MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

65681

ADV_453_115

Ordnance Factory Muradnagar

The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206

Name	Code	Quantity	Approx Value	Select
FORGING OF TA CLAMP Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING OF TA SHOE Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING OF TA GUIDE Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
PROOF MACHINED FORGED BOMB BODY 81MM Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

65682

ADV_4_108

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 CM Description As per requirements & specifications Specification As per requirements & specifications Drawing no. Manufacturing Technology Testing / Inspection Facility

65683

ADV_903_131

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
Steel Forging - (Forging Weight ranging from 5Kg. to 30 Kg). Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Forging for Drive Shaft Rear Axle side - 257428307901-3(R2) Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Forging for Flange Axle Housing- 260435105102-3(RI) Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Forging of Follower - 003223370417-50 Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Forging for Coupling Flange Front Axle LPTA- 715- 3122622045-3(A) Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Forging for Coupling Flange Rear Axle LPTA- 715- 273035305001-3 Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Torsion Bar- 264189107903 RH & 264189107904 N LH Description As per Specification/ Drawings Specification As per Specification/ Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
352 Dia Driven Disc Cover Part No./Drg No. 275225000103 for LPTA - 715 BS- III Vehicle Description As per Specification /Drawings. Specification As per Specification /Drawings. Drawing no. Manufacturing Technology Testing / Inspection Facility

65684

ADV_417_107

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
BLANK FOR DISTANCE TUBE Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR BODY CASTING Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR DISTANCE TUBE Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR BODY CASTING Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR DISTANCE TUBE Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR BODY CASTING Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

65685

ADV_32_114

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
All type of Rubber Items Description As per required specification IS/BIS Specification As per required specification IS/BIS Drawing no. Manufacturing Technology Testing / Inspection Facility

65686

ADV_651_117

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
23.SPLIT PIN HALLOW HALF Description DS CAT NO. 5315-001523 Specification DS CAT NO. 5315-001523 Drawing no. Manufacturing Technology Testing / Inspection Facility
22.PIN RETAINING CATCH FEED COVER Description DS CAT NO. 5315-001520 Specification DS CAT NO. 5315-001520 Drawing no. Manufacturing Technology Testing / Inspection Facility
21.PIN STIRUP RETAINING FORESIGHT Description DS CAT NO. 5315-001506 Specification DS CAT NO. 5315-001506 Drawing no. Manufacturing Technology Testing / Inspection Facility
