PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A

PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A

Pin Axis Trigger for 9mm Auto Pistol

Pin Axis Trigger for 9mm Auto Pistol

SPRING MAIN FOR 9MM AUTO PISTOL 1A

SPRING MAIN FOR 9MM AUTO PISTOL 1A

DOUBLE BARREL FORGING for 9mm Auto Pistol

DOUBLE BARREL FORGING for 9mm Auto Pistol

BLOCK FOR INFORMATION BLOCK IG46 DRG NO AL6672431 LF 7440200801

BLOCK FOR INFORMATION BLOCK IG46 DRG NO AL6672431 LF 7440200801

ADJUSTING MECHANISM DRG NO. AL6063490 ADJUSTING MECHANISM FOR INFORMATION BLOCK IG46 TO DRG.NO. AL6063490

ADJUSTING MECHANISM DRG NO. AL6063490 ADJUSTING MECHANISM FOR INFORMATION BLOCK IG46 TO DRG.NO. AL6063490

DRG NO. AL6063490

CONTROLING MECHANISM DRG NO. AL6063271 CONTROLING MECHANISM FOR INFORMATION BLOCK 1G46 TO DRG.NO. AL6063271

CONTROLING MECHANISM DRG NO. AL6063271 CONTROLING MECHANISM FOR INFORMATION BLOCK 1G46 TO DRG.NO. AL6063271

DRG NO. AL6063271

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

675- 54-190

Al plate 40X1000X2500MM

Al plate 40X1000X2500MM

SYLPOT -10 (POTTING GEL) PROPRIETORY ITEM OF M/S WACKER-METROARK CHEM. PVT. LTD.,CALCUTTA.

SYLPOT -10 (POTTING GEL) PROPRIETORY ITEM OF M/S WACKER-METROARK CHEM. PVT. LTD.,CALCUTTA.

GUILDING METAL STRIP TO BS 2870-1980 CZ 102 OR CZ 101ANNEALED WITH HARDNESS 55 TO 75 VPN. SIZE 129 +/-0.5 MM WIDE X 0.4(+)0.076 (-) 0.051 MM THICK IN COIL FORM.

GUILDING METAL STRIP TO BS 2870-1980 CZ 102 OR CZ 101ANNEALED WITH HARDNESS 55 TO 75 VPN. SIZE 129 +/-0.5 MM WIDE X 0.4(+)0.076 (-) 0.051 MM THICK IN COIL FORM.

BRASS STRIP TO JSS-9535-02:2008, REVISION NO.3 ANNEALED WITH HARDNESS 55 TO 75 VPN.SIZE 22 MM +/- 0.5 MM WIDE X 0.42 MM+/- O.O25 MM THICK IN COIL FORM

BRASS STRIP TO JSS-9535-02:2008, REVISION NO.3 ANNEALED WITH HARDNESS 55 TO 75 VPN.SIZE 22 MM +/- 0.5 MM WIDE X 0.42 MM+/- O.O25 MM THICK IN COIL FORM

STRIP BRASS, SIZE 83 +/- 0.5 MM WIDE X 0.7 MM +/- 0.03 MMTHICK TO SPECN. NO. JSS 9535-02: 2008, REVISION NO.3,HARDNESS 55 TO 75 VPN.

STRIP BRASS, SIZE 83 +/- 0.5 MM WIDE X 0.7 MM +/- 0.03 MMTHICK TO SPECN. NO. JSS 9535-02: 2008, REVISION NO.3,HARDNESS 55 TO 75 VPN.

BRASS STRIP TO SPECN. JSS 9535-2 DC(I)123 MS, HALF HARD WITHHARDNESS 110 TO 130 VPN. SIZE 35 MM +/- 0.25 MM WIDTH X 0.56MM +/- 0.025 MM THICK.

BRASS STRIP TO SPECN. JSS 9535-2 DC(I)123 MS, HALF HARD WITHHARDNESS 110 TO 130 VPN. SIZE 35 MM +/- 0.25 MM WIDTH X 0.56MM +/- 0.025 MM THICK.

STRIP BRASS,SIZE 12 PLUS MINUS 0.2 MM WIDE X 0.5 PLUS MINUS0.02 MM THICK TO SPECN.BS 2870-1980 GRADE CZ 106 IN "O"CONDITION.

STRIP BRASS,SIZE 12 PLUS MINUS 0.2 MM WIDE X 0.5 PLUS MINUS0.02 MM THICK TO SPECN.BS 2870-1980 GRADE CZ 106 IN "O"CONDITION.

STRIP ALUMINIUM SIZE 18 PLUS MINUS 0.2 MM WIDE X 0.6 PLUSMINUS 0.02 MM THICK TO SPECN.IS-737-1986 GRADE 53000 IN "O"CONDITION.

STRIP ALUMINIUM SIZE 18 PLUS MINUS 0.2 MM WIDE X 0.6 PLUSMINUS 0.02 MM THICK TO SPECN.IS-737-1986 GRADE 53000 IN "O"CONDITION.

STRIP ALUMINIUM ALLOY SIZE 12 PLUS MINUS 0.2 MM WIDE X0.38 PLUS MINUS 0.02 MM THICK TO SPECN IS 737 - 1986GRADE-19000 CONDITION H4

STRIP ALUMINIUM ALLOY SIZE 12 PLUS MINUS 0.2 MM WIDE X0.38 PLUS MINUS 0.02 MM THICK TO SPECN IS 737 - 1986GRADE-19000 CONDITION H4

STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.

STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.

• 1. Forging 2. Machning 3. Rubberising

• 1. Vernier caliper 2. Height gauge 3. Hardness testing

STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.

STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.

DRG.PART NO. IRW 30 SA.

STEEL PACKAGE FOR ROUND 120 MM FSAPDS MK-II TO ARDE DRG.NO.1006 05 16 00 00 000 12TA & ARDE DRG.NO.1006 05 16 00 00 000 22 TA (ARDE DOCUMENT NO. DRDO-ARDE-DOA-SPEC-248-2018)

STEEL PACKAGE FOR ROUND 120 MM FSAPDS MK-II TO ARDE DRG.NO.1006 05 16 00 00 000 12TA & ARDE DRG.NO.1006 05 16 00 00 000 22 TA (ARDE DOCUMENT NO. DRDO-ARDE-DOA-SPEC-248-2018)

ARDE DRG.NO.1006 05 16 00 00 000 12TA & ARDE DRG.NO.1006 05 16 00 00 000 22 TA

SLEEVE DISTANCE FOR PRIMER ELECTRIC L1A4 MKII DESIGNDRG.NO. IQX 1053 FOR 120 MM HESH AMMN.

SLEEVE DISTANCE FOR PRIMER ELECTRIC L1A4 MKII DESIGNDRG.NO. IQX 1053 FOR 120 MM HESH AMMN.

DRG.NO. IQX 1053 FOR 120 MM HESH AMMN.

SLEEVE CAPSULE FOR PRIMER ELECTRIC L1A4 MKII DESIGNDRG.NO. IQX 1052 FOR 120MM HESH AMMN.

SLEEVE CAPSULE FOR PRIMER ELECTRIC L1A4 MKII DESIGNDRG.NO. IQX 1052 FOR 120MM HESH AMMN.

DRG.NO. IQX 1052 FOR 120MM HESH AMMN.

SLEEVE SIZE: 103MM LONG X 32.5MM OD X 30MM IDDRG.NO.ARDE/2237 DETL.1SPCN:HDPE TO SPECN NO.7330-03 GRADE-`C' TYPE-2

SLEEVE SIZE: 103MM LONG X 32.5MM OD X 30MM IDDRG.NO.ARDE/2237 DETL.1SPCN:HDPE TO SPECN NO.7330-03 GRADE-`C' TYPE-2

SLEEVE "B" TO DRAWING NUMBER PROP/SK-294 FOR PACKING OF FUZE162 MK-8 AND MK-9.

SLEEVE "B" TO DRAWING NUMBER PROP/SK-294 FOR PACKING OF FUZE162 MK-8 AND MK-9.

CELLULOID SHEET TRANSPARENT 0.20 MM THICK TO SPECN. NO.JSS 1375-03: 2004 (REV. NO.2)

CELLULOID SHEET TRANSPARENT 0.20 MM THICK TO SPECN. NO.JSS 1375-03: 2004 (REV. NO.2)

SET OF COMBUSTIBLE CARTG.CASE HESH TO DRG.NO.IRW 4GE CONSISTING (1 NO.EACH) (1) COMBUSTIBLE BODY HESH TO DRG.NO.IRW 241(2) COMBUSTIBLE CAP HESH TO DRG.NO.IRW 242 (3)SPACER TO DRG.NO.IRW 243 (4) COMBUSTIBLE CAP HESH SPACER DETL.NO.4 WITHPACKAGES CQA(A) SPECN.NO. CQA(A) 338.

SET OF COMBUSTIBLE CARTG.CASE HESH TO DRG.NO.IRW 4GE CONSISTING (1 NO.EACH) (1) COMBUSTIBLE BODY HESH TO DRG.NO.IRW 241(2) COMBUSTIBLE CAP HESH TO DRG.NO.IRW 242 (3)SPACER TO DRG.NO.IRW 243 (4) COMBUSTIBLE CAP HESH SPACER DETL.NO.4 WITHPACKAGES CQA(A) SPECN.NO. CQA(A) 338.

SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A.

SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A.

RING TO DRG. NO. 4- 025998 DETAIL NO. 78 DC-35357A FOR ROUND125 MM HEAT.

RING TO DRG. NO. 4- 025998 DETAIL NO. 78 DC-35357A FOR ROUND125 MM HEAT.

RETAINER TO DRG NO. 9102 00 01 00 01 003 00TA FOR 30 MM GREN-ADE RUDRA AGS-17.

RETAINER TO DRG NO. 9102 00 01 00 01 003 00TA FOR 30 MM GREN-ADE RUDRA AGS-17.

SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHESH CAP DRG.NO.HEMRL/CCC/2005/SK-008

SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHESH CAP DRG.NO.HEMRL/CCC/2005/SK-008

• SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHESH CAP DRG.NO.HEMRL/CCC/2005/SK-008

• SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHESH CAP DRG.NO.HEMRL/CCC/2005/SK-008

SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDISC DRG.NO.HEMRL/CCC/2005/SK-003 DET.3

SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDISC DRG.NO.HEMRL/CCC/2005/SK-003 DET.3

RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSINGDISC (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.3 SHT.4)

RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSINGDISC (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.3 SHT.4)

PLUG KEY HOLE DIA:7.75MM-0.25MM, LENGTH: 5.59MM-0.25MM,BRASSSPECN: BS-2874,CZ-1213PB.

PLUG KEY HOLE DIA:7.75MM-0.25MM, LENGTH: 5.59MM-0.25MM,BRASSSPECN: BS-2874,CZ-1213PB.

PIECE PACKING TOP & BOTTOMSIZE:-254MM X 130MM X 20MM THICKMTL:EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PIECE PACKING TOP & BOTTOMSIZE:-254MM X 130MM X 20MM THICKMTL:EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PIECE PACKING SIDESIZE:-274MM X 172MM X 6MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PIECE PACKING SIDESIZE:-274MM X 172MM X 6MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PIECE PACKING ENDSIZE: 172MM X 130MM X 10MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PIECE PACKING ENDSIZE: 172MM X 130MM X 10MM THICKMTL: EXPANDED POLYETHELENE FOAM TO DENSITY 25 TO 30 KG/M3

PHOSPHATING STARTER POWDER(PROPRIETARY PRODUCT OF M/S HENKELCHEMBOND BOMBAY).

PHOSPHATING STARTER POWDER(PROPRIETARY PRODUCT OF M/S HENKELCHEMBOND BOMBAY).

PAPER NATURAL BROWN COLOR OF 990MM WIDTH FOR CARTRIDGE CASEAMMN.TO SPECN.NO.JSS 8135-09:2004 (REV-2)(REAFFIRMED 2011)DC NO.5065-ME DT.10-01-2012.

PAPER NATURAL BROWN COLOR OF 990MM WIDTH FOR CARTRIDGE CASEAMMN.TO SPECN.NO.JSS 8135-09:2004 (REV-2)(REAFFIRMED 2011)DC NO.5065-ME DT.10-01-2012.

PAINT SYNTHETIC,ENAMEL,EXTERIOR,BRUSHING FINISHING 1ST QUALITY TO IS SPECIFICATION,AS PER IS NO.2932-1993.SHADE SIGNALRED PACKED IN 4 LITRES SEALED CONTAINER.MAKE:- ASIAN / J&N / BERGER / NEROLAC.

