HDPE Woven Sac Bags (25 Kg Capacity) for packing of TNT as per drawing NO. HE-5036/B.

DRW NO. HE-5036/B

DRW NO. HE-5036/B

PALE YELLOW LIQUID - NO SUSPENDED MATTER OR SEDIMENT.TOTAL ACIDITY (AS HNO3)% BY MASS 57 TO 62, NITROUS ACID (AS HNO2)% BY MASS MAX 0.2, RESIDUE ON IGNITION % BY MASS MAX 0.01,CHLORIDES (AS CL)% BY MASS 0.001, SULPHATES (AS H2SO4)% BY MASS MAX0.03, ORGANIC MATTER - NIL

IND/ME/129 & IS: 264-2005 (Reaff 2010) 3rd revision, HEF /IO/DNA/02 DT.25.10.2017,

• test

• test

In lay flat condition Five Ply with additional bottom liner and side sleeve and with handle of cotton webbing color olive green for packing 20 Kgs of TNT to specn IO/81/2003 DT 20.02.2003 DRG. NO. HE/5035 (Amendment Dt 22/08/2006)

to specification no: HEF/IO/81/2003 DT 20.02.2003

DRG. NO. HE/5035 (AMENDMENT DT 22.08.2006)

STEEL ROUND 38MM DIA 350 PLUS 3MM

STEEL ROUND 38MM DIA 350 PLUS 3MM

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 8

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AS PER DRG

AS PER DRG

Nickel Powder as per CQAM-58 Specification

As per enclosed Monitoring Instructions No: HAPP/QA/SC/G/028, Issue No. 01, Rev. No.02, Date of Issue 18/01/2017 (Annexure A).

TUNGSTEN POWDER

CQAM-58 SPECIFICATION

COAL SIZE 5 KGS LUMP MINIMUM

COAL SIZE 5 KGS LUMP MINIMUM

DRG NO. CQA (ME) IND/ME/9

DRG NO. CQA (ME) IND/ME/9

TAPE ADHESIVE FABRIC W/P 20 MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

TAPE ADHESIVE FABRIC W/P 20 MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

CIA/AMN/2158PT ISV 1740

CIA/AMN/2158PT ISV 1740

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

DRG.PT.NO. ISV 862 DCI-36

DRG.PT.NO. ISV 862 DCI-36

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67

CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

ANTISTATIC PACKING PIECES CONSISTING OF (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

(1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. RED SIGNAL ISC 537 OF IS:5 2007 REAFF 2012 (VITH REV)(LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A, SPECN. NO. CQA(A) 1504(E) DC 35870-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A

STRAPPING 13MM WIDEX 0.5MM THICK TENSILE STRENGTH 63 TO 70 KGF/SQR MM (618N/SQRMM TO 686N/SQRMM) BLUE FININSH. COIL IMME-RSED IN ANTIRUST SOLUTION PRIOR TO WRAPPING WITH SUITABLE HESSIAN CLOTH.

APPROX OUTSIDE DIA OF COIL TO BE 650MMXINT DIA 400MM SPECN IS5872-1990(LATEST) REVISION IIND REAFF : 2010

AMMUNITION PROTECTIVE COMPOSITION NO 2 (CEMENT RD 1192 K AMMUNITION)

SPECN JSS 8030-14-2009 (REVISION NO.3) DC 4054-ME, DT 08.01.2010

AMMUNITION PROTECTIVE COMPOSITION NO.10(LUTING THIN MK-5) SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

GAS TO BE SUPPLIED IN FIRM'S CYLINDERS

HEF/IO/64 DATED 21.12.1995 ELECTROLYTIC GRADE (FROM ELECTROLYSIS OF WATER)

SPEC. HEF/IO/68B DT 25.04.08 (A) CLEAR LIQUID (B) SP.GR.AT 20DEG CENT.MAX.0.73 (C)TEA CONTENT 98.5% MIN. (D)WATER INSOL.MIX OF TEA & WATER IN 1.1 RATIO BY VOL.&COOLED TO 18 DEG.CENT SHOULD BE COMPLETELY MISCIBLE (E) DIST.RANGE 85-91 DEG.CENT MIN 95% (F)WATER CONTENT LESS THAN 0.1% (BY KARL FISHER METHOD)

HEF/IO/68B DT. 25.04.08

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)

FOR SLAB DEMOLITION TNT 500 gms

DRG NO. IND/ME/74 DC 3752-ME DT 12.12.02 (LASTEST ISSUE)

