50081
ADV_106_102
Ordnance Equipment Factory
The General Manager,
50082
ADV_978_112
Ordnance Factory Katni
The General Manager,
Name
Code
Quantity
Approx Value
Select
Brass Strips (70/30)
Description
Brass Strips (70/30) of thickness 3.55mm to 4.22mm
Specification
Brass Strips (70/30) of thickness 3.55mm to 4.22mm
Testing / Inspection Facility
Cold Rolled Gilding Metal (90/10) coil/strips
Description
Cold Rold Gilding Metal (90/10) coil/strips of thickness from 0.5mm to 4.22 mm thickness
Specification
Cold Rold Gilding Metal (90/10) coil/strips of thickness from 0.5mm to 4.22 mm thickness
Testing / Inspection Facility
50083
ADV_32_114
Ordnance Factory Dehradun
The General Manager,
50084
ADV_4_108
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Name
Code
Quantity
Approx Value
Select
Fab. Nylon Low Porosity 52 GM ODS 94 cm
Description
As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)
Specification
As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)
Testing / Inspection Facility
Fab. Nylon 75 GMS U/D 91 cm width
Description
Prov. Specn. No. ADRDE/SPECN.1980/5(a) and Annexure A
Specification
Prov. Specn. No. ADRDE/SPECN.1980/5(a) and Annexure A
Testing / Inspection Facility
50085
ADV_259_138
Grey Iron Foundry
The General Manager,
Name
Code
Quantity
Approx Value
Select
Forged Head (Un-Machined)
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
Forged Head (Un- Machined )
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
Casing for 100/120 Kg Aerial Bombs
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
50086
ADV_475_104
Gun Carriage Factory
The General Manager,
50087
ADV_658_135
Engine Factory Avadi
Chennai
50088
ADV_44_113
Ordnance Factory Khamaria
The Cheif General Manager
Name
Code
Quantity
Approx Value
Select
TWIN CONTAINER 520.9 DRG.NO. TRD-422155 (9911357801)
Description
TWIN CONTAINER 520.9 TO DRG NO.02032398/DRG NO.TRD-422155
Specification
TWIN CONTAINER 520.9 TO DRG NO.02032398/DRG NO.TRD-422155
Testing / Inspection Facility
MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)
Description
MANTLE TO DRG.NO.TRD-2-2-2271
Specification
MANTLE TO DRG.NO.TRD-2-2-2271
Testing / Inspection Facility
CONTAINER PLASTIC P-17D (23MM PPL) (9911356890)
Description
PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITH ONE NO EACH OF THE FOLLOWING PACKING FITMENTS:- (a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 ( b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LABLE TO DRG NO KhFQ-110645
Specification
PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITH ONE NO EACH OF THE FOLLOWING PACKING FITMENTS:- (a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 ( b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LABLE TO DRG NO KhFQ-110645
Testing / Inspection Facility
BOX 520:9 EMPTY ASSY DRG TRD 222169 (9911357802)
Description
BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.
Specification
BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.
Testing / Inspection Facility
CONTAINER PLASTIC NO. P-17 FOR PPLT (9911356689)
Description
CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1. DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHENE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO. 2. DISC SIZE 74MM X 0.08MM THICK COPPER FOIL TO SPECN:IS-191 DHP-I - 01 NO. 3. SLEEVE TO DRG.NO.TRD 1-1-2080 - 01 NO. 4. HOLDING PIECE TO DRG.NO.TRD 1-1-2081 - 01 NO. 5. LABLE TO DRG.NO.TRD 1-1-2082 - 01 NO.
Specification
CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1. DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHENE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO. 2. DISC SIZE 74MM X 0.08MM THICK COPPER FOIL TO SPECN:IS-191 DHP-I - 01 NO. 3. SLEEVE TO DRG.NO.TRD 1-1-2080 - 01 NO. 4. HOLDING PIECE TO DRG.NO.TRD 1-1-2081 - 01 NO. 5. LABLE TO DRG.NO.TRD 1-1-2082 - 01 NO.
Testing / Inspection Facility
CARRIER 11A ISV-468A FOR HE & ILLU. (6573810100)
Description
CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-A DT 7/11/96
Specification
CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-A DT 7/11/96
Testing / Inspection Facility
50089
ADV_568_105
Rifle Factory Ishapur
The General Manager,
50090
ADV_50_133
Ordnance Factory Medak
The General Manager
Name
Code
Quantity
Approx Value
Select
PROOF MACHINING
Description
As per drawing
Specification
As per drawing
Testing / Inspection Facility
ANNEALING
Testing / Inspection Facility
FORGINGS
Description
As per requirement
Specification
As per requirement
Testing / Inspection Facility
Casing for 100/120 Kg Aerial Bombs
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
Casing for 100/120 Kg Aerial Bombs
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
Machining of Cylinder
Description
As per Drg. & Specification
Specification
As per Drg. & Specification
Testing / Inspection Facility
50091
ADV_619_128
Ordnance Factory Tiruchirapalli
The General Manager,
Name
Code
Quantity
Approx Value
Select
RAM ROD ASSEMBLY
Description
AS PER DRAWING/SPECIFICATION
Specification
AS PER DRAWING/SPECIFICATION
Testing / Inspection Facility
CARTG. PP3 EOFE EMPTY ASSY TRD-1279 (9911351544)
Description
CARTG PP3 EOFE EMPTY ASSY TO DRG.NO. TRD-1279
Specification
CARTG PP3 EOFE EMPTY ASSY TO DRG.NO. TRD-1279
Testing / Inspection Facility
PLUNGER BLANK FOR HEAT-551 (9911357919)
Description
DRG.NO. 6417 888/DRG.NO. TRD-1-2-2293
Specification
DRG.NO. 6417 888/DRG.NO. TRD-1-2-2293
Testing / Inspection Facility
PRIMER GASKET F1301 036530 D LF 2013436143
Description
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
Specification
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
Testing / Inspection Facility
20
Number
CONTAINER 12-B/L FOR 40MM L/70, PFFC (9911350355)
Description
AMMUNITION CONTAINER 12-B/L DRG. PT NO. ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805 (h) DC NO. 36145-A
Specification
AMMUNITION CONTAINER 12-B/L DRG. PT NO. ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805 (h) DC NO. 36145-A
Testing / Inspection Facility
CONTAINER 12 B L FOR 40MM L 70 PFFC LF 9911350355
Description
AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED/SUPPLIED BY NEW SOURCE/FIRM
Specification
AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED/SUPPLIED BY NEW SOURCE/FIRM
Drawing no.
AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED
Testing / Inspection Facility
99
Number
50092
ADV_956_142
Ordnance Factory Dehu Road
The Cheif General Manager
Name
Code
Quantity
Approx Value
Select
SET OF COMPONENTS FOR PINAKA IGNITERS CONSISTING OF (1) CUP MOULDED WITH PINS (2) LID
Description
DRG. NO. HEMRL/IGN/PINAKA/DRG.006 DET NO. 4 DT. 11/05/2015 & DRG. NO. HEMRL/IGN/PINAKA/DRG.006, DET.NO. 16 DT. 11/05/2015 SPECN: HEMRL/IGN/PS-406
Specification
DRG. NO. HEMRL/IGN/PINAKA/DRG.006 DET NO. 4 DT. 11/05/2015 & DRG. NO. HEMRL/IGN/PINAKA/DRG.006, DET.NO. 16 DT. 11/05/2015 SPECN: HEMRL/IGN/PS-406
Testing / Inspection Facility
FASTENER HOOK & LOOP or VALCRO VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
PIN TENT CARBON STEEL SMALL 8340-000508
Description
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Specification
IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED
Testing / Inspection Facility
DEES STEEL VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
U PIN
Description
CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986
Specification
CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986
Testing / Inspection Facility
PIN TENT ANGLE IRON MED.MK-II
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Testing / Inspection Facility
TWISTED PINS
Description
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
Specification
PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
Testing / Inspection Facility
SPRING HELICAL COMPRESSION
Description
C-1036 TO DS CAT No. 5360-007793 Drg. No. 2A42 01 036
Specification
C-1036 TO DS CAT No. 5360-007793 Drg. No. 2A42 01 036
Testing / Inspection Facility
CORBON STEEL
Testing / Inspection Facility
ALLOY STEEL
Testing / Inspection Facility
STAINLESS STEEL
Testing / Inspection Facility
TOOL STEEL
Description
AS PER ASTM, DIN, BS, IS, AFNOR, JIS, GHOST AND ALL OTHER REPUTED INTERNATIONAL STANDARDS
Specification
AS PER ASTM, DIN, BS, IS, AFNOR, JIS, GHOST AND ALL OTHER REPUTED INTERNATIONAL STANDARDS
Testing / Inspection Facility
Extractor for 0.315 Sporting Rifle
Description
Drg. No. 29P 0020*2
Specification
Drg. No. 29P 0020*2
Testing / Inspection Facility
Head Breech Bolt for 0.315 Sporting Rifle
Description
Drg. No. TEND 2045
Specification
Drg. No. TEND 2045
Testing / Inspection Facility
50093
ADV_269_137
Ordnance Factory Bolangir
The Cheif General Manager
Name
Code
Quantity
Approx Value
Select
DISC
Description
DRG. NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
Specification
DRG. NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
Testing / Inspection Facility
DISC PWF(0.79 inch 20.07MM DIA, 0.051MM THICK
Description
JSS:9310-06:2002 REAFFIRMED 2011 DESIGNERS REF. NO.CIA/AMN/1435, PART NO:IQX 136 DC. NO.36662-A Dt.23.03.2000.GF. ITEM NO.3
Specification
JSS:9310-06:2002 REAFFIRMED 2011 DESIGNERS REF. NO.CIA/AMN/1435, PART NO:IQX 136 DC. NO.36662-A Dt.23.03.2000.GF. ITEM NO.3
Testing / Inspection Facility
NORMAL COVER
Description
DRG.3-022483/54-bH-482/Cd18, DC NO.36134-A, DTD.04.07.96
Specification
DRG.3-022483/54-bH-482/Cd18, DC NO.36134-A, DTD.04.07.96
Testing / Inspection Facility
DISC-II NO.23
Description
OST-84-796-78, INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007, REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.
Specification
OST-84-796-78, INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007, REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.
Testing / Inspection Facility
WASHER
Description
DRG NO.155-1120, DC NO-36792-A, DT.01.11.2001
Specification
DRG NO.155-1120, DC NO-36792-A, DT.01.11.2001
Testing / Inspection Facility
DISC D=18B7MM X 0.5 TO 0.9 MM THICK
Description
MATERIAL SPECN. TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01:2014, REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN.JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT.12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3EP4000 FOR AP/T & 4-027044 30P 2000 SHEET-2 FOR HE/T
Specification
MATERIAL SPECN. TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01:2014, REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN.JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT.12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3EP4000 FOR AP/T & 4-027044 30P 2000 SHEET-2 FOR HE/T
Testing / Inspection Facility
MIIL BOARD (WAXED),290x200x2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD
Description
JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS-9160-09:2010 REV-1 DC:5024-ME DT.01.08.11
Specification
JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS-9160-09:2010 REV-1 DC:5024-ME DT.01.08.11
Testing / Inspection Facility
MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT)
Description
USING MATERIAL SPECN. MILL BOARD TO JSS-9310-01:2014:REV-3 DC NO.5290 ME DT.16.12.14 & PARAFFIN WAX AMMN. TO JSS:9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.
Specification
USING MATERIAL SPECN. MILL BOARD TO JSS-9310-01:2014:REV-3 DC NO.5290 ME DT.16.12.14 & PARAFFIN WAX AMMN. TO JSS:9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.
Testing / Inspection Facility
LEAD RING
Description
DRG. NO.b III 8.249.034 DC NO.36310-A, DT-14.07.97.
Specification
DRG. NO.b III 8.249.034 DC NO.36310-A, DT-14.07.97.
Testing / Inspection Facility
DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5
Description
PART NO.ISV-483 GA. DC-35983-A DT.29.07.95 MATERIAL MILL BOARD TO SPEC JSS- 9310-01-2014 REV-3 DC-5290-ME DT-16.12.14.
Specification
PART NO.ISV-483 GA. DC-35983-A DT.29.07.95 MATERIAL MILL BOARD TO SPEC JSS- 9310-01-2014 REV-3 DC-5290-ME DT-16.12.14.
Testing / Inspection Facility
PAD FELT(D-45+/-1MM, T-6.4+/-0.65MM
Description
DRG.NO.155-1080,DC NO.36792-A, DT.01.11.2001
Specification
DRG.NO.155-1080,DC NO.36792-A, DT.01.11.2001
Testing / Inspection Facility
DISC DETAIL 47
Description
DRG.NO.3-026944/53-B-025Y FOR FUZE B429E.
Specification
DRG.NO.3-026944/53-B-025Y FOR FUZE B429E.
Testing / Inspection Facility
PARTITION
Description
PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20.
Specification
PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20.
Testing / Inspection Facility
PIECE PACKING SIDE
Description
PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20.
Specification
PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20.
Testing / Inspection Facility
FELT JUTE, SIZE=200 x 200 x 5 to 6.3(MM) SOFT QUALITY
Description
IND/ME/ 889(PROV), DC NO.3176-ME, DT.12/08/94.
Specification
IND/ME/ 889(PROV), DC NO.3176-ME, DT.12/08/94.
Testing / Inspection Facility