20.SCREW MACHINE FOR PLUG OBTURATING HOLE Description DS CAST NO. 5305-011218 Specification DS CAST NO. 5305-011218 Drawing no. Manufacturing Technology Testing / Inspection Facility
19.PIN SEAR TRIPPER Description DS CAT NO. 5315-001540 Specification DS CAT NO. 5315-001540 Drawing no. Manufacturing Technology Testing / Inspection Facility
18. FRONT AND REAR FEED PAWL SPRING Description DS CAT NO. 5360-000515 Specification DS CAT NO. 5360-000515 Drawing no. Manufacturing Technology Testing / Inspection Facility
17. WASHER Description DS CAT NO. 5310-002664 Specification DS CAT NO. 5310-002664 Drawing no. Manufacturing Technology Testing / Inspection Facility
16. CENTRAL PAWL AXIS Description DS CAT NO. 5315-001512 Specification DS CAT NO. 5315-001512 Drawing no. Manufacturing Technology Testing / Inspection Facility
15. SPINDLE HANDLE Description DS CAT NO. 1005-006619 Specification DS CAT NO. 1005-006619 Drawing no. Manufacturing Technology Testing / Inspection Facility
14.BUSHING BLANK Description DS CAT NO. 5340-009974 Specification DS CAT NO. 5340-009974 Drawing no. Manufacturing Technology Testing / Inspection Facility
13. REAR FEED PAWL AXIS Description DS CAT NO. 5315-001513 Specification DS CAT NO. 5315-001513 Drawing no. Manufacturing Technology Testing / Inspection Facility
12. STOP SCREW REAR SIGHT CURSOR Description DS CAT NO. 5305-004282 Specification DS CAT NO. 5305-004282 Drawing no. Manufacturing Technology Testing / Inspection Facility
11. PIN SECURING SPINDLE Description DS CAT NO. 5315-004846 Specification DS CAT NO. 5315-004846 Drawing no. Manufacturing Technology Testing / Inspection Facility
10. BUFFER PLATE Description DS CAT NO. 1005-000573 Specification DS CAT NO. 1005-000573 Drawing no. Manufacturing Technology Testing / Inspection Facility
9. STOP PIN EJECTOR Description DS CAT NO. 5315-001527 Specification DS CAT NO. 5315-001527 Drawing no. Manufacturing Technology Testing / Inspection Facility
8. RIVET FRONT GUIDE MEDIUM Description DS CAT NO. 5320-002936 Specification DS CAT NO. 5320-002936 Drawing no. Manufacturing Technology Testing / Inspection Facility
7. PIN RETAINING GAS CYLINDER Description DS CAT NO. 5315-001518 Specification DS CAT NO. 5315-001518 Drawing no. Manufacturing Technology Testing / Inspection Facility
6. SPRING ADJUSTING SCREW FPRESIGHT HOUSING BLOCK Description DS CAT NO. 5310-000511 Specification DS CAT NO. 5310-000511 Drawing no. Manufacturing Technology Testing / Inspection Facility
5. WASHER Description DS CAT NO. 5310-002664 Specification DS CAT NO. 5310-002664 Drawing no. Manufacturing Technology Testing / Inspection Facility
4. PIN RETAINING CATCH FEED COVER Description DS CAT NO. 5315-001520 Specification DS CAT NO. 5315-001520 Drawing no. Manufacturing Technology Testing / Inspection Facility
3. SLEEVE BOLT COVER Description DS CAT NO. 1005-006624 Specification DS CAT NO. 1005-006624 Drawing no. Manufacturing Technology Testing / Inspection Facility
2. CONTROL SPRING CATRIDGE SPRING PAWL Description DS CAT NO. 5360-000517 Specification DS CAT NO. 5360-000517 Drawing no. Manufacturing Technology Testing / Inspection Facility
1 . PIN CATCH REAR SIGHT Description DS CAT NO.5315-001502 Specification DS CAT NO.5315-001502 Drawing no. Manufacturing Technology Testing / Inspection Facility