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

IS : 264 - 2005 (REAFF 2017) III RD REV. TOTAL ACIDITY (AS HNO3) PERCENT BY MASS, MIN (EXPLOSIVE GRADE) : 98.0% RE-SIDUE ON IGNITION PERCENT MIN. 0.05, CHLORIDES (AS CL) PER-CENT MAX 0.001, SULPHATE (AS H2SO4) PERCENT MAX 0.03 NITROUS ACID AS (HNO2) PERCENT BY MASS MAX 0.2

IS : 264 - 2005 (REAFF 2017) III RD REV

HDPE Woven Sac Bags (25 Kg Capacity) for packing of TNT as per drawing NO. HE-5036/B.

DRW NO. HE-5036/B

DRW NO. HE-5036/B

ROW WOODEN (DEODAR WOOD) 1410MMX130MMX9MM

IS:1326 DEODAR WOOD BEST TRADE QUALITY AS PER DRG. NO OPF/GC/OARS

ROW WOODEN (DEODAR WOOD) 1410MMX130MMX9MM

IS:1326 DEODAR WOOD BEST TRADE QUALITY AS PER DRG. NO OPF/GC/OARS

MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3

MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3

PARA ARAMID UD FABRIC 160 CM WIDTH

PARA ARAMID UD FABRIC 160 CM WIDTH

PIN AXIS LINK FOR 9MM AUTO PISTOL

PIN AXIS LINK FOR 9MM AUTO PISTOL

SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL

K-1204*

K-1204*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

DRG. No.155-1070, DC No.36792-A, Dt.01.11.2001 (SPECIAL REQUIREMENT HEIGHT SHOULD BE 33.7 - 0.5 MM)

DRG. No.155-1070, DC No.36792-A, Dt.01.11.2001 (SPECIAL REQUIREMENT HEIGHT SHOULD BE 33.7 - 0.5 MM)

Set of Phosphorous Bronze Raw Material as per Annexure PBMTL

Set of Phosphorous Bronze Raw Material as per Annexure PBMTL

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UD FABRIC WITH MATERIAL GRADE OF SPECTRA SHIELD 3124 OR DYNEEMA HB50 MINIMUM 160 CM WIDTH

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UD FABRIC WITH MATERIAL GRADE OF SPECTRA SHIELD 3124 OR DYNEEMA HB50 MINIMUM 160 CM WIDTH

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

• MSME

• MSME

GASEOUS TRITIUM LUMINOUS SOURCE

K1036

K1036

VALVE BOX 765 10 SB543

VALVE BOX 765 10 SB543

VALVE BOX 765 10 SB542

VALVE BOX 765 10 SB542

Set of Bearings as per Annexure BEARG1 Make SKF for Kavach Mod II, Qty: 08 Sets

Set of Bearings as per Annexure BEARG1 Make SKF for Kavach Mod II, Qty: 08 Sets

SET OF 10 TYPES OF CABLES FOR DCH FOR CMT

SET OF 10 TYPES OF CABLES FOR DCH FOR CMT

Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II

Manufacturing and supply of set of Fabrication and Sheet Metal Works as per Annexure FSMW1 for Kavach Mod II

Annexure FSMW1 for Kavach Mod II

Item No.1 : SILICON CARBIDE CERAMIC ARMOUR PLATE FRONT/BACK – STANDARD. Item No.2 : SILICON CARBIDE CERAMIC ARMOUR PLATE SIDE – STANDARD. Item No.3 : SILICON CARBIDE CERAMIC ARMOUR PLATE FRONT/BACK – LARGE. Item No.4 : SILICON CARBIDE CERAMIC ARMOUR PLATE SIDE – LARGE.

Item No.1 : SILICON CARBIDE CERAMIC ARMOUR PLATE FRONT/BACK – STANDARD. (As per attached file Technical Specification for Item No.1 alongwith Drawing) Item No.2 : SILICON CARBIDE CERAMIC ARMOUR PLATE SIDE – STANDARD. (As per attached file Technical Specification for Item No.2 alongwith Drawing) Item No.3 : SILICON CARBIDE CERAMIC ARMOUR PLATE FRONT/BACK – LARGE. (As per attached file Technical Specification for Item No.3 alongwith Drawing) Item No.4 : SILICON CARBIDE CERAMIC ARMOUR PLATE SIDE – LARGE. (As per attached file Technical Specification for Item No.4 alongwith Drawing)

