PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.
Specification
PIN FIRING TO RFI SK NO.4746 (DS CAT.1005-003204(DC-23693-SA) (NMIR TEST AS PER IS:4163-82 WITH ACCEPTANCE STD.BETTER THAN 3 THIN 1 THICK SERIES FOR A,B,C,D ) FOR PISTOL AUTO 9MM 1A.
LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)
Specification
LEVER SLIDE LOCKING TO DS CAT NO.1005-003189 (LT.DC-25341-SA DT.25-4-02) (MACRO ETCH TEST AS PER ASTME-381-84 WITH ACCEPT STD.C2RSS2 FOR PLATE-1 AND NIL FOR PLATE-II, NMIR TEST AS PER IS : 4163-82 WITH ACCEPT STD, BETTER THAN 3 THIN AND 1 THICK SERIES FOR A,B,C,D.(FOR PISTOL AUTO 9MM 1A)
BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.
Specification
BRACKET TO DS CAT NO.1005-007881(LT.DC-26013-SA,DT.30-11-04) FROM RFI SK NO.6756*3(I.C) WILL BE PROVIDED BY RFI.TP TO BE CONFIRM MECHANICAL PROPERTIES AT T CONDITION FOR RIFLE 5.56MM. INSAS.
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
Specification
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.
Specification
CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.
Drawing no.
DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.
CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.
14
Number
95605
ADV_381_116
Ordnance Factory Kanpur
The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.
Specification
ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.
