MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

59921

ADV_956_142

Ordnance Factory Dehu Road

The Cheif General Manager
Dehu Road
Dehu Road
Maharashtra
412101

Name	Code	Quantity	Approx Value	Select
BOTTOM PLATE WITH SWIVEL FOR 84MM ILLG. Description SPECN. F 1301-903400 CLAUSE-3 & 6 DRG. NO. F-1301-054860 F DC(I) 34754 A Specification SPECN. F 1301-903400 CLAUSE-3 & 6 DRG. NO. F-1301-054860 F DC(I) 34754 A Drawing no. Manufacturing Technology Testing / Inspection Facility

59922

ADV_294_119

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
BEARINGS Description FAG BEARINGS Specification FAG BEARINGS Drawing no. Manufacturing Technology Testing / Inspection Facility

59923

ADV_106_102

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
STEEL MILD RODS OR ROUNDS OR WIRES OR FLATS VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FOAM VARIOUS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

59924

ADV_658_135

Engine Factory Avadi

Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
Large Valve Spring Description 20-06-65 Specification 20-06-65 Drawing no. Manufacturing Technology Testing / Inspection Facility
Valve Spring Smaller Description 306-66-2A Specification 306-66-2A Drawing no. Manufacturing Technology Testing / Inspection Facility
Larger Valve Spring Description 306-65-2A Specification 306-65-2A Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Valve Intake with Disc Lock Description CQA(HV) 506-602E Specification CQA(HV) 506-602E Drawing no. Manufacturing Technology Testing / Inspection Facility
Inlet Valve with Disc Lock Description SB 306-06-12 & 306-48-7 Specification SB 306-06-12 & 306-48-7 Drawing no. Manufacturing Technology Testing / Inspection Facility
Exhaust Valve with Disc Lock Description SB 306-07-12 & 306-48-7 Specification SB 306-07-12 & 306-48-7 Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Valve Exhaust with Disc Lock Description CQA(HV) 506-601E Specification CQA(HV) 506-601E Drawing no. Manufacturing Technology Testing / Inspection Facility
Assy. Valve Intake with Disc Lock Description CQA(HV) 506-600E Specification CQA(HV) 506-600E Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD GRADE II TYPE BB,WWR GRADE 5 PLY 9MM THICK 240 X 120 CMS Description IS: 303 & SUPP. SCHEDULE CIGS/SS/37(C) Specification IS: 303 & SUPP. SCHEDULE CIGS/SS/37(C) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD GRADE I TYPE AB,WWR GRADE 7 PLY 13MM THICK X 240 X 120 CM Description IS: 303 & SUPP.SCHEDULE NO CIGS/SS/37(C) Specification IS: 303 & SUPP.SCHEDULE NO CIGS/SS/37(C) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD GR. I TYPE AB WWR GRADE 3 PLY 5MM THICK X 210 X 120CM Description IS: 303 & SUUP SCHEDULE CIGS/SS/37(C) Specification IS: 303 & SUUP SCHEDULE CIGS/SS/37(C) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD GR. II TYPE BB, WWR GRADE 7 PLY 13 MM THICK SIZE 240CMS X 120 CMS Description IS: 303-1975 Specification IS: 303-1975 Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD COMMON GRADE I OR II 3 PLY 5MM THICK TYPE ABWWR GRADE SIZE 120CM X120 CMS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 7 OR 9 PLY 16 MM THICK 180 CMS X 120CMS MOISTURE PROOF CLASS-I(PHENOLIC RESIN BONDED FOR GEN Description IS: 303-1975 AMEND. NO. 1&2, SUPP. SCH.CIGS/SS/37(c) BWR GR.AB TYPE Specification IS: 303-1975 AMEND. NO. 1&2, SUPP. SCH.CIGS/SS/37(c) BWR GR.AB TYPE Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 6.00MM THICK (5 PLY) X120 CM X 240 CM. GRADE-WWR-TYPE-AA Description IS: 303-1989 (WITH AMDT-1 ) Specification IS: 303-1989 (WITH AMDT-1 ) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 25.00MM THICK (14PLY)X120CMX 240CM GRADE-MR-TYPE-AA Description IS: 303-1989 (WITH AMDT-1 ) Specification IS: 303-1989 (WITH AMDT-1 ) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 22.00 MMTHICK(11 PLY)X120CMX240 CM. GRADE-WWR-TYPE-AA Description IS: 303-1989 (WITH AMDT-1 ) Specification IS: 303-1989 (WITH AMDT-1 ) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 19.00 MM THICK(11PLY)X120 CM X 240CM. GRADE-MR-TYPE-AA Description IS: 303-1989 (WITH AMDT-1 ) Specification IS: 303-1989 (WITH AMDT-1 ) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 15.00 MM THICK(10 PLY)X 120 CMX 240 CM. GRADE-WWR-TYPE-AA Description IS: 303-1989 (WITH AMDT-1 ) Specification IS: 303-1989 (WITH AMDT-1 ) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD 12. MM THICK (7 PLY)X120 CM X240 CM. GRADE-MR-TYPE AA Description IS: 303-1989 (WITH AMdt -1) Specification IS: 303-1989 (WITH AMdt -1) Drawing no. Manufacturing Technology Testing / Inspection Facility
PLYWOOD H SHAPE SIZE 520MM LENGTH X 400 MM WIDTH X 6MM THICK Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
PLY WOOD 9PLY/12MM THICK SIZE.210X150 CM TO GRADE WWR-TYPE AA Description IS: 303-latest Specification IS: 303-latest Drawing no. Manufacturing Technology Testing / Inspection Facility

59925

ADV_44_113

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity	Approx Value	Select
CATCH LOCK ASSY Description CATCH LOCK ASSY AS PER DRG.NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 4 COMPONENTS (ONE EACH) 1 CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP Specification CATCH LOCK ASSY AS PER DRG.NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 4 COMPONENTS (ONE EACH) 1 CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP Drawing no. Manufacturing Technology Testing / Inspection Facility
VALVE FOR HEAT-551 Description DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 Specification DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 Drawing no. Manufacturing Technology Testing / Inspection Facility
CARBON NOZZLE BLANK FOR HEAT-551 Description DRG. NO. 6413206/DRG.NO. TRD-1-2-2242 Specification DRG. NO. 6413206/DRG.NO. TRD-1-2-2242 Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF BOOSTER CUP & PIN FOR HEAT-551 Description BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 Specification BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 Drawing no. Manufacturing Technology Testing / Inspection Facility

59926

ADV_880_101

Ammunition Factory Khadki

The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003

Name	Code	Quantity	Approx Value	Select
INTERMEDIATE CASING TO CQA (A) SEALED DRG. NO. 04-749-130222-02.1E Description CQA (A) DRG. NO. 04-749-130222-02.1E Specification CQA (A) DRG. NO. 04-749-130222-02.1E Drawing no. Manufacturing Technology Testing / Inspection Facility
ROUND 40 MM DRILL ( PRACTICE ) DRG. NO. AFK/SK-694-11 DT. 25.03.2011 Description DRG. NO. AFK/SK-694-11 Specification DRG. NO. AFK/SK-694-11 Drawing no. Manufacturing Technology Testing / Inspection Facility
CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 DT.4-7-98 Description DGOF 135 Specification DGOF 135 Drawing no. Manufacturing Technology Testing / Inspection Facility
PLASTIC BOX FOR PACKING OF CARTGS. SA 0.22 RF BALL TO DRG. NO. AFK/SK 586-09 SHT. 1 DT. 16.05.2009 Description DRG. NO. AFK/SK 586-09 SHT. 1 Specification DRG. NO. AFK/SK 586-09 SHT. 1 Drawing no. Manufacturing Technology Testing / Inspection Facility
NYLON RING DESIGN REF. CIA/AMN/1579 PART NO. ITV-50 Description DRG. NO. CIA/AMN/1579 PART NO. ITV-50 Specification DRG. NO. CIA/AMN/1579 PART NO. ITV-50 Drawing no. Manufacturing Technology Testing / Inspection Facility
PLASTIC INDEX DISC-SHOT NO.1 FOR CARTG. SA 12 BORE IN YELLOW COLOUR AS PER DRG.NO. AFK/SK-2888 Description DRG.NO. AFK/SK-2888 Specification DRG.NO. AFK/SK-2888 Drawing no. Manufacturing Technology Testing / Inspection Facility
DOSUTI SCOURED BLEACHED 91CM WIDE, Sl. NO IV OF TABLE 1 SPECN. IS 179-1977 Description IS 179-1977 Specification IS 179-1977 Drawing no. Manufacturing Technology Testing / Inspection Facility
TAPE COTTON MEDIUM PROOFED 6.0 mm Ã‚Â± 1.5 mm WIDE TO SPECN IND/ME/888(PROV) Description IND/ME/888(PROV) Specification IND/ME/888(PROV) Drawing no. Manufacturing Technology Testing / Inspection Facility
NC LAQUER THINNER FOR APC 210 MIXED OF AMYL ACETATE, ACETONE,TOLUENE, SPIRIT. PROPORTION 4:2.5:2.5:1 Description IS:231, IS:170 , IS : 537, JSS : 6810-98 RESPECTIVELY Specification IS:231, IS:170 , IS : 537, JSS : 6810-98 RESPECTIVELY Drawing no. Manufacturing Technology Testing / Inspection Facility
SOLVENT MIXTURE (THINNER) 4:4:2 (ACETONE IS:170, AMYL ACETATE IS:231, TOLUENE IS:537 RESPECTIVELY) Description AS PER IS SPECN. Specification AS PER IS SPECN. Drawing no. Manufacturing Technology Testing / Inspection Facility
READY MIXED PAINT, AIR DRYING SEMI GLOSSY FINISH FOR GENERAL PURPOSES Description SHADE NO.359 (MIDDLE BUFF) OF IS:5-1994(FOURTH REVISION) WITH AMENDMENT NO.1 SPECN NO.168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. 81MM BOMB BODY/BOAT TAIL UNIT. Specification SHADE NO.359 (MIDDLE BUFF) OF IS:5-1994(FOURTH REVISION) WITH AMENDMENT NO.1 SPECN NO.168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. 81MM BOMB BODY/BOAT TAIL UNIT. Drawing no. Manufacturing Technology Testing / Inspection Facility
PAINT RM AIR DRYING MATT FINISH OLIVE GREEN. ISC :220 OF IS:5-1994 AMN.NO.1 SPECN: IS: 168-1993 Description IS: 168-1993 Specification IS: 168-1993 Drawing no. Manufacturing Technology Testing / Inspection Facility
LACQUER : CLEAR NITRO CELLULOSE (APC NO 217) D S CAT NO. 8010-000313 TO SPECN. JSS 8010-42:2009 Description JSS 8010-42:2009 Specification JSS 8010-42:2009 Drawing no. Manufacturing Technology Testing / Inspection Facility
CRATE RGB-12, IN, MK-2 (PRACTICE) AS PER DRG. NO. NAI (B)-4005 Description DRG. NO. NAI (B)-4005 Specification DRG. NO. NAI (B)-4005 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX WOOD NO. S-5 MK-1 (IN) AS PER DRG. NO. ARDE-2055 SHT NO. 03 Description DRG. NO. ARDE-2055 SHT NO. 03 Specification DRG. NO. ARDE-2055 SHT NO. 03 Drawing no. Manufacturing Technology Testing / Inspection Facility
RIB ASSY Description DRG. NO. 175-45-019CD Specification DRG. NO. 175-45-019CD Drawing no. Manufacturing Technology Testing / Inspection Facility
FORGING FOR COVER OF SUCTION PUMP Description DRG. NO. 172-46-008-3. Specification DRG. NO. 172-46-008-3. Drawing no. Manufacturing Technology Testing / Inspection Facility
DESIGN, DEVELOPMENT SUPPLY AND PROVING OF FIXTURE FOR IGBCASING Description DRG. NO. F-175-45-001CD-BLT-1. Specification DRG. NO. F-175-45-001CD-BLT-1. Drawing no. Manufacturing Technology Testing / Inspection Facility
DESIGN, DEVELOPMENT SUPPLY AND PROVING OF FIXTURE FOR IGBCASING Description DRG. NO. F-175-45-001CD-BLT-1. Specification DRG. NO. F-175-45-001CD-BLT-1. Drawing no. Manufacturing Technology Testing / Inspection Facility
PLASTICS MOLDING COMPONENTS Description AS PER DRAWING/SPECIFICATION/REQUIREMENTS Specification AS PER DRAWING/SPECIFICATION/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
INJECTION MOULD Description AS PER DRAWING/SPECIFICATION/REQUIREMENTS Specification AS PER DRAWING/SPECIFICATION/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
MANUFACTURING OF JIGS AND FIXTURES Description AS PER DRAWING/SPECIFICATION/REQUIREMENTS Specification AS PER DRAWING/SPECIFICATION/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
PRECISION MACHINING COMPONENTS Description AS PER DRAWING/SPECIFICATION/REQUIREMENTS Specification AS PER DRAWING/SPECIFICATION/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
DRIVING GEAR (FORGING DRG) Description DRG. NO. 175.45.004/F Specification DRG. NO. 175.45.004/F Drawing no. Manufacturing Technology Testing / Inspection Facility
MENTLE FOR HEAT-551 Description DRG.NO. TRD-2-2-2271 Specification DRG.NO. TRD-2-2-2271 Drawing no. Manufacturing Technology Testing / Inspection Facility
DIAPHRAGM FOR HEAT-551 Description DRG.NO. TRD-2-2-2244 Specification DRG.NO. TRD-2-2-2244 Drawing no. Manufacturing Technology Testing / Inspection Facility
SELF CENTERING RING NUT FOR FUZE FB-40 Description DRG. NO. 36900100 Specification DRG. NO. 36900100 Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF BRAKE ACTUATOR(RH & LH) FOR PROJECT DHANUSH. Description AS PER SPECIFICATION/DRAWING/REQUIREMENTS Specification AS PER SPECIFICATION/DRAWING/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF WHEEL BRAKE (RH & LH) FOR PROJECT DHANUSH. Description AS PER SPECIFICATION/DRAWING/REQUIREMENTS Specification AS PER SPECIFICATION/DRAWING/REQUIREMENTS Drawing no. Manufacturing Technology Testing / Inspection Facility
COVER FOR IGNITER ASSY Description COVER TO DRG.NO. 6429713 ART NO. 1 EDITION 2 DC 37056-A DT. 23/05/06 Specification COVER TO DRG.NO. 6429713 ART NO. 1 EDITION 2 DC 37056-A DT. 23/05/06 Drawing no. Manufacturing Technology Testing / Inspection Facility
CARBON NOZZLE BLANK FOR HEAT-551 Description DRG. NO. 6413206/DRG.NO. TRD-1-2-2242 Specification DRG. NO. 6413206/DRG.NO. TRD-1-2-2242 Drawing no. Manufacturing Technology Testing / Inspection Facility
ADOPTER BUSH FOR 81 MM SMOKE GRENADE Description ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 Specification ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 Drawing no. Manufacturing Technology Testing / Inspection Facility
VALVE FOR HEAT-551 Description DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 Specification DRG.NO. 5209565/DRG.NO. TRD-2-2-2247 Drawing no. Manufacturing Technology Testing / Inspection Facility
MENTLE FOR HEAT-551 Description DRG.NO. TRD-2-2-2271 Specification DRG.NO. TRD-2-2-2271 Drawing no. Manufacturing Technology Testing / Inspection Facility
AFT CLOSURE INSULATOR FOR 84 MM HEAT-551 Description DRG.NO. TRD-2-2-2243 Specification DRG.NO. TRD-2-2-2243 Drawing no. Manufacturing Technology Testing / Inspection Facility
SET OF BOOSTER CUP & PIN FOR HEAT-551 Description BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 Specification BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 Drawing no. Manufacturing Technology Testing / Inspection Facility
ELECTROMAGNET EM46-000SB Description DRG.NO.EM 46.000 SB SPCN.EM-46-000 TU. Specification DRG.NO.EM 46.000 SB SPCN.EM-46-000 TU. Drawing no. Manufacturing Technology Testing / Inspection Facility
AFT CLOSURE INSULATOR FOR 84 MM HEAT-551 Description DRG.NO. TRD-2-2-2243 Specification DRG.NO. TRD-2-2-2243 Drawing no. Manufacturing Technology Testing / Inspection Facility
DESIGN, DEVELOPMENT SUPPLY AND PROVING OF FIXTURE FOR IGBCASING Description DRAWING NO F-175-45-001CD-BLT-1 Specification DRAWING NO F-175-45-001CD-BLT-1 Drawing no. Manufacturing Technology Testing / Inspection Facility
BARREL ASSY. (03 TYPES) Description FOR KAVACH MOD-II Specification FOR KAVACH MOD-II Drawing no. Manufacturing Technology Testing / Inspection Facility
INTERMEDIATE GEAR SPINDLE (FORGING DRG.) Description DRG. NO. 172-45-033/F Specification DRG. NO. 172-45-033/F Drawing no. Manufacturing Technology Testing / Inspection Facility

59927

ADV_568_105

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
SEAR FOR 0.32 PISTOL. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
HOUSING LEVER SEAR FOR 0.32 PISTOL. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING MAGAZINE FOR 0.32 PISTOL. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
TRIGGER FOR 0.315 SPORTING RIFLE. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
CATCH MAGAZINE (FINISH COMPONENT) FOR 0.22 SPORTING RIFLE. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
SAFETY SEAR FOR 0.22 SPORTING RIFLE. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
LEVER SEAR FOR 0.32 PISTOL. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
SEAR FOR 0.32 PISTOL. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility

Proceed