AXLE LF NO 7420111141

AXLE LF NO 7420111141

BL8300071

RING LF NO 7420111103

RING LF NO 7420111103

BL9140587

STUD LF NO 7420111144

STUD LF NO 7420111144

BL8927298

RING LF NO 7420111114

RING LF NO 7420111114

BL8241846

BUSH LF NO 7420111136

BUSH LF NO 7420111136

BL8227467

TOOTHED QUARDRANT LF NO 7420111018

TOOTHED QUARDRANT LF NO 7420111018

BL8483069

GUIDE LF NO 7440200860

GUIDE LF NO 7440200860

IUMK733121020-01

GUIDE LF NO 7440200859

GUIDE LF NO 7440200859

IUMK733121020

SPRING WASHER TO DRG NO AL8387003 (LF 9002081334)

SPRING WASHER TO DRG NO AL8387003 (LF 9002081334)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

MOUNT LF NO 7432412036

MOUNT LF NO 7432412036

AF8637118

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985

0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985

• AS PER TE DOCUMENTS

• AS PER TE DOCUMNTS

DOUBLE PRESSURE GAUGE TO DRG NO 6110390

DOUBLE PRESSURE GAUGE TO DRG NO 6110390

DRG NO 6110390

OIL PRESSURE GAUGE 0-40 KG/CM SQ. TO CAT/PT NO M2/BOF- 5051690

OIL PRESSURE GAUGE 0-40 KG/CM SQ. TO CAT/PT NO M2/BOF- 5051690

CAT/PT NO M2/BOF- 5051690

OIL PRESSURE GAUGE RANGE 0.25 KG/CM SQ TO DRG NO M2/BOF -5053552

OIL PRESSURE GAUGE RANGE 0.25 KG/CM SQ TO DRG NO M2/BOF -5053552

M2/BOF -5053552

CHAIN TO DRG NO. 4027314

CHAIN TO DRG NO. 4027314

DRG NO 4027314

LEVELING JACKS PLATE WELDING TO DRG NO. 4018798

LEVELING JACKS PLATE WELDING TO DRG NO. 4018798

DRG NO. 4018798

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 00 00 004 00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 00 00 004 00DA

0204 03 02 00 00 004 00DA

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Pistol Grip Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-02-19-31-000-00DG Consisting of INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

Pistol Grip Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-02-19-31-000-00DG Consisting of INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

0204-03-02-19-31-000-00DG

4 CORE MULTIMODE ARMOURED CABLE MAKE DLINK PART NO NCB FM620 AULS 04

4 CORE MULTIMODE ARMOURED CABLE MAKE DLINK PART NO NCB FM620 AULS 04

PART NO NCB FM620 AULS 04

PRISM BLANK(2644168561)

AS PER DRAWING NO.OLF/B/7160337/165

MOULD FOR PRISM BM 90 DEGREE (2612867271)

AS PER DRAWING NO.OLF/B/7201041/170

MOULD FOR PRISM AP-60 DEGREE(2612867261)

AS PER DRAWING NO OLF/B/7200080/171

GLASS MOULD FOR PRISM

GLASS MOULD FOR PRISM AS PER DRG NO. OLF/B/7.201.006/078 FOR BPK-2-42-DC. GLASS BK-110, RADIATION RESISTANT GLASS, REFRACTIVE INDEX NO=1.568891, ABBE VALUE NO.=56.05, DENSITY OF GLASS=3.12 GM/CC

BSH7201006/078

MOULD FOR PRISM

MOULD FOR PRISM, GLASS USE K-108 GOST 3514-76, ALL SPECIFICATION AS PER DRG. NO. OLF/B/7200189/141. (GLASS USE IN MOULD REFRACTIVE INDEX NO=1.516373, ABBE VALUE (VD)=64.07, DENSITY OF GLASS 2.52 GM/CC, RADIATION RESISTANT GLASS)

OLF/B/7200189/141

GLASS MOULD FOR PRISM

GLASS MOULD FOR PRISM, ALL CHARACTERISTICS AS PER DRAWING NO. OLF/B/7200068/084. GLASS K-108, REFRACTIVE INDEX=1.516373, ABBE VALUE(VD)=64.07. DENSITY OF GLASS=2.52 GM/CC

