MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

68961

ADV_568_105

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
EXTRACTOR (LEFT) FOR 12 BORE MOD. PAG. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
EXTRACTOR (RIGHT) FOR 12 BORE MOD. PAG. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
FRAME FOR .22 REVOLVER Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility

68962

ADV_619_128

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
TRANSIT CASE FOR 40MM MGL Description TO DRG. NO. TEND 1937 Specification TO DRG. NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG.NO. TEND 1937 Specification TO DRG.NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG. NO. TEND 1937 Specification TO DRG. NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRIGGER LOCKING BRACKET FOR 12 BORE MOD. PAG. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
BARREL EXTENSION (WITH RFI MATL.) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
FINISH COMPONENT BLOCK REAR FOR 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
CUP FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SLIDE (RETRACTING) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
REGULATOR GAS FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG. NO. TEND 1937 Specification TO DRG. NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
FINISH COMPONENT OF STOPPER FRONT FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
BLOCK FIXING PISTOL GRIP FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG. NO. TEND 1937 Specification TO DRG. NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility

68963

ADV_658_135

Engine Factory Avadi

Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
Assembly of Centrifugal Oil Cleaner Description To drg. No. SB 447-00-1 Specification To drg. No. SB 447-00-1 Drawing no. Manufacturing Technology Testing / Inspection Facility
Oil Filter Description To drg. No. SB 413-00-15 Specification To drg. No. SB 413-00-15 Drawing no. Manufacturing Technology Testing / Inspection Facility
Starting Valve Description To drg. No. SB 322-13-4 Specification To drg. No. SB 322-13-4 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG.NO.TEND 1937 Specification TO DRG.NO.TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG. NO. TEND 1937 Specification TO DRG. NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
TRANSIT CASE FOR 40MM MGL Description TO DRG NO. TEND 1937 Specification TO DRG NO. TEND 1937 Drawing no. Manufacturing Technology Testing / Inspection Facility
LOOP LANYARD ASSY. FOR PISTOL AUTO 9MM 1A. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
LANYARD FOR PISTOL AUTO 9MM 1A. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL TORSION FOR HAMMER FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL COMPRESSION FOR PLUNGER WHEEL LOCK FOR RIFLE 5.56MM INSAS. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL TORSION FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL COMPESSION (H.O.D.) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL COMPERSSION EXTRACTOR (INNER) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING PLATFORM FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
FINISH COMPONENT OF SPRING HELICAL COMPRESSION FOR LOCK RETAINER PLUNGER GAS REGULATOR FOR RIFLE 5.5 Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL TORSION CATCH MAGAZINE FOR RIFLE 5.56MM INSAS Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
FINISH COMPONENT OF SCREW SPECIAL FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
FORE SIGHT ASSY. (WITH HEAT TREATMENT & PROTECTIVE FINISH) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
RING RETAINER FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SCREW SHOULDER FOR LOCK RETAINER FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
PLUNGER MULTI APPLICATION (WHEEL LOCK) FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SCREW SHOULDER FRONT SLING LOOP FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
WASHER FLAT GRENADE SIGHT FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
BRACKET SLING FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
PIN GROOVED HEADED FOR HAMMER FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
SPACER STEPPED FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility
WHEEL LOCK FOR RIFLE 5.56MM INSAS. Description AS PER DRAWIING Specification AS PER DRAWIING Drawing no. Manufacturing Technology Testing / Inspection Facility

68964

ADV_106_102

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
PIECES OF 2.65 M X 0.27 M OF DUCK COTTON 475 GRAM. O.G. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
LONG CLOTH YELLOW 91 CM WIDE Description IS: 187-1987 (V.NO.01) Specification IS: 187-1987 (V.NO.01) Drawing no. Manufacturing Technology Testing / Inspection Facility
LONG CLOTH RED 91 CM WIDE Description IS: 187-1987 (V.NO.01) Specification IS: 187-1987 (V.NO.01) Drawing no. Manufacturing Technology Testing / Inspection Facility
LONG CLOTH COTTON WHITE BLEACHED 91 CMS Description IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 Specification IS: 187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 Drawing no. Manufacturing Technology Testing / Inspection Facility
LONG CLOTH COTTON KHAKI 91 CM Description IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE Specification IS: 187-1987 (V. NO.1) EXCEPT THAT (1) IN APPEARANCE SHADE Drawing no. Manufacturing Technology Testing / Inspection Facility
LINING CLOTH POLYSTER WHITE 100% 110 CMS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
LINING CLOTH POLYSTER 100% BLACK 110 CMS. WIDE Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS. Description PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) Specification PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON WHITE KNITTED 92 CMS. Description IND/NAVY/TC/4273 ANNEX. A Specification IND/NAVY/TC/4273 ANNEX. A Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CMS. Description IS: 2422. VERIETY NO. 4 Specification IS: 2422. VERIETY NO. 4 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON OG WATER REPELLENT FOR CAPES WATER PROOF 76 CMS. Description IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 Specification IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON O.G.WATER REPELLENT FOR CAPE WATER PROOF, 135 CMS. WIDE Description IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 Specification IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON O.G.W.R. FOR CAPS WP 91 C MS. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF, 135 CMS. WIDE Description IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST,1995 V.NO.1 Specification IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST,1995 V.NO.1 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPES WATER PROOF 76 CMS. Description IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 Specification IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST, 1995 VR.NO.1 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON CLOSELY WOVEN 237 GRMS. BLACK 91 CMS WIDE Description JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK Specification JSS: 8305-5 EXCEPT WL. SHADE WHICH SHALL BE BLACK Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON CLOSELY WOVEN 235 GRMS BLACK 91 CM WIDE, VAT DYED Description JSS: 8305-5 (APRIL, 80) EXCEPT THAT SHADE WHICH WILL BE BLACK Specification JSS: 8305-5 (APRIL, 80) EXCEPT THAT SHADE WHICH WILL BE BLACK Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON CLOSELY WOVEN 235 GR. BLACK WR 91 CMS. Description JSS: 8305-5 Specification JSS: 8305-5 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON 50 GM OG 100 CMS. WIDE Description DMSRDE/T&GS/97/415/TEX-4/3(b) Specification DMSRDE/T&GS/97/415/TEX-4/3(b) Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC COTTON 125 GSM SKY BLUE 155 CMS. WIDE Description AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 Specification AS PER TABLE-2 OF SPECN.NO. AIR HQ/JDQAS/OK-004 Drawing no. Manufacturing Technology Testing / Inspection Facility
FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS. Description PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) Specification PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) Drawing no. Manufacturing Technology Testing / Inspection Facility
DUCK POLYESTER/COTTON BLENDED, RIP STOP (MADE FROM-RING SPUN YARN) OGWP ROT PROOF, VARIETY NO.1, MAS Description IS: 13510-2000 RING SPUN YARN (V.NO. 1) MASS Specification IS: 13510-2000 RING SPUN YARN (V.NO. 1) MASS Drawing no. Manufacturing Technology Testing / Inspection Facility
DUCK POLYESTER/COTTON BLENDED, RIP STOP (MADE FROM - RING SPUN YARN ) OGWP ROT PROOF, VARIETY NO.1, Description IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS Specification IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS Drawing no. Manufacturing Technology Testing / Inspection Facility
DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP 91 CMS. WIDE VARIETY NO. 1 VAT DISPRESE DYED Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
DUCK COTTON 610 GMS O.G. W.P. 91 CMS. Description IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 Specification IS: 1422-1983 (V.NO.2), REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2 Drawing no. Manufacturing Technology Testing / Inspection Facility
DUCK COTTON 476 GMS. SULPHAR KHAKI 91 CMS. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
DRILL COTTON WHITE BLEACHED 91 CMS. Description IS: 177-1977 Specification IS: 177-1977 Drawing no. Manufacturing Technology Testing / Inspection Facility
COTTON DOSUTI WHITE BLEACHED 91 CMS. Description IS: 179-1977 VARIETY NO. 4 Specification IS: 179-1977 VARIETY NO. 4 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH COTTON DOSUTIE SCOURED 91 CMS. Description IS: 179-1977 VARIETY NO. 4 Specification IS: 179-1977 VARIETY NO. 4 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CM Description OEFC/01/PCK/ 2003 Specification OEFC/01/PCK/ 2003 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH DUCK RIP STOP COTTON 610 GRM O.G. W.P. 91 CMS. WIDE Description IND/TC/0145 Specification IND/TC/0145 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS. WIDE Description IND/TC/0145 Specification IND/TC/0145 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLOTH DUCK POLYSTER/COTTON RIP STOP FABRIC (HEAVY) O.G. 91 CMS. Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

Proceed