Items open for Registration

Search

Reset
No Advertisement No. Factory Location Items
51841 ADV_651_117 Small Arms Factory The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name Code Quantity Approx Value Select
Axis cylinder DRG. No. MK-III-PH-3-2
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Guide upper left DRG. No. 1005-006836
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Sleeve gas regulator DRG. No. 3120-004755
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Lever Extractor PH-1-7
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin straight headless for extractor DRG. No. SK-2689/71
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Steel Blank for Plunger handle carrying DRG. No. SK-5273
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pawl DRG. No. PHMK-III-1-2
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin grooved headed for trigger & safety sear DRG. No. SK-2689/132
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Screw special DRG. No. 5305-095385
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Stud cocking handle DRG. No. SK-3143/35
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin grooved headed for hammer
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Housing plunger DRG. No. SK-2825/33
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin cocking Handle DRG. no. 5315-009175
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Screw block rear DRG. No. SK-3143/99
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Body foresight DRG. No. 1005-000896
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Rivett solid piece guide DRG. No. SK- 5167C*
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Screw shoulder for lock retainer DRG. No. 5305-017838
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin grooved Headed for Hinge cover DRG. No. SK-3143/29
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Rivett solid for channel Right & Left DRG. No. SK -3543B*
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Catch Trigger DRG. No. PH-MK-III-7-2-ALT
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin cocking handle stud DRG. No. 5315-001764
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Bearing back sight pin DRG. No. 1005-000825
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin straight Headless gas block DRG. No. SK-2689/100
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Rivett Front block and Slide plate DRG. No. SK-876C
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin Straight headless Collar barrel DRG. no. CQA(SA) SK-454/2/2
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Plunger Multi Application(HOD) DRG. No. 1005-007788
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Nut Extractor DRG. No. PH-4-2
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Pin fixing barrel DRG. No. PH-1-9
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Plunger DRG No. 1005-000832
Description
As per Drg.
Specification
As per Drg.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
51842 ADV_478_122 Ordnance Cable Factory Chandigarh The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name Code Quantity Approx Value Select
HOT ROLLED NORMALIZED STEEL WIRE ROD OF ALL TYPES AS PER SPECIFICATION No. BS 970:1983
Description
AS PER SPECIFICATION No. BS 970:1983
Specification
AS PER SPECIFICATION No. BS 970:1983
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
51843 ADV_106_102 Ordnance Equipment Factory The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name Code Quantity Approx Value Select
LATEX FOAM VARIOUS
Description
AS PER REQUIREMENT & SPECIFICATION
Specification
AