KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

MCT-1150/2

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

MCT-3234

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

PIVOT TO DRG NO. MCT-1100/1

PIVOT TO DRG NO. MCT-1100/1

MCT-1100/1

RING DRG.NO.MCT-2430

RING DRG.NO.MCT-2430

MCT-2430

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

MCT-2459

NUT TO DRG.NO.MCT-2451

NUT TO DRG.NO.MCT-2451

MCT-2451

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

SK 4407*

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

As per drawing

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

DRG.NO.0204-03-02-00-00-000-00AA,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

DRG.NO.SK-4745*2,

• as per attachment

• as per attachment

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

DRG NO. CQA(SA)SK - 998DS CAT NO. 1005-560839,

• Machining & assy.

• As per attached document

SILENCER JVPC 5.56MM

SILENCER JVPC 5.56MM

As per drawing

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) ,TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) , TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

COVER 678-71-CD111

AS SPECIFIED IN THE TENDER

678-71-CD111

PACKING 675-64-CD243

AS SPECIFIED IN THE TENDER

675-64-CD243

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

DRAWING NO.-OH-1032/49B R1

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

DRG.NO.SMR-402

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

DRG NO. SMR-401

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

DRG. NO. OH-386

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DRG.NO.NCC-416 R1

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.

PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

DRG.REGD NO.17244/1

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

DRG NO - NCC/444D.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

DRG. NO. HT-169

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SKETCH NO.HT/72R1

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL

PIN FIRING D S CAT NO-1005-000831 IN FINISHED CONDITION OFSMG 9MM CARBINE 1A1.DC(I) 24776-SA-DT.15-07-2000.,

PIN FIRING D S CAT NO-1005-000831 IN FINISHED CONDITION OFSMG 9MM CARBINE 1A1.DC(I) 24776-SA-DT.15-07-2000.,

D S CAT NO-1005-000831

GAS CYLINDER COVER MOULDING FOR JVPCDRG NO. 0204-03-02-00-00-001-00XA,

GAS CYLINDER COVER MOULDING FOR JVPCDRG NO. 0204-03-02-00-00-001-00XA,

DRG NO. 0204-03-02-00-00-001-00XA,

BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,

BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,

DRG. NO. 0204-03-03-01-12-000-00DA

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

DS CAT NO.1005-006633

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

DRG.NO.SKM-309*1

CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.,

CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.,

DS CAT NO.5140-000279

SCREW SOCKET HEAD TO DS CAT NO. 5305-005081 DC(I)26372-SA DT.16-8-07 IN FINISHED CONDITION.,

SCREW SOCKET HEAD TO DS CAT NO. 5305-005081 DC(I)26372-SA DT.16-8-07 IN FINISHED CONDITION.,

DS CAT NO. 5305-005081

ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,

ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,

DS CAT NO.1005-000358

BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,

BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,

DRG NO 23055A,SKM-902*1

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,

BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,

DRG NO-PHMK-IV-3-1-3

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

DS-CATNO.4930-000799

• Machining and Fabrication work

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION .,

CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION .,

(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITIONSMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

DS CAT NO 1005-000896

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02IN FINISHED CONDITION.,

GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02IN FINISHED CONDITION.,

DS CAT NO.1005-006843

PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),

PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),

DS CAT NO. 1005-000461

TELESCOPIC ROD, RETURN SPRING AS PER DS CAT NO. 1005- 006845DC(I) NO.25343-SA, DT.26.04.02,

TELESCOPIC ROD, RETURN SPRING AS PER DS CAT NO. 1005- 006845DC(I) NO.25343-SA, DT.26.04.02,

DS CAT NO. 1005- 006845

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993