ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

SPIRAL TO DRG. NO.bw 8.3.67.009(GSF SK. NO. TF-026) FOR FUZE A 670 M

DRG. NO.bw 8.367.009 FOR FUZE A 670 M(GSF SK. NO. TF-026)

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 4.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 OR JSS-4710-01-GR III IN AS DRAWN CONDN. TWST PIECE OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 4.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 OR JSS-4710-01-GR III IN AS DRAWN CONDN. TWST PIECE OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COPPER TUBE TO SIZE 39.40+0.35 I/DX3.5+0.25 WALL THICKNESS LENGTH OF 1.5 TO 4 MTR

TO SPEC JSS-4710-01 GRADE 4 WITH CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER DRG. NO-M-1895

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

• As per attachment

• As per attachment

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION .

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION . PPGG NOT EXCEEDING 1.5 MM ON RADIUS

AL. ALLOY ROD 65 mm DIA

AL. ALLOY ROD 65 mm DIA TO SPEC IS:733:1983 GR. 24345 IN "W/P" CONDITION. MAT. CLASS B OF IS:3965-1981, PPGG SHALL BE 4 mm MAX IN RADIUS IN STRAIGHT LENGTH 1.5 TO 3 MTRS.

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG.NO. F-2316A SPECN.IS:734 GR.24345 WP OR BS: 1472 GR. 2014 S TF

AS PER DRG. NO. F-2316 A

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER DRG. NO. M-11022 A

AS PER DRG. NO. M-11022 A

FORGING FOR AXLE (SPINDLE) TO DRG NO. 175-45-025/F

FORGING FOR AXLE (SPINDLE) TO DRG NO. 175-45-025/F

175-45-025/F

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

DIE FORGING "CRANK" TO DRG NO. 765-31-50. EQUIVALENT MATERIAL: STEEL 817M40

765-31-50

sdfdsf

fsdfsdf

fsdfds

fsdgfsdgdfg

gdfgdfgdfg

dfsgf

Plastic Liner to GSF SK NO. M-6810/1

Plastic Liner to GSF SK NO. M-6810/1

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GEAR WHEEL (FORGING DRG) FOR COMPONENT NO. 172-45-070-1/F

GEAR WHEEL (FORGING DRG) FOR COMPONENT NO. 172-45-070-1/F

DRG.NO.. 172-45-070-1/F

DRIVEN GEAR (FORGING) DRG.NO. 175-45-007/F

DRIVEN GEAR (FORGING) DRG.NO. 175-45-007/F

DRG.NO. 175-45-007/F

INTERMEDIATE GEAR (FORGING) TO DRG.NO. 175-45-005/F

INTERMEDIATE GEAR (FORGING) TO DRG.NO. 175-45-005/F

DRG.NO. 175-45-005/F

ROUGH MACHINING OF FRONT PART OF BOMB BODY UPTO OPN 15 OF OP SCHEDULE (ITV-31) SHEET NO. 02 OF 06 DTD 12/01/2016 & AS PER ATTACHED SCOPE OF WORK SCOPE OF WORK /ITV-31/1107/16 DATED 12/10/2016

ROUGH MACHINING OF FRONT PART OF BOMB BODY UPTO OPN 15 OF OP SCHEDULE (ITV-31) SHEET NO. 02 OF 06 DTD 12/01/2016 & AS PER ATTACHED SCOPE OF WORK SCOPE OF WORK /ITV-31/1107/16 DATED 12/10/2016

F-9G

OIL SEAL TO DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

OIL SEAL TO DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

DRG. NO.54-83-8 CD DETAILED DRG.NO.54-83-25CD, 54-83-029,54-83-027-1, 54-83-028 (T-38-38)

PIPE TO DRG.NO. 675-38-SB106 SB DETAILED DRG. 675-38-213, 675-38-7

PIPE TO DRG.NO. 675-38-SB106 SB DETAILED DRG. 675-38-213, 675-38-7

DRG.NO. 675-38-SB106 SB

Set of 19 Items for Air Pressure Control Unit to Drg. No. 765-78-CD533, without ADY 2C, as per Enclosure.

