no. Manufacturing Technology Testing / Inspection Facility
AMMUNITION CONTAINER BOX B-9 A STEEL TO DESIGNER REF ARDE 2174 PT. NO. ISV 553A SPECN. IA 1169 Description IA 1169 Specification IA 1169 Drawing no. Manufacturing Technology Testing / Inspection Facility
MANUFACTURING OF 81 MM HE (FRONT PART & REAR PART) Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF TA BOLT Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF TA CLAMP Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF TA GUIDE Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF TA SHOE Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF TA LINK Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MACHINING OF 81 MM BOMB BODY Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
DESIGN DEVELOPMENT AND MANUFACTURING OF ELECTRONIC SYSTEMS SUCH AS SIGNAL ANALYSER TRANSITION BOARD Description As per requirement Specification As per requirement Drawing no. Manufacturing Technology Testing / Inspection Facility
APC NO. 5 (CASHEW POLYMER) (CEMENT RD 1286 AMMN) TO SPECN. JSS:8030-20: 2009 Description JSS:8030-20: 2009 Specification JSS:8030-20: 2009 Drawing no. Manufacturing Technology Testing / Inspection Facility
APC NO. 210 UNDYED (LACQUER NITRO CELLULOSE UNDYED) SPECN. JSS 8010-64: 2009 Description JSS 8010-64: 2009 Specification JSS 8010-64: 2009 Drawing no. Manufacturing Technology Testing / Inspection Facility
APC NO. 210 (NC LACQUOR UNDYED) SPECN. JSS 8010-64: 2009 ( FOR CIVIL TRADE ) Description JSS 8010-64: 2009 Specification JSS 8010-64: 2009 Drawing no. Manufacturing Technology Testing / Inspection Facility
APC NO. 215 (VARNISH) SPECN. JSS 8010 -51: 2009 Description JSS 8010 -51: 2009 Specification JSS 8010 -51: 2009 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS TUBES (SEAMLESS) OD 6MM ID 5MM SPECN. JSS: -9535-02:2008 & PHYS. PROP. TO SPECN. IS 407-1981 Description JSS: -9535-02:2008 & PHYS. PROP. TO SPECN. IS 407-1981 Specification JSS: -9535-02:2008 & PHYS. PROP. TO SPECN. IS 407-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP 0.15mm THICK X 19.5mm WIDE SPECN. IS:410-1977 3RD REV. DESGN. Cu Zn 37, CONDITION HB Description IS:410-1977 Specification IS:410-1977 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP 0.30 mm THICK X 75 mm WIDE SPECN. JSS - 9535-02 - 2008 Description JSS - 9535-02 - 2008 Specification JSS - 9535-02 - 2008 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP 0.40mm X 38mm WIDE ANNEALED SPECN JSS-9535-02 - 2008 Description JSS-9535-02 - 2008 Specification JSS-9535-02 - 2008 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP 0.47 MM X 35.6 MM WIDE SPECN:JSS-9535-02-2008 Description JSS-9535-02-2008 Specification JSS-9535-02-2008 Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP 0.42 MM THICK X 39.5 MM WIDE SPECN. JSS-9535-02-2008 Description JSS-9535-02-2008 Specification JSS-9535-02-2008 Drawing no. Manufacturing Technology Testing / Inspection Facility
LATEX FOAM VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FOAM VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
LATEX FOAM VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
STABILIZER FIN FOR 125mm HEAT Description OFDC SK NO.1130-A Specification OFDC SK NO.1130-A Drawing no. Manufacturing Technology Testing / Inspection Facility
STABILIZER FIN FOR 125mm HEAT Description OFDC SK NO.1130-A Specification OFDC SK NO.1130-A Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING STABILIZER BODY FOR 125MM HEAT Description OFDC DRG.NO. 1559(f) Specification OFDC DRG.NO. 1559(f) Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING STABILIZER BODY FOR 125MM HEAT Description OFDC SKETCH NO. 1559(f) Specification OFDC SKETCH NO. 1559(f) Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL FLAT 50MM X 38MM RD. X 68MM LONG(EN-24) Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
PRECISION MECHANICAL JOBS OF MILLING TURNING AND DRILLING Description As per drawing Specification As per drawing Drawing no. Manufacturing Technology Testing / Inspection Facility