OLF/B/7200068/084

• OPTICAL COMPONENT

• OPTICAL COMPONENT

GLASS MOULD FOR MIRROR AS PER DRG. NO. OLF/B/7.230.073/079 FOR BPK-2-42

GLASS MOULD FOR MIRROR AS PER DRG. NO. OLF/B/7.230.073/079 FOR BPK-2-42

BSH7230073

HEAT TREATMENT (ANNEALING) OPERATION OF COMPONENT SPIRAL BLANK TO DRG. NO M-11248

AS PER DRAWING

HEAT TREATMENT (ANNEALING) OPERATION OF COMPONENT CLIP TO DRG NO. M-11249

AS PER DRAWING

NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM DIA

NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM DIA

BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.

BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.

DETENT SPRING FOR PT.NO.28 TO CQA(A)DRG.NO. 3-016919 DET-31DC-37284-A DT.6/7/2011.

DETENT SPRING FOR PT.NO.28 TO CQA(A)DRG.NO. 3-016919 DET-31DC-37284-A DT.6/7/2011.

COVER TO CQA AMMN DRG NO. 3-016919 DET-15 DC 37284-A DT 06.07.2011.

COVER TO CQA AMMN DRG NO. 3-016919 DET-15 DC 37284-A DT 06.07.2011.

3-016919

• As per DRG

• As per DRG

BRASS ROUND TO SPECN.BS EN 1652:1998 MATERIAL SYMBOL CUZN39PB2,CW612N CONDITION R420 HAVING STRAIGHT LENGTH 1.5 TO 2 MTSIZE:11.00 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

BRASS ROUND TO SPECN.BS EN 1652:1998 MATERIAL SYMBOL CUZN39PB2,CW612N CONDITION R420 HAVING STRAIGHT LENGTH 1.5 TO 2 MTSIZE:11.00 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

BRASS ROUNDS TO SPECN.BS EN 12164 MATERIAL SYMBOL CUZN35PB2COND.R440 HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE: 17.00+/-0.10 MM DIA.

BRASS ROUNDS TO SPECN.BS EN 12164 MATERIAL SYMBOL CUZN35PB2COND.R440 HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE: 17.00+/-0.10 MM DIA.

CARBON STEEL GROUND ROUND BARS TO SPECN. BS:970 PT.I(1983)GRADE 080M40 IN HOT ROLLED +COLD DRAWN CONDITION OR BS:970PT.I(1983) GRADE 212M36 IN "R"COND.IN STRAIGHT LENGTH OF 1.5TO 2 METERS TO SIZE 30.00 -0.052 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR

CARBON STEEL GROUND ROUND BARS TO SPECN. BS:970 PT.I(1983)GRADE 080M40 IN HOT ROLLED +COLD DRAWN CONDITION OR BS:970PT.I(1983) GRADE 212M36 IN "R"COND.IN STRAIGHT LENGTH OF 1.5TO 2 METERS TO SIZE 30.00 -0.052 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

ALLUMINIUM ALLOY ROUND BAR TO SPECN :BS 1474-1987 DESIGNATION 2014 A, CONDITION "TB",STRAIGHT LENGTH 2-3 MTR. OR IS:733-1983 (REAFFIRMED 2006),DESIGN 24345, CONDITION "W",STRAIGHT LENGTH 2-3 MTR. SIZE: DIA 5 MM, +0.025MM, -0.075MM, WITHOUT PERIPHERAL GRAIN GROWTH

ALLUMINIUM ALLOY ROUND BAR TO SPECN:BS 1474-1987 DESIGNATION 2014 A, CONDITION "TB",STRAIGHT LENGTH 2-3 MTR. OR IS:733-1983 (REAFFIRMED 2006),DESIGN 24345, CONDITION "W",STRAIGHT LENGTH 2-3 MTR. SIZE: DIA 5 MM, +0.025MM, -0.075MM, WITHOUT PERIPHERAL GRAIN GROWTH

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)

NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1739 B

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1739 B

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011 (6333490103)

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011

IQX-896 DC 37284-A DT. 06.07.2011

• As per Drg & spec.

• As per Drg & spec.

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011 (6333490104)

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011

IQX-895DC 37294-A DT. 16-12-2011

• As per Spec & Drawing

• As per Spec & Drawing

STEEL STRIP TO SPECN.BS1449.PT-I-1983 SECTION 2 GRADE CS-3 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:- 54 - 0.3 MM WIDE X 0.2 - 0.03 MM THICK.