Set of 19 Items for Air Pressure Control Unit to Drg. No. 765-78-CD533, without ADY 2C, as per Enclosure.

765-78-CD533

As Per Requirements & Specifications

As Per Requirements & Specifications

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

As per Requirements & Specifications

As per Requirements & Specifications

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

DISC SPACER, DRG/SPEC NO.: OFN/BMCS/M-91/M-92/DISC SPACER

DRG/SPEC NO.: OFN/BMCS/M-91/M-92/DISC SPACER

OFN/BMCS/M-91/M-92/DISC SPACER

Concetrated Nitric Acid, Strength-98% Explosive Grade

Concetrated Nitric Acid, Strength-98% As per IS 264:2005 (Specification of CNA Explosive Grade) All other parameters to be as per (IS 264:2005)

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682- 58101 (PHILIPS / BCESUED) DRG. NO. 1210101

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682- 58101 (PHILIPS / BCESUED) DRG. NO. 1210101

CAPACITOR 10 PF , CERAMIC NPO 100 V MINIATURE CAPACITOR , TYPE : CERAMIC MINIATURE -CLASS -I , NOMINAL CAPACITY : 10 PF, TOLERANCE : +/- 2% PF MAKE :PHILIPS / BCESUD TEMP. COEFF : 750 P.P.M / DEG C NOMINAL VOLTAGE : 100 V CATALOGUE CODE : 2222-682-

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL VOLTAGE : 100 V ( PHILIPS /BCESUD

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL VOLTAGE : 100 V ( PHILIPS /BCESUD

CERAMIC CAPACITOR NPO - 100 PF DRG NO. 1210201 FOR FUZE FB -40 CAPACITOR TYPE : CERAMIC MINIATURE CLASS -I , CAPACITY :100 PF , TOLERANCE +/- 2% PF MAKE : PHILIPS / BCESUD CATALOGUE CODE : 2222 - 682 - 58101 , TEMP. COEFF : 750 P.P.M / DEGC NOMINAL

AMMUNITION CONTAINER BOX M 31-A,PLYWOOD FOR AMMN. CONTAINER ASSY, TO DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A

DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A

DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A

HYDRAULIC COUPLING WITH SHAFT ASSEMBLY TO DRG. NO. 172-47-015CD (FLUID DRIVEN WITH SHAFT)

HYDRAULIC COUPLING WITH SHAFT ASSEMBLY TO DRG. NO. 172-47-015CD (FLUID DRIVEN WITH SHAFT)

172-47-015CD

GEAR (FORGING DRG.) TO DRG NO. 175-45-011/F (WEIGHT = 6.95 Kgs.)

GEAR (FORGING DRG.) TO DRG NO. 175-45-011/F (WEIGHT = 6.95 Kgs.)

175-45-011/F

BRACKET ASSEMBLY TO DRG. NO. 175-45-017CD

BRACKET ASSEMBLY TO DRG. NO. 175-45-017CD

175-45-017CD

RIB ASSEMBLY TO DRG NO. 175-45-019CD

RIB ASSEMBLY TO DRG NO. 175-45-019CD

175-45-019CD

GEAR (FORGING DRG.) TO DRG. NO. 175-45-008/F(WEIGHT = 7.75 Kgs.)

GEAR (FORGING DRG.) TO DRG. NO. 175-45-008/F(WEIGHT = 7.75 Kgs.)

175-45-008/F

GEAR (FORGING DRG.) TO DRG. NO. 175-45-010/F (WEIGHT =6.20 Kgs.)

GEAR (FORGING DRG.) TO DRG. NO. 175-45-010/F (WEIGHT =6.20 Kgs.)