as per requirement

as per requirement

set of toughened steel raw material as per Annexure STRMTL1

set of toughened steel raw material as per Annexure STRMTL1

set of hardened and tempered steel raw material as pe Annexure HTSRMTL1

set of hardened and tempered steel raw material as pe Annexure HTSRMTL1

set of case hardened steel raw material as pe Annexure CHSRMTL1

set of case hardened steel raw material as pe Annexure CHSRMTL1

Set of stainless steel raw material as per Annnexure SSRMTL

Set of stainless steel raw material as per Annnexure SSRMTL

BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT

BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT

AS PER DRAWING

INVESTMENT CASTING OF RETAINER SPRING RECOIL FOR RIFLE 5.56 MM INSAS.

INVESTMENT CASTING OF RETAINER SPRING RECOIL. FOR RIFLE 5.56 MM INSAS.

TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS

TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS

RFISK.NO.7057*-S

INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS

INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS

RFI SK. NO. 6097*12

I.C. OF CUP TO RFI SK. NO. 4692*6(FOR RIFLE 5.56MM INSAS 1B1)

I.C. OF CUP TO RFI SK. NO. 4692*6(FOR RIFLE 5.56MM INSAS 1B1)

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

SILASTIC JRTV SILICON RUBBER THAT VULCANISED AT ROMM TEMP AND COMPOSED OF TWO COMPONENTS-PRIMER & HARDENER, BASE-90% &HARDENER-10%, SOURCE:DOW CORNING

SILASTIC JRTV SILICON RUBBER THAT VULCANISED AT ROMM TEMP AND COMPOSED OF TWO COMPONENTS-PRIMER & HARDENER, BASE-90% &HARDENER-10%, SOURCE:DOW CORNING

PRIMER FOR JRTV ADHESION, DOW CORNING 92-023

PRIMER FOR JRTV ADHESION, DOW CORNING 92-023

SPECIFICATION NO. IS : 536-1968

SPECIFICATION NO. IS : 536-1968

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

• as tender document

• as tender document

CLOTH DUCK,RIP STOP,COTTON,610g,OLIVE GREEN,WATER PROOF 91cm WIDE.IND/TC/0145.

CLOTH DUCK,RIP STOP,COTTON,610g,OLIVE GREEN,WATER PROOF 91cm WIDE.IND/TC/0145.

PACKING PREFORMED OR PACKING TO D.S CAT.NO.5330-382980 SHT-1 TO 4. NOTE:-RUBBER MIXED CLAUSE AS PER CQA(ME)KIRKEE CODE OF PRACTICE (LATEST ISSUE). IFL-8039.

PACKING PREFORMED OR PACKING TO D.S CAT.NO.5330-382980 SHT-1 TO 4. NOTE:-RUBBER MIXED CLAUSE AS PER CQA(ME)KIRKEE CODE OF PRACTICE (LATEST ISSUE). IFL-8039.

PACKING, PREFORMED,OR PACKING TO D.S.CAT.NO.5330-382978 SHT -1 TO 4. IFL - 8037.

PACKING, PREFORMED,OR PACKING TO D.S.CAT.NO.5330-382978 SHT -1 TO 4. IFL - 8037.

PACKING,PREFORMED OR PACKING TO DS.CAT.NO.5330-382979 SHT-1 TO 4 . IFL 8038.

PACKING,PREFORMED OR PACKING TO DS.CAT.NO.5330-382979 SHT-1 TO 4 . IFL 8038.

S.ST.SHEET SIZE 6 MM THICK( X 1250 MM X 2500 MM) TO SPECN. STA-60 'A1' CONDITION.

S.ST.SHEET SIZE 6 MM THICK( X 1250 MM X 2500 MM) TO SPECN. STA-60 'A1' CONDITION.

VALVE AIR OR OIL PT.NO.1015-000639

VALVE AIR OR OIL PT.NO.1015-000639

GLAND TO PART NO.1015-000588

GLAND TO PART NO.1015-000588

9080081383 tube housing forgings & rough machining

DRG. NO. LFG/09/C/166

DRG. NO. LFG/09/C/166

Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072.

Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072.

Drg. No.SK-JVPC-1072.

DETACHABLE ALIGNMENT RING

DRG.NO.:ADRDE/1296-G(b) DRD/29/98.

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

DETACHABLE SHROUD LINK

DETACHABLE SHROUD LINK

DRG. NO.:ADRDE/1299-G(c) DRD/32/98

• As per Drawing/specification

• As per Drawing/specification