65687

ADV_294_119

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
STEEL FORGINGS FOR BOMB BODY 81MM / SEMI FINISHED Description As per Specifications/Drawings/ Requirements Specification As per Specifications/Drawings/ Requirements Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL FORGINGS WEIGHING UPTO 30KGS. Description As per Specifications/Drawings/ Requirements Specification As per Specifications/Drawings/ Requirements Drawing no. Manufacturing Technology Testing / Inspection Facility

65688

ADV_44_113

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity	Approx Value	Select
BRASS STRIP 48X1.1 MM Description BRASS STRIP 48 +/- 0.40MM WIDE X 1.1 +/- 0.02MM THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN. SPECN: BS-2870 CZ-108, BRINELL HARDNESS: 80-120. Specification BRASS STRIP 48 +/- 0.40MM WIDE X 1.1 +/- 0.02MM THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN. SPECN: BS-2870 CZ-108, BRINELL HARDNESS: 80-120. Drawing no. Manufacturing Technology Testing / Inspection Facility
Machined Hub Rear -(SG Iron) STLN - F 1880122 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Machined Clutch LPTA - 272425100117 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Machined Clutch STLN - FOR00122& B 1301401 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Spring Shackle Rear - 3523200163F Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Spring Shackle Front - 3523200063 Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
Full set of Bullet Proof Glass (Army & MHA) Description As per specification / Drawings Specification As per specification / Drawings Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF 8 COMPONENTS FOR FUZE 104 Description SET OF 8 COMPONENTS FOR FUZE FZ-104 COMPRISING OF FOLLOWING ITEMS (i) POWDER DISC DESIGNERS REF. 5078698 (ii) MAGAZINE DESIGNERS REF. 6171333 (iii) ROTOR DESIGNERS REF. 6171350 (iv) DELAY DESIGNERS REF. 6171348 (v) TOP PIN DESIGNERS REF. 6190331 (vi) DELAY SLEEVE DESIGNERS REF. 6190521 (vii) (a) STRIKER ALUMINIUM DESIGNERS REF. 6171345 (b) STIRRUP SPRING DESIGNERS REF. 6160360 (viii) FUZE BODY DESIGNERS REF. 5078705 Specification SET OF 8 COMPONENTS FOR FUZE FZ-104 COMPRISING OF FOLLOWING ITEMS (i) POWDER DISC DESIGNERS REF. 5078698 (ii) MAGAZINE DESIGNERS REF. 6171333 (iii) ROTOR DESIGNERS REF. 6171350 (iv) DELAY DESIGNERS REF. 6171348 (v) TOP PIN DESIGNERS REF. 6190331 (vi) DELAY SLEEVE DESIGNERS REF. 6190521 (vii) (a) STRIKER ALUMINIUM DESIGNERS REF. 6171345 (b) STIRRUP SPRING DESIGNERS REF. 6160360 (viii) FUZE BODY DESIGNERS REF. 5078705 Drawing no. Manufacturing Technology Testing / Inspection Facility
30MM ADEN SHELL Description 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Specification 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Drawing no. Manufacturing Technology Testing / Inspection Facility
ROTOR & DELAY FOR FZ 104 Description ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Specification ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Drawing no. Manufacturing Technology Testing / Inspection Facility
STRIKER & STIRRUP SPRING FOR FZ 104 Description STRIKER & STIRRUP SPRING ASSEMBLY TO DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Specification STRIKER & STIRRUP SPRING ASSEMBLY TO DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY WITH BAND-SHELL APT-30MM BMP-II Description BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Specification BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Drawing no. Manufacturing Technology Testing / Inspection Facility
30MM ADEN SHELL Description 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Specification 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Drawing no. Manufacturing Technology Testing / Inspection Facility
ROTOR & DELAY FOR FZ 104 Description ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Specification ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Drawing no. Manufacturing Technology Testing / Inspection Facility
STRIKER & STIRRUP SPRING ASSEMBLY Description STRIKER & STIRRUP SPRING ASSEMBLY TO DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Specification STRIKER & STIRRUP SPRING ASSEMBLY TO DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY WITH BAND-SHELL APT-30MM BMP-II Description BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Specification BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Drawing no. Manufacturing Technology Testing / Inspection Facility
30MM ADEN SHELL Description 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Specification 30MM ADEN SHELL (PRACTICE) TO DRG.NO. D6(L)1342/G ISSUE-8 DATE 08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRING. DETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO. Kh 2635 2. COPPER DRIVING BAND TO DRG.NO. TRD-122338 3. PLUG FIRING TO DRG.NO. D6(L) 1338 ISSUE-13 DATE 08/03 Drawing no. Manufacturing Technology Testing / Inspection Facility
ROTOR & DELAY FOR FZ 104 Description ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Specification ROTOR TO DRG.NO. 6171350 DC 26789-A DT. 22/11/63 DELAY TO DRG.NO. 6171348 Drawing no. Manufacturing Technology Testing / Inspection Facility
STRIKER & STIRRUP SPRING ASSEMBLY Description DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Specification DRG.NO. 6171347 DC 28849-A DT. 23/04/68 CONSISTING OF STRIKER TO DRG.NO. 6171345 DC 36603-A DT. 13/10/99 & STIRRUP SPRING TO DRG.NO. 6160360 DC 37078-A DT. 13/11/06 Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY WITH BAND-SHELL APT-30MM BMP-II Description BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Specification BODY WITH BAND ASSY TO DRG.NO. bW 5.500.113 cb/C DC NO.-34183-A DT. 28/7/87 SPECN: PROGRAMME AND TEST PROCEDURE AS PER SHEET NO. bW 5.500.113 M/C (9 SHEETS) DC-34183-A DTD. 28/7/87. Drawing no. Manufacturing Technology Testing / Inspection Facility