175-45-010/F

PAINT RM MAKING AIR DRYING SEMIGLOSSY FINISH STENCILLING WHITE

PAINT RM MAKING AIR DRYING SEMIGLOSSY FINISH STENCILLING WHITE

READY MIXED PAINT AIR DRYING MATT FINISH FOR GENERAL PURPOSE BLUE(SHADE ISC 102)OF IS 5:1994 WITH AMENDMENT NO.1 TO SPECN IS 168:1993 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE)

IS 168:1993 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE)

READY MIXED PAINT,MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW ISC:356 OF IS:5 TO SPECN IS:138-1992 AS APPLICABLE FOR DEFENCE USE, SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50.

IS:138-1992 AS APPLICABLE FOR DEFENCE USE

PAINT R.F.U. GOLDEN YELLOW AMMN. MAKING(I.S.C.NO.355) BRUSHING, STENCILING,SEMIGLOSSY FINISH

PAINT R.F.U. GOLDEN YELLOW AMMN. MAKING(I.S.C.NO.355) BRUSHING, STENCILING,SEMIGLOSSY FINISH

PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE RED SIGNAL ISC 537 OF IS:5-1994 WITH A.NO.1 SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90.

SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90

PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH SERVICE BR OWN ISC 499 OF IS 5 1978 SPECN. IS: 168-1973

IS: 168-1973

PAINT RM PRIMING RED OXIDE ZINC CHROME AMMUNITION AIRDRYING MATT FINISH BRUSHING/SPRAYING SPECN: JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME

JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME

PAINT PFU FINISHING AM AIR DRYING MATT FINISH BRUSHIN-G SPRA YING DIPPING YELLOW GOLDEN ESC 356 TO SPECN IS S 1000

IS S 1000

PAINT PFU AMMUNITION AIR DRYING BRUSHING SEMI GLOSSY BLACK IS 168-1993(3rd REVISION).

IS 168-1993(3rd REVISION)

PAINT RM MARKING STENCILLING FOR PACKAGES & PETROL CONTAINER S S.G. FINISH GOLDEN YELLOW ISC 356 OF IS:5-1978 TO SPECN. IS:138-1981(AS APPLIACABLE FOR DEFENCE USE) AND CLAUES MENTI ONED IN ATTACHED SCHEDULE MUST FOLLOWED AS PER CQA(ME) LET.N O.CQA/ME/7209/UPS DT. 16/2/89 AND CQA/ME/7209/UPS/2 24/10/90

IS:138-1981(AS APPLIACABLE FOR DEFENCE USE) AND CLAUES MENTI ONED IN ATTACHED SCHEDULE MUST FOLLOWED AS PER CQA(ME) LET.N O.CQA/ME/7209/UPS DT. 16/2/89 AND CQA/ME/7209/UPS/2 24/10/90

PAINT OLIVE GREEN FULL GLOSSY, HARD DRYING, BRUSHING TO SPEC N. IS - 2932 - 1993 WITH AMMENDMENT NO.1 CONFORMING TO COLOUR CODE IS-5-1994 SHADE NO. 278

IS - 2932 - 1993 WITH AMMENDMENT NO.1 CONFORMING TO COLOUR CODE IS-5-1994 SHADE NO. 278

PAINT SYNTHETIC ENAMEL LIGHT GREY AS PER IS 168 : 1993

IS 168 : 1993

PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH FORGENERAL PURPOSES BLACK. SPECN: IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.

IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.

PAINT SYNTHETIC ENAMEL, RED SIGNAL FULL GLOSSY, HARD DRYING, BRUSHING TO SPECN. IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)

IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)

APC NO. 219, DYED ORANGE, TO SPECN NO. JSS: 8010-48:2012 DC 5095-ME REV. 2

JSS: 8010-48:2012 DC 5095-ME REV. 2

AMMN PROTECTIVE COMPOSITION NO 225 TO SPECN. JSS 8010-63 DC 2830 ME.