PAINT SYNTHETIC,ENAMEL,EXTERIOR,BRUSHING FINISHING 1ST QUALITY TO IS SPECIFICATION,AS PER IS NO.2932-1993.SHADE SIGNALRED PACKED IN 4 LITRES SEALED CONTAINER.MAKE:- ASIAN / J&N / BERGER / NEROLAC.

PAINT RFU AMMUNITION BITUMINOUS BRUSHING,ANTI CORROSIVE,BLACK TO SPECIFICATION NO. JSS 8010-24:2014 (REV NO.3)

PAINT RFU AMMUNITION BITUMINOUS BRUSHING,ANTI CORROSIVE,BLACK TO SPECIFICATION NO. JSS 8010-24:2014 (REV NO.3)

PAINT GOLDEN YELLOW

PAINT GOLDEN YELLOW

PAD SHOULDER (ISV 106 SA) FOR AMMUNITION CARRIER 10C AS PERSPECIFICATION NO. CQA (A) 2804 (M).

PAD SHOULDER (ISV 106 SA) FOR AMMUNITION CARRIER 10C AS PERSPECIFICATION NO. CQA (A) 2804 (M).

PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177

PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177

DRG NO. FQ/XI/177

NG BARRIER FOR 120MM HESH AMMN. TO SPECN. NO. HEMRL/CCC/PS/408, SEPT. 2014 & DRG. NO. HEMRL/CCC/120/HESH/2014

NG BARRIER FOR 120MM HESH AMMN. TO SPECN. NO. HEMRL/CCC/PS/408, SEPT. 2014 & DRG. NO. HEMRL/CCC/120/HESH/2014

DRG. NO. HEMRL/CCC/120/HESH/2014

NET COTTON TO SPECN. NO. HEMRL / GP / PS / 252 (PROV) & DES.REF. HEMRL- 1399R1 TO DRG. PART NO. IRW 240.

NET COTTON TO SPECN. NO. HEMRL / GP / PS / 252 (PROV) & DES.REF. HEMRL- 1399R1 TO DRG. PART NO. IRW 240.

MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)

MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)

MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE)

MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE)

MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)

MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)

MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)

MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)

MINE A T 1B ND EMPTY

MINE A T 1B ND EMPTY

LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018)

LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018)

ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018)

• Paper Rolling / Lamination machine , Punching Press Embossing , Cutting Machine, Phosphating Spinning process for securing cap end

• Tensile test machine, Crushing test machine, Drop test Rust proof test, Coating mass

GLYCERINE,FOR NITRATION TO SPECIFICATION NO.JSS 6810-109:2007 (REVISION NO.2) DC 3904-ME DATED 21.07.2008.

GLYCERINE,FOR NITRATION TO SPECIFICATION NO.JSS 6810-109:2007 (REVISION NO.2) DC 3904-ME DATED 21.07.2008.

GARDACID MZ FOR PINAKA ROCKET.

GARDACID MZ FOR PINAKA ROCKET.

GAINE 1A EMPTY TO DRG.PART NO.IQX 58 GE DC NO.34637-A.

GAINE 1A EMPTY TO DRG.PART NO.IQX 58 GE DC NO.34637-A.

DRG.PART NO.IQX 58 GE DC NO.34637-A.

FOIL LEAD TIN TO SIZE 571.5 MM X 342.9 MM X 0.03 MM THICK TOSPECIFICATION JSS 9535-06 : 2010 (REVISION NO.2) DC 4085-ME

FOIL LEAD TIN TO SIZE 571.5 MM X 342.9 MM X 0.03 MM THICK TOSPECIFICATION JSS 9535-06 : 2010 (REVISION NO.2) DC 4085-ME

FOIL ALUMINIUM SIZE 25 PLUS MINUS 0.5 MM WIDE X 0.05 PLUS 0.01 MM THICK TO SPECN. NO. IS: 737 -1986, DESIGN. 19500OR BS-1470 DESIGN. S1A OR S1B,CONDITION-M

FOIL ALUMINIUM SIZE 25 PLUS MINUS 0.5 MM WIDE X 0.05 PLUS 0.01 MM THICK TO SPECN. NO. IS: 737 -1986, DESIGN. 19500OR BS-1470 DESIGN. S1A OR S1B,CONDITION-M

FEVICOL ANR 136

FEVICOL ANR 136

EPOXY ADHESIVE (ARALDITE AV138M + HARDENER HV998)

EPOXY ADHESIVE (ARALDITE AV138M + HARDENER HV998)

ELECTRONIC FUZE M85P13 A2 (PROXIMITY & POINT DETONATING) TODRG. NO.0908-502458-3A (ASSEMBLY FUZE FILLED A2), PRODUCTSPECIFICATION NO.51000083/A2 WITH AQL- 6.5 % REQUIRED FORPROVING OF 130MM AMMUNITION .

ELECTRONIC FUZE M85P13 A2 (PROXIMITY & POINT DETONATING) TODRG. NO.0908-502458-3A (ASSEMBLY FUZE FILLED A2), PRODUCTSPECIFICATION NO.51000083/A2 WITH AQL- 6.5 % REQUIRED FORPROVING OF 130MM AMMUNITION .

DRG. NO.0908-502458-3A (ASSEMBLY FUZE FILLED A2)

DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE.

DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE.

DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977

COPPER ALLOY STRIP SIZE 45 +/-0.5 MM WIDE X 2 +/-0.1 MM TH. TO SPECIFICATION NO. BS EN 1652:1997. SYMBOL CUZN10. NUMBER CW 501L WITH MATERIAL CONDITION H110, HARDNESS 110-130 HV.REQUIRED FOR TRACER NO.12 OF SHELL 125MM HEAT.

COPPER ALLOY STRIP SIZE 45 +/-0.5 MM WIDE X 2 +/-0.1 MM TH. TO SPECIFICATION NO. BS EN 1652:1997. SYMBOL CUZN10. NUMBER CW 501L WITH MATERIAL CONDITION H110, HARDNESS 110-130 HV.REQUIRED FOR TRACER NO.12 OF SHELL 125MM HEAT.

CONTAINER ASSEMBLY AS PER ARDE DRG.NO. ARDE-9759 DETL.NO. 6SHT.2

CONTAINER ASSEMBLY AS PER ARDE DRG.NO. ARDE-9759 DETL.NO. 6SHT.2

ARDE DRG.NO. ARDE-9759 DETL.NO. 6SHT.2

COMPOSITION, BITUMINOUS, R.D 1083SPECIFICATION NO. C.S. 2907-A AMENDMENT A DT.12-07-1963.

COMPOSITION, BITUMINOUS, R.D 1083SPECIFICATION NO. C.S. 2907-A AMENDMENT A DT.12-07-1963.

NOTCHED CLOSED COIL TO DRG.NO. 9102-00-01-00-01-002-00TB FORFOR 30MM AGS-17 AMMN.

NOTCHED CLOSED COIL TO DRG.NO. 9102-00-01-00-01-002-00TB FORFOR 30MM AGS-17 AMMN.

DRG.NO. 9102-00-01-00-01-002-00TB

CLOTH CALICO WHITE BLEACHED 1400 MM WIDE.TO SPECN.IS:5088-1982 VARIETY NO.7.

CLOTH CALICO WHITE BLEACHED 1400 MM WIDE.TO SPECN.IS:5088-1982 VARIETY NO.7.

BITUMEN PELLET AS PER DESIGNER'S REFERENCE 155-1090 FORPRODUCTION OF SHELL 155MM BB/BT.

BITUMEN PELLET AS PER DESIGNER'S REFERENCE 155-1090 FORPRODUCTION OF SHELL 155MM BB/BT.

APC 217 TO SPECN. JSS 8010-42:2009 (REV. NO.3) WITH PH VALUE 6 TO 7

APC 217 TO SPECN. JSS 8010-42:2009 (REV. NO.3) WITH PH VALUE 6 TO 7

AMMUNITION PROTECTIVE COMPOSITION NO.101 (RD-1061)SPECN.NO. JSS-8030-28:2003 (REV.NO.1) DC-3784-MEDATED : 25/09/2003

AMMUNITION PROTECTIVE COMPOSITION NO.101 (RD-1061)SPECN.NO. JSS-8030-28:2003 (REV.NO.1) DC-3784-MEDATED : 25/09/2003

• MILLING MIXING,STIRRING, ATTRITATION

• BROOKEFIELD, PTIMETER, FORDCUPS, OVEN

APC 12 (GREASE AMMUNITION).

SPECIFICATION NUMBER JSS:9150- 45 : 2006 (REVISION NUMBER 2)

ADHESIVE SS-89 (FRESH) TO SPECIFICATION NO.IND/ME/998(PROV)DC-3842-ME DT.04/04/2005

ADHESIVE SS-89 (FRESH) TO SPECIFICATION NO.IND/ME/998(PROV)DC-3842-ME DT.04/04/2005

ADDITIVE LINER TO DRG NO.IRW 165 FOR 105 MM APDS/T. SPECN.NO CQA(A) 0303(D) DCI 33783-A. MASS OF THE LINER 158 +/- 5 GM,SIZE: 430 X 395 X 335 MM. THICKNESS OF ADDITIVE LINER SHALLNOT BE MORE THAN 1.0 MM.

ADDITIVE LINER TO DRG NO.IRW 165 FOR 105 MM APDS/T. SPECN.NO CQA(A) 0303(D) DCI 33783-A. MASS OF THE LINER 158 +/- 5 GM,SIZE: 430 X 395 X 335 MM. THICKNESS OF ADDITIVE LINER SHALLNOT BE MORE THAN 1.0 MM.

2:4 DINITRO RESORCINOL SPECIFICATION NO.JSS-6810-127:2008REVISION NO.2, DC-3966-ME,DT.24/05/2009.

2:4 DINITRO RESORCINOL SPECIFICATION NO.JSS-6810-127:2008REVISION NO.2, DC-3966-ME,DT.24/05/2009.

WIRE STEEL SIZE 5 MM DIA, HALF HARD, ANNEALED FINISH TOSPECN IS 280-1978 (REAFFIRMED - 1992)

WIRE STEEL SIZE 5 MM DIA, HALF HARD, ANNEALED FINISH TOSPECN IS 280-1978 (REAFFIRMED - 1992)

WIRE MILD STEEL 4MM DIAIS 280 1978

WIRE MILD STEEL 4MM DIAIS 280 1978

BEES WAX REFINED GRADE A TO SPCN: IS 1504 : 1996(3RD REVISION) (MELTING POINT 61 C )

BEES WAX REFINED GRADE A TO SPCN: IS 1504 : 1996(3RD REVISION) (MELTING POINT 61 C )

TOLUENE PURE TO SPECN NO. IS-537-1967(FIRST REVISION)(WITHAMENDMENT NO.1 & 2). REAFFIRMED 2000.

TOLUENE PURE TO SPECN NO. IS-537-1967(FIRST REVISION)(WITHAMENDMENT NO.1 & 2). REAFFIRMED 2000.

TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.

TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.

THREAD COTTON SEWING 16 TEX X 27 (OR 36 S/27) UNDYED IS-1720 - 1978 (REAFFIRMED 1997) PROOFED WITH ZINC NAPTHANATE0.8 - 1.20%

THREAD COTTON SEWING 16 TEX X 27 (OR 36 S/27) UNDYED IS-1720 - 1978 (REAFFIRMED 1997) PROOFED WITH ZINC NAPTHANATE0.8 - 1.20%

THINNER PAINT (TURPENTINE SUBSTITUTE) AMMN. TO SPECN. NO.JSS 8010-26:2009,(REVISION NO.2) DC NO.3978-ME DT.24.09.2009

THINNER PAINT (TURPENTINE SUBSTITUTE) AMMN. TO SPECN. NO.JSS 8010-26:2009,(REVISION NO.2) DC NO.3978-ME DT.24.09.2009

STRIP BRASS SIZE 40 MM WIDE X 0.1 MM THICK TO SPECN BS 2870-1980 CZ 106 OR CZ 107 QUARTER HARD OR IS 410-1977 REAFFIRMED1991 CU ZN 30 QUARTER HARD.

STRIP BRASS SIZE 40 MM WIDE X 0.1 MM THICK TO SPECN BS 2870-1980 CZ 106 OR CZ 107 QUARTER HARD OR IS 410-1977 REAFFIRMED1991 CU ZN 30 QUARTER HARD.