CHARGES FOR MISC JOB - STENCILLING ON BOX H2A (EXCEPT LOT NO AS PER DRG. NO. ARDE SK 3131 FOR SA 5.56 MM PACKING/DRG. NO. CIA/AMN/ST/35 FOR 9MM PACKING AFFIXING OF EXPLOSIVE LABEL AND VARNISHING, SHIFTING OF H2A BOXES TO L2 SECTION
Specification
DRG. NO. ARDE SK 3131, DRG. NO. CIA/AMN/ST/35
Drawing no.
DRG. NO. ARDE SK 3131, DRG. NO. CIA/AMN/ST/35
Manufacturing Technology
Testing / Inspection Facility
96
517000
Number
46490
AFK/2017/FIRST/0015
Ammunition Factory Khadki
The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003
AMMUNITION CONTAINER BOX M 104 MK1 STEEL,DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS:5-1994.WITH AMENDMENT NO.1,DESIGNER'S REFERENCE DD(L)11325,,SPECN IA 1169
BOX C 28A STEEL DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS-5:2007 (SIXTH REVISION ) DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
BOX G-70 MK1 (STEEL), AS PER DRG.NO. DD(L) 12919, PART NO. SV 68A, MATERIAL, RUST PROOFING AND PAINTING AS PER DETAILS IN DRAWING WITH PAINT OF OLIVE GREEN SHADE, ISC 220 OF IS:5-1994 WITH AMENDMENT NO. 1, SPECN. NO. IA 1169
AMMUNITION CONTAINER BOX B-9 A STEEL,TO DESIGNER'S REF ARDE 2174,SHEET NO.3 PART NO.ISV 553A,SPECN IA 1169 BOXES TO BE PAINTED ASPER DRG WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-1994 WITH A.NO. 1 TO SPECN. IS:168-1993 3RD REV, AFTER APPLICATION OF PRIME-COAT OF RED OXIDE
BOX B 184,MK1/L STEEL W/O SEPARATOR PKG CARRIER (PART NO.ISV 293 OR ISV 294) DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS:5-2007(SIXTH REV. REAFF.2017) DESIGNER'S REF NO. IA 646 (2 SHEET) PART NO. ISV 91A,SHEET NO. 1, SHEET NO.2 SPECN IA 1169(n)
BOX WOOD NO :- S-5 MK-1(IN) AS PER DRG. NO.ARDE-2055 SHT NO.03 FOR PACKING OF SRCR, SRIR, SRCR(DUMMY) WITH PARTITION AS PER DRG.NO. ARDE 2055/1 (NOTE :- HEIGHT OF THE BOX TO BE TAKEN FOR SRCR ONLY)
BOX NO.B 279 MK1/AIR/WOOD TO HOLD 40 DETONATOR AIRCRAFT BOMB NO.50,51,52,56,57,58,60 AND 64 IN 4 CYLINDER NO.293 DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008
PAINT PREMIER GLOSS ENAMEL (NA), RED SIGNAL MAKE ASIAN PAINT / BERGE / DUCOHARD DRYING, BRUSHING TO SPECN, IS-2932-2003 CONFIRMING TO COLOUR CODE IS-5-1994 with A.No.1 SHADE NO.537, SUPPLIED IN 1 OR 4 LTR. CANS.
PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS, RED SIGNAL, ISC 537 OF IS:5-1994,WITH A.NO.1, SPECN. IS:138- 1992 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE),SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50.
Specification
IS:138- 1992 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE),SPECIAL REQUIREMENT
READY MIXED PAINT MARKING FOR PACKAGES & PETROL CONTAINERS WHITE SPECN IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 DEGREES TO 50 DEGREES.
Specification
IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
PAINT RM AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE OLIVE GREEN. ISC :220 OF IS:5-1994 WITH AMN.NO.1 SPECN: IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
Specification
IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
PAINT R.M.A.D. BRUSHING S.G. FINISH FOR GEN. PURPOSES MIDDLE BUFF ISC 359 OF IS 5:1994(4TH REVISION) WITH AMENDMENT NO 1 SPECN IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
Specification
IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
PAINT RM MARKING FOR PACKAGES & PETROL CONTAINER GOLDEN YELLOW.ISC NO.356 OF IS-5-1994.SPECN:IS 138-1992 3RD REV.WITH A.NO.1(AS APPLICABLE FOR DEFENCE USE), SPECIAL REQUIREMENT:- FINISH WITH GLOSS VALUE 31 TO 50.
COPPER ALLOY STRIP 0.19 + - 0.010MM THICK X 31.8MM + - 0.25 MM WIDE,ANEALED,HARDNSS 55 TO 75 HV,SPECN IS-3167-1982(FIRST REVISION) MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. COIL WEIGHT MAX. 10 KG.
BRASS STRIP 0.67MM PLUS MINUS 0.01MM THICK X 7.8MM PLUS 0.00 PLUS 0.30MM WIDE HARDNESS 55 TO 75HV. THICKNESS VARIAION MAX. 0.005MM ACROSS WIDTH AND 0.01MM LENGTH WISE IN A COIL FREE FROM ANISOTROPIC DEFECT SPEC. JSS-9535-02: -2008 REV. 3 WEIGHT OF EACH COIL 4 TO 5.5 KG
BRASS STRIP 0.30 mm + - 0.025 mm THICK X 75 mm + - 0.25 mm WIDE, ANNEALED, HARDNESS 55 TO 75 HV TO SPECN - JSS - 9535 - 02 - 2008 REV. 3 TO BE SUPPLIED IN COIL FORM OF I/D 100mm APPROX AND WEIGHT OF COIL TO BE 15 KG MAXIMUM.