STEEL STRIP TO SPECN.BS1449.PT-I-1983 SECTION 2 GRADE CS-3 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:- 54 - 0.3 MM WIDE X 0.2 - 0.03 MM THICK.

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 ITEM CODE 6333490102

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002

3-016919 DET -35

• AS PER DRG

• AS PER DRG

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

• As per DRG

• As per DRG

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

70FT2080201172S30456KNPF01058B

AS PER DRG.

65FT2080221162S30479KNPF01058B

Part No. 1165150

GEAR CUTTING LOWER RACE RING TO DRG NO AK-630M 119-1 OF AK-630 NAVAL GUN

GEAR CUTTING LOWER RACE RING TO DRG NO AK 630M 119 1 OF AK 630 NAVAL GUN

• AS PER ATTACHMENT

• AS PER ATTACHMENT

ENAMEL XB-124 PROTECTIVE-AMK 339 CKD ASSLY

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A1)

COMPOUND K-68-AMK 339 CKD ASSLY

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A5)

GLUE 51-K-10BM-AMK 339 CKD ASSLY,

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A4)

BENZINE-NEFRAS C50/170-AMK 339 CKD ASSLY

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A3)

PRIME AK 070 YELLOW-AMK 339 CKD ASSLY

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A2)

ENAMEL XB-124 GREY-AMK 339 CKD ASSLY,

AS PER ENCLOSED QUALITY CERTIFICATE FORMAT (ANNEXURE A1)

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

ALUMINUM ALLOY ROD DIA 26.5 +/-0.3MM, LENGTH - 1 M , GRADE 24345 'W' CONDITION (HE-15) TO SPECIFICATION IS: 733:1983

AS PER ENCLOSED MONITORING INSTRUCTION

• AS PER ENCLOSED MONITORING INSTRUCTION
• AS PER ENCLOSED MONITORING INSTRUCTION
• AS PER ENCLOSED MONITORING INSTRUCTION
• AS PER ENCLOSED MONITORING INSTRUCTION
• AS PER ENCLOSED MONITORING INSTRUCTION

• AS PER ENCLOSED MONITORING INSTRUCTION

Conversion of Tungsten Scrap to Pure Tungsten Powder as per ARDE Specification and as per Enclosed Scope of Work,

AS PER ENCLOSED MONITORING INSTRUCTION (ANNEXURE B) AND SCOPE OF WORK (ANNEXURE A)

High Strength Tungsten Alloy (H.S.T.A.) Penetrator Blank for 120mm FSAPDS MK-II, Drawing No: K PEN 120 2 455B REV 0

AS PER ENCLOSED DRAWING (ANNEXURE B) AND MONITORING INSTRUCTION FOR INSPECTION (ANNEXURE A)

Appendix D of provisional specification No.S/2594/B/TC-15

Appendix D of provisional specification No.S/2594/B/TC-15

ALL TYPES OF SERVICE CONTRACT

ALL TYPES OF SERVICE CONTRACT

WASHER TO DRG.NO.N5-35.

WASHER TO DRG.NO.N5-35.

HEX.SCREW TO DRG.NO.N2-140.

HEX.SCREW TO DRG.NO.N2-140.

HEX.SCREW TO DRG.NO.N2-140 .

HEX.SCREW TO DRG.NO.N2-140 .

SCREW HEX HEAD 8X30MM N2-140

SCREW HEX HEAD 8X30MM N2-140

MULTI TOOTH LOCK WASHER-B,5.1IS5371

MULTI TOOTH LOCK WASHER-B,5.1IS5371

SCREW,GRUB,FLAT,END PSS-4X6.

SCREW,GRUB,FLAT,END PSS-4X6.

N2-31.

NUT DRG.675-55-248

NUT DRG.675-55-248

SPACER-X TO DRG.NO.DW-1071-1035-14.

SPACER-X TO DRG.NO.DW-1071-1035-14.

DW-1071-1035-14.

WIRE STEEL KO 1.4 GOST 792.

WIRE STEEL KO 1.4 GOST 792.

STUD TO DRG NO. 700-29-260

STUD TO DRG NO. 700-29-260

NUT HEX.M8X1

NUT HEX.M8X1

520.02.001-02