AS PER AHSP/CQA(A) SPECNS. & DRGS.

AS PER AHSP/CQA(A) SPECNS. & DRGS.

AS PER AHSP/CQA(A) SPECNS. & DRGS.

AS PER AHSP/CQA(A) SPECNS. & DRGS.

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA.DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT.STD.C2 RS S2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT.STD.BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM.1A.)

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA.DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT.STD.C2 RS S2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT.STD.BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM.1A.)

LEVER TRIPPING TO DS CATNO.5340-16094 (LT.DC-25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD.C2RSS2FOR PLATE-1 AND NIL FOR PLATE-II) (NMIR TEST AS PER IS :4163-82 & INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A

LEVER TRIPPING TO DS CATNO.5340-16094 (LT.DC-25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD.C2RSS2FOR PLATE-1 AND NIL FOR PLATE-II) (NMIR TEST AS PER IS :4163-82 & INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A

PIN FIRING TO RFI SK.NO.4746 [DS CAT. 1005-003204 (DC-23693-SA) (NMIR TEST AS PER IS :4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D) FOR PISTOL AUTO 9MM 1A

PIN FIRING TO RFI SK.NO.4746 [DS CAT. 1005-003204 (DC-23693-SA) (NMIR TEST AS PER IS :4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D) FOR PISTOL AUTO 9MM 1A

SPRING LINK TO DS CAT NO.5360-007086 ( LATEST DC-24639-SA DATED-22.2.2000 ) FOR PISTOL AUTO 9 MM 1A.

SPRING LINK TO DS CAT NO.5360-007086 ( LATEST DC-24639-SA DATED-22.2.2000 ) FOR PISTOL AUTO 9 MM 1A.

HAMMER TO DS.CAT.NO.1005-008003(LATEST DC-25923-SA DT.22/04/04) FOR RIFLE 5.56MM INSAS.

HAMMER TO DS.CAT.NO.1005-008003(LATEST DC-25923-SA DT.22/04/04) FOR RIFLE 5.56MM INSAS.

Drg .No. OFBA/CX/51dtd24.09.89

Drg .No. OFBA/CX/51dtd24.09.89

Drg. No.OFBA/NCP/209 DTD. 25.11.68

Drg. No.OFBA/NCP/209 DTD. 25.11.68

Drg.No.13979-0-0 DC 35707 A DTD. 05.05.94 and SPEC NO. IA 1169(n)

Drg.No.13979-0-0 DC 35707 A DTD. 05.05.94 and SPEC NO. IA 1169(n)

Drg. No. OFBA/PETN/23

Drg. No. OFBA/PETN/23

HAMMER TO DS.CAT.NO.1005-008003(LATEST DC-25923-SA DT.22/04/04) FOR RIFLE 5.56MM INSAS.

HAMMER TO DS.CAT.NO.1005-008003(LATEST DC-25923-SA DT.22/04/04) FOR RIFLE 5.56MM INSAS.

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315009190 (LATEST DC-24006-SA DT.29/12/97) FOR RIFLE 5.56MM INSAS

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315009190 (LATEST DC-24006-SA DT.29/12/97) FOR RIFLE 5.56MM INSAS

FINISHED COMPONENT PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO D.S.CAT NO.5315-009186 (LATEST DC-23891-SA DT.18-08-1997) FOR RIFLE 5.56 MM INSAS.

FINISHED COMPONENT PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO D.S.CAT NO.5315-009186 (LATEST DC-23891-SA DT.18-08-1997) FOR RIFLE 5.56 MM INSAS.

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18/09/1997) FOR RIFLE 5.56MM INSAS.

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18/09/1997) FOR RIFLE 5.56MM INSAS.

FINISH COMPONENT OF STOPPER FRONT TO D.S.CAT NO.1005-007782(LATEST DC-24129-SA DT.23/6/98) FOR RIFLE 5.56MM INSAS

FINISH COMPONENT OF STOPPER FRONT TO D.S.CAT NO.1005-007782(LATEST DC-24129-SA DT.23/6/98) FOR RIFLE 5.56MM INSAS

STUD COCKING TO DS CAT NO 5307-004421(LATEST DC-23897-SA DT 27/8/97) FOR RIFLE 5.56MM INSAS

STUD COCKING TO DS CAT NO 5307-004421(LATEST DC-23897-SA DT 27/8/97) FOR RIFLE 5.56MM INSAS

FINISHED COMPONENT OF BLOCK TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT 13/01/2003) FOR RIFLE 5.56MM INSAS

FINISHED COMPONENT OF BLOCK TO DS CAT NO.1005-560061 (LATEST DC-25657-SA DT 13/01/2003) FOR RIFLE 5.56MM INSAS

AS PER REQUIREMENT

AS PER REQUIREMENT

MULTI PURPOSE SLINGING DEVICE (CHPU-B SB) TO DRG NO. CQA(HV)5.95.007

MULTI PURPOSE SLINGING DEVICE (CHPU-B SB) / CQA(HV)5.95.007

CQA(HV)5.95.007

• ATTACHED

• ATTACHED

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER AHSP/CQA(A) SPECNS & DRGS

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

DRG.NO. TRD-1-22246

DRG.NO. TRD-1-22246

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

AS PER DRAWING

As per drawing

As per drawing

As per drawing

As per drawing

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315009190 (LATEST DC-24006-SA DT.29/12/97) FOR RIFLE 5.56MM INSAS

PIN GROOVED HEADED FOR HAMMER TO DS CAT NO.5315009190 (LATEST DC-24006-SA DT.29/12/97) FOR RIFLE 5.56MM INSAS

PIN GROOVED HEADED FOR HINGE COVER TO DS CAT NO 5315-009188(LATEST DC-24744-SA DT 12.06.2000 FOR RIFLE 5.56MM INSAS

PIN GROOVED HEADED FOR HINGE COVER TO DS CAT NO 5315-009188(LATEST DC-24744-SA DT 12.06.2000 FOR RIFLE 5.56MM INSAS

FINISHED COMPONENT PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO D.S.CAT NO.5315-009186 (LATEST DC-23891-SA DT.18-08-1997) FOR RIFLE 5.56 MM INSAS.

FINISHED COMPONENT PIN GROOVED HEADED FOR TRIGGER & SAFETY SEAR TO D.S.CAT NO.5315-009186 (LATEST DC-23891-SA DT.18-08-1997) FOR RIFLE 5.56 MM INSAS.

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18/09/1997) FOR RIFLE 5.56MM INSAS.

SPACER STEPPED TO DS CAT NO.5365-010491(LATEST DC-23918-SA DT.18/09/1997) FOR RIFLE 5.56MM INSAS.

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per specification

As per specification

As per specification

As per specification

As per specification

As per specification

As per specification

As per specification

As per specification

As per specification

As per drawing

As per drawing

As per specification

As per specification

As per specification

As per specification

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per specification

As per specification

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

As per drawing

BLADE FORE SIGHT TO DS CAT NO.1005-003197 TO 1005-003201,1005-006582 & 1005-006583 (LATEST DC-22727-SA DT.21-11-94) FOR PISTOL AUTO 9MM 1A.

BLADE FORE SIGHT TO DS CAT NO.1005-003197 TO 1005-003201,1005-006582 & 1005-006583 (LATEST DC-22727-SA DT.21-11-94) FOR PISTOL AUTO 9MM 1A.

CATCH MAGAZINE TO DS CAT NO 1005-003148(LT.DC-26043-SA DT.14-3-05) FOR PISTOL AUTO 9MM 1A.

CATCH MAGAZINE TO DS CAT NO 1005-003148(LT.DC-26043-SA DT.14-3-05) FOR PISTOL AUTO 9MM 1A.

GUIDE SPRING MAIN ASSY.TO DS CAT NO.5360-007390 (LT.DC-25139-SA DT.08-10-2001) CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186 (DC-24858-SA), 2)PLUG GUIDE-1005-003187 (DC-24858-SA), 3)SPRING LEVER LOCKING 1005-003188 (DC-24868-SA) & CHROMIUM ALLOY STEEL BALL 3.96MM DIA. FOR PISTOL AUTO 9MM.1A

GUIDE SPRING MAIN ASSY.TO DS CAT NO.5360-007390 (LT.DC-25139-SA DT.08-10-2001) CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186 (DC-24858-SA), 2)PLUG GUIDE-1005-003187 (DC-24858-SA), 3)SPRING LEVER LOCKING 1005-003188 (DC-24868-SA) & CHROMIUM ALLOY STEEL BALL 3.96MM DIA. FOR PISTOL AUTO 9MM.1A

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA.DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT.STD.C2 RS S2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS:4163-82 WITH ACCEPT.STD.BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM.1A.)

LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA.DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT.STD.C2 RS S2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS:4163-82 WITH ACCEPT.STD.BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM.1A.)

LEVER TRIPPING TO DS CATNO.5340-16094 (LT.DC-25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD.C2RSS2FOR PLATE1 AND NIL FOR PLATE-II) (NMIR TEST AS PER IS:4163-82 & INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A

LEVER TRIPPING TO DS CATNO.5340-16094 (LT.DC-25056-SA-DT.02-7-2001) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPTANCE.STD.C2RSS2FOR PLATE1 AND NIL FOR PLATE-II) (NMIR TEST AS PER IS:4163-82 & INCLUSION CONTENT SHOULD NOT EXCEED A,B,C,D = 3 FOR THIN AND 1 FOR THICK) FOR PISTOL AUTO 9MM 1A

PIN FIRING TO RFI SK.NO.4746 [DS CAT. 1005-003204 (DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D) FOR PISTOL AUTO 9MM 1A

PIN FIRING TO RFI SK.NO.4746 [DS CAT. 1005-003204 (DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D) FOR PISTOL AUTO 9MM 1A

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

TRIGGER TO DS CAT NO.1005-003184 (LT.DC-25575-SA DT.06-11-02 FROM I/C TRIGGER TO DRG.RFI SK NO.3651*3 FOR PISTOL AUTO 9MM 1A.

UNIT BURST CONTROL TO DS CAT NO. 1005-007791 ( LT. DC-24660-SA DT. 13-3-2000 ) CONSIST OF DS-CAT NOS. 1) 1005-007831 2) 1005-007868 3) 1005-007808 4) 1005-007864 5) 5315-009328 6) 5360-007211 FOR RIFLE 5.56 MM INSAS.

UNIT BURST CONTROL TO DS CAT NO. 1005-007791 ( LT. DC-24660-SA DT. 13-3-2000 ) CONSIST OF DS-CAT NOS. 1) 1005-007831 2) 1005-007868 3) 1005-007808 4) 1005-007864 5) 5315-009328 6) 5360-007211 FOR RIFLE 5.56 MM INSAS.

BLOCK GAS FORGING AS PER RFI SK NO.4873*7-S FOR RIFLE 5.56MM.INSAS (WITH FIRMS MATL.)

BLOCK GAS FORGING AS PER RFI SK NO.4873*7-S FOR RIFLE 5.56MM.INSAS (WITH FIRMS MATL.)

FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL..

FORGING OF PISTON EXTENSION AS PER RFI SK NO. 6422*-S FOR RIFLE 5.56MM. INSAS WITH FIRMS MATL..

BODY (FORGING) TO RFI SK. NO. 7470 (LT. DC-04/011/04 DT.24-2-04) FOR .315INCH. SPORTING RIFLE.

BODY (FORGING) TO RFI SK. NO. 7470 (LT. DC-04/011/04 DT.24-2-04) FOR .315INCH. SPORTING RIFLE.

BOLT BREECH FORGING FOR .315INCH. SPORTING RIFLE DRG. NO. RFI SK.3455*2.

BOLT BREECH FORGING FOR .315INCH. SPORTING RIFLE DRG. NO. RFI SK.3455*2.

BLADE FORE SIGHT TO DS CAT NO.1005-003197 TO 1005-003201,1005-006582 & 1005-006583 (LATEST DC-22727-SA DT.21-11-94) FOR PISTOL AUTO 9MM 1A.

BLADE FORE SIGHT TO DS CAT NO.1005-003197 TO 1005-003201,1005-006582 & 1005-006583 (LATEST DC-22727-SA DT.21-11-94) FOR PISTOL AUTO 9MM 1A.