BRASS STRIP 0.58 MM PLUS/MINUS 0.025MM THICK X 35.6 MM PLUS/ MINUS 0.25 MM WIDE,ANNEALED HARDNESS 55 TO 75 HV,SPECN- JSS-9535 - 02 - 2019 REV. NO. 5 THICKNESS VARIATION ACROSS WIDTH NOT TO EXCEED 0.005 MM, MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. WEIGHT OF COIL 7 KG MAX.
BRASS STRIP 0.81 MM +- 0.010MM THICK X 35.60MM +-0.25MM WIDE HARDNESS 55 TO 75 HV TO SPECN JSS 9535-02 VARIATION IN THICKNESS SHOULD NOT EXCEED 0.005MM ACROSS WIDTH. MATERIAL SHOULD BE FREE FROM ANISOTROPHY DEFECT. COIL WEIGHT TO BE APPROX 10 + - 2 KG
BRASS STRIP 0.70 +-0.010MMTHICK X 32.0+-0.25MM WIDE ANNEALED HARDNESS 55 TO 75 HV, GRAIN SIZE 0.035MMTO 0.045MM,VARIATION IN THICKNESS ACCROSS WIDTH NOT TO EXCEED 0.005 MM, TO SPECN JSS 9535-02 IN COILS,I/D 100MM APPROX,STRIP LENGTH 20-40 MTR COIL WT.1OKG MAX FREE FROM SURFACE BLEMISHES
BRASS STRIP 0.47 MM + - 0.010 MM THICK X 35.6 MM + - 0.25 MM WIDE.THICKNESS VARIATION ACROSS WIDTH MAXIMUM 0.005MM&0.01mm LENGTHWISE IN A COIL. FREE FROM ANISOTROPHY DEFECT. HARDNESS 80+- 10 HV. IN A COIL OF I/D 100 mm APPROX & WEIGHT OF COIL 10 KG+- 3 KG SPECN:JSS-9535-02-2008 REV. 3 )
BRASS STRIPS 1.00 mm + 0.02 mm THICK X 12.00 mm + - 0.25 mm WIDE, 1/4 HARD HARDNESS 70-95 HV,SPECIFICATION JSS-9535-02- 2008 REV. 3 (WT OF COIL 5 TO 7 KG).
BRASS STRIP 0.42 MM - 0.02 MM THICK X 39.5 MM + - 0.25 MM WIDE, HARDNESS 55 TO 75 HV, SPECIFICATION JSS-9535-02-2008 Rev.3. FREE FROM ANISOTROPHY DEFECT,THICKNESS VARIATION MAX 0.005 MM ACROSS WIDTH IN A COIL. COIL WEIGHT 8 + - 2 KG.
BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 mmX 1117.6 mm X 0.762 mm + - 0.076 mm THICK (INCLUDING KRAFT LINING) ONE SIDE WHITE IN COLOUR. SPECN. JSS:8135-15:2016 LINING) ONE SIDE WHITE IN COLOUR. SPECN. JSS:8135-15:2016
BOARD CARTON FOR AMMUNITION WITH PURE KRAFT LINING SIZE787.4 MM X 1117.6 MM X 0.762 MM +- 0.076 MM THICK (INCLUDING KRAFT LINING ) SPECN. JSS :8135-15:2016 REV 3KRAFT LINING ) SPECN. JSS :8135-15:2016 REV 3
BOARD CARTON AMMN. SIZE 870 mm X 620 mm X 0.508 mm+- 0.051 MM THICK ( INCLUDING PURE KRAFT LINING ) TO SPECN.JSS 8135-15 : 2010, REV. 2 : DC-4066-MEJSS 8135-15 : 2010, REV. 2 : DC-4066-ME
BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 MMX 558.8 MM X 0.508 MM + - 0.051 MM THICK (INCLUDING KRAFT LINING) TO SPECN : JSS 8135-15 :2010,REV NO.2 DC-4066 MELINING) TO SPECN : JSS 8135-15 :2010,REV NO.2 DC-4066 ME
PAPER WHITE FINE AMMN 762 mm X 508 mm X 0.089 mm +- 0.009 mmTHICK IN SUBSTANCE OF 84 TO 92 GRAMS PER SQUARE METRE TO SPECIFICATION JSS:9310-06:2002 REAFFIRMED 2011 DC: 5044-MESPECIFICATION JSS:9310-06:2002 REAFFIRMED 2011 DC: 5044-ME
PAPER WHITE FINE AMMN. 762 MM X 508 MM X 0.051MM + -0.005MM THICK IN SUBSTANCE OF 42 TO 46 GRAMS PER SQUARE METRE TO SPECIFICATION JSS 9310-06:2002 DC 5044-ME.REAFFIRMED 2011 SPECIFICATION JSS 9310-06:2002 DC 5044-ME.REAFFIRMED 2011
CARTON AND PRINTING DETAILS FOR SA 12 BORE 65 MM SPECIAL CARTGS,TO HOLD 25 CARTGS AS PER AFK DRG NO AFK/SK-028-03, SHEET NO.1,MATERIAL TO SPECN JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
Specification
JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
PAPER FOR GUN CARTG.AMMN.IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115 CORE DIA OF REEL 50MM.IN NATURAL COLOUR TO SPECN. NO.JSS:8135-09:2004 REEL DIA OF REEL 50MM.IN NATURAL COLOUR TO SPECN. NO.JSS:8135-
PAPER FOR GUN CARTG. AMMUNITION.THICKNESS 0.142MM TO 0.162MMWIDTH 387.4MM PAPER TO BE ROLLED IN REELS. PAPER LOADED REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF REEL DIA 457.2MM TO 508MM. CORE DIA OF REEL 50MM BROWN/BUFF NATURAL COLOUR TO SPECIFICATION JSS 8135-09:2016