JSS 8010-63 DC 2830 ME

VARNISH NITROCELLULOSE RD 1198 B.(APC 103) TO SPECN IND/ME/ 368 (C) DC 3117/ME DT.23-2-94.

IND/ME/ 368 (C) DC 3117/ME DT.23-2-94

AMMUNTION PROTECTIVE COMPOSITION NO 10 ( LUTING THIN MK-5 ) SPECN. JSS 8030-15 DC 3745-ME.

JSS 8030-15 DC 3745-ME

AMMUNITION PROTECTIVE COMPOSITION NO 11 /CEMENT RD 1154/ /CA T NO 8030 000 031/ SPECN JSS 8030-24:2011 Rev 2 DC:5086-ME

JSS 8030-24:2011 Rev 2 DC:5086-ME

AMMUNITION PROTECTIVE COMPOSITION NO219/UNDYED/ SPECN:JSS- 8010-48-2012 (revision 2 ) DC 5095-ME.

JSS- 8010-48-2012 (revision 2 ) DC 5095-ME

LACQUER NITROCELLULOSE RD-1198 D ,SUBSTITUTE (AMMUNITION PROTECTIVE COMPOSITION NO. 104) TO SPECN :JSS 8010-45 : 2012 REV 2 DC 5089-ME.

JSS 8010-45 : 2012 REV 2 DC 5089-ME

AMMUNITION PROTECTIVE COMPOSITION NO 218 (PURPLE COLOUR) TO SPECN. JSS 8010-63: 1997 REVISION NO.1, DC 3841-ME.

JSS 8010-63: 1997 REVISION NO.1, DC 3841-ME

APC NO. 224 SPECN: JSS-8010-63:1991 DC 2830-ME

JSS-8010-63:1991 DC 2830-ME

COPPER ALLOY STRIP SIZE 0.56 MM + - 0.010MM THICK X 34.3 MM + - 0.25 MM WIDE,ANNEALED HARDNESS 55 TO 75 HV SPECN. IS 3167 - 1982 (FIRST REVISION).

IS 3167 - 1982 (FIRST REVISION)

COPPER ALLOY STRIP 0.56 MM + - 0.01 MM X 38 MM + - 0.25 MM HARDNESS 55 TO 75 HV TO SPECN IS:3167-1982.( first Rev )

IS:3167-1982.( first Rev )

COPPER ALLOY STRIP 0.7MM+-0.025MM THICK X 44.4MM +-0.25M M WIDE,ANNEALED HARDNESS 55 HV TO 75 HV

COPPER ALLOY STRIP 0.7MM+-0.025MM THICK X 44.4MM +-0.25M M WIDE,ANNEALED HARDNESS 55 HV TO 75 HV

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

SINGLE ROW RADIAL BALL BEARING II3L GOST 8338-75 TO MPF/IGB/8338 EQUIVALENT BEARING SKF6013/M/P6, HMT 6013/FY/-6 AND KNK6013/M/P6

COUPLING (FORGING) TO DRG NO. 172-47-150- I/F (WEIGHT = 2.52 Kgs.)

COUPLING (FORGING) TO DRG NO. 172-47-150- I/F (WEIGHT = 2.52 Kgs.)

172-47-150- I/F

SHAFT (FORGING) TO DRG. NO. 172-45-026/F (WEIGHT = 3.02 Kgs)

SHAFT (FORGING) TO DRG. NO. 172-45-026/F (WEIGHT = 3.02 Kgs)

172-45-026/F

PLUG REAR TO DRG. NO. ITV-52

PLUG REAR TO DRG. NO. ITV-52

ITV-52

FORGING FOR DISC PRESSURE TO DRG.NO 175-47-024/F (WEIGHT = 2.65 Kgs.)

FORGING FOR DISC PRESSURE TO DRG.NO 175-47-024/F (WEIGHT = 2.65 Kgs.)

175-47-024/F