61930

ADV_417_107

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
PISTOL BOX TO DRG. NO. M - 9881/B IN F/C. Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
HOLSTER MADE OF BLACK CALF LEATHER TO DRG. NO. - M - 10848 IN F/C. Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
WEAPON COVER COMPLETE TO DRG. NO. GF - 215060 Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
LEAD PIG FOR CIVIL TRADE ONLY GRADE Pb 99.94 SPECN IS: 27-1992 (FOURTH REV) WITH AMENDMENT. NO. 1 Description IS: 27 - 1992 Specification IS: 27 - 1992 Drawing no. Manufacturing Technology Testing / Inspection Facility
LEAD PIG GRADE Pb 99.94 SPECN. IS: 27 - 1992 (FOURTH REV). WITH AMENDMENT. NO. 1 Description IS: 27 - 1992 Specification IS: 27 - 1992 Drawing no. Manufacturing Technology Testing / Inspection Facility
PLUG REAR TO DRG. NO. ITV - 52 IN F/C. Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
MECHANICAL PRECISION COMPONENTS Description As per drawing Specification As per drawing Drawing no. Manufacturing Technology Testing / Inspection Facility

61931

ADV_44_113

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity	Approx Value	Select
EXPLODER CASE (30Z-15DR) Description EXPLODER CASE (30Z-15DR) TO DRG.NO. ARM 1172B28 R.NO. 5 DT. 15/5/86 & CAP FOR EXPLODER CASE TO DRG.NO. ARM 1172A26 R.NO. 3 DT. 24/11/79 Specification EXPLODER CASE (30Z-15DR) TO DRG.NO. ARM 1172B28 R.NO. 5 DT. 15/5/86 & CAP FOR EXPLODER CASE TO DRG.NO. ARM 1172A26 R.NO. 3 DT. 24/11/79 Drawing no. Manufacturing Technology Testing / Inspection Facility
DELAY TUBE- EMPTY FOR DETONATOR 36M-4SEC. Description DELAY TUBE (EMPTY) TO DRG.NO. IQX-943 DC 37296-A DT. 27/12/2011 FOR DETONATOR 36M 4 SEC. Specification DELAY TUBE (EMPTY) TO DRG.NO. IQX-943 DC 37296-A DT. 27/12/2011 FOR DETONATOR 36M 4 SEC. Drawing no. Manufacturing Technology Testing / Inspection Facility
BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 Description BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Specification BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Drawing no. Manufacturing Technology Testing / Inspection Facility
BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 Description BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Specification BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Drawing no. Manufacturing Technology Testing / Inspection Facility
BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 Description BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Specification BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540 Drawing no. Manufacturing Technology Testing / Inspection Facility
BANGALORE TORPEDO 38MM 2M EMPTY MK2/L Description DRG.PT.NO. TX-10 GE DC(I)-33719-A DT. 6/2/85 SPECN: IA-1231(g) DC(I)-35128-A DT. 4/7/91 Specification DRG.PT.NO. TX-10 GE DC(I)-33719-A DT. 6/2/85 SPECN: IA-1231(g) DC(I)-35128-A DT. 4/7/91 Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY ASSY FOR 81MM SMK Description BODY ASSY TO DRG.NO. 4-26941-060cb DC 34269-A DTD. 17/11/87 Specification BODY ASSY TO DRG.NO. 4-26941-060cb DC 34269-A DTD. 17/11/87 Drawing no. Manufacturing Technology Testing / Inspection Facility
DIE CASTING OF TRIGGER HOUSING FOR PUMP ACTION GUN Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
FOLDABLE BUTT FOR RIFLE 5.56MM INSAS Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
UNIT BURST CONTROL FOR RIFLE 5.56MM INSAS Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
Disc Wheel & Rim 9X20 for STLN MK- IV BS-III Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility

Proceed