65689

ADV_956_142

Ordnance Factory Dehu Road

The Cheif General Manager
Dehu Road
Dehu Road
Maharashtra
412101

Name	Code	Quantity	Approx Value	Select
Auxiliary Spring for 81mm Illg. MK-II Description DRG NO ARDE 2222 DET 12 PT NO ITV 260DC 37039A,SPECN.NO.CQA(A) 2345 (C) DC-36513A DT.25-1-99. Specification DRG NO ARDE 2222 DET 12 PT NO ITV 260DC 37039A,SPECN.NO.CQA(A) 2345 (C) DC-36513A DT.25-1-99. Drawing no. Manufacturing Technology Testing / Inspection Facility
Bomb Body Complete for Bomb 120mm Flash Description DRG. NO.ARDE 2040, PART NO. ITV-174 DET NO.2 DC - 33880 - A DTD. 07/01/1986 AND DRG. NO. CIA/AMN/1913 PT. NO. ITV 77 DC 35943A DT. 29/03/95 WITH NOSE ADAPTER TO PT. NO. ITV-176 DET. NO. 4 DC-33880 DT. 07/01/1986. Specification DRG. NO.ARDE 2040, PART NO. ITV-174 DET NO.2 DC - 33880 - A DTD. 07/01/1986 AND DRG. NO. CIA/AMN/1913 PT. NO. ITV 77 DC 35943A DT. 29/03/95 WITH NOSE ADAPTER TO PT. NO. ITV-176 DET. NO. 4 DC-33880 DT. 07/01/1986. Drawing no. Manufacturing Technology Testing / Inspection Facility
Auxiliary Spring for 81mm Illg.MK-II Description DRG NO ARDE 2222 DET 12 PT NO ITV 260 DC 37039A,SPECN.NO.CQA(A) 2345 (C) DC-36513A DT.25-1-99. Specification DRG NO ARDE 2222 DET 12 PT NO ITV 260 DC 37039A,SPECN.NO.CQA(A) 2345 (C) DC-36513A DT.25-1-99. Drawing no. Manufacturing Technology Testing / Inspection Facility
DELAY TUBE FOR 51MM ILLG. Description ARDE-2064 Specification ARDE-2064 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOTTOM PLATE WITH SWIVEL FOR 84MM ILLG. Description F 1301-903400G DRG. NO. 1301-054860 F Specification F 1301-903400G DRG. NO. 1301-054860 F Drawing no. Manufacturing Technology Testing / Inspection Facility
BASE PLATE FOR 51MM ILLG. 2A Description CQA(A) 2328 (c) DRG. NO. ARDE 2064 DET 14 PT.NO. ITV 231 Specification CQA(A) 2328 (c) DRG. NO. ARDE 2064 DET 14 PT.NO. ITV 231 Drawing no. Manufacturing Technology Testing / Inspection Facility
BAFFLE PLATE FOR 81MM ILLG. MK-II Description DRG. NO. ARDE 1965 DET 15 PT.NO. ITV 125, DC 37039A DT. 25.01.2006 Specification DRG. NO. ARDE 1965 DET 15 PT.NO. ITV 125, DC 37039A DT. 25.01.2006 Drawing no. Manufacturing Technology Testing / Inspection Facility
HALF CUP FOR M.B. 120MM ILLG. Description DRG. NO. CIA.AMN/2158 PART. NO. ISV 1740 DC-34065-A Specification DRG. NO. CIA.AMN/2158 PART. NO. ISV 1740 DC-34065-A Drawing no. Manufacturing Technology Testing / Inspection Facility
CUP HALF ASSY. FOR 81MM ILLG. Description CQA(A) 2345(c) DRG. NO. ARDE 2222 PT. NO. ITV 257 Specification CQA(A) 2345(c) DRG. NO. ARDE 2222 PT. NO. ITV 257 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONTAINER STAR FOR 81MM ILLG. Description CQA(A) 2345 DRG. NO. ARDE 1965 DET 12 PT. NO. ITV 122 Specification CQA(A) 2345 DRG. NO. ARDE 1965 DET 12 PT. NO. ITV 122 Drawing no. Manufacturing Technology Testing / Inspection Facility
EMPTY COMP. FOR BASE BLEED IGNITER Description 2676-300002A203 Specification 2676-300002A203 Drawing no. Manufacturing Technology Testing / Inspection Facility
COVER FOR SHELL 84MM ILLG. Description F 1301-903340 DRG. NO. 1301-047932B Specification F 1301-903340 DRG. NO. 1301-047932B Drawing no. Manufacturing Technology Testing / Inspection Facility
CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1 Description DRG. NO. 2440A13003 DC-36552-A Specification DRG. NO. 2440A13003 DC-36552-A Drawing no. Manufacturing Technology Testing / Inspection Facility
CASE CANDLE ASSY. FOR SHELL 155MM ILLG. M1A1 Description DRG. NO. 2440A20008 Specification DRG. NO. 2440A20008 Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF 8 COMP. FOR SHELL 105MM IFG BE SMOKE Description CQA(A) 2346(c) Specification CQA(A) 2346(c) Drawing no. Manufacturing Technology Testing / Inspection Facility

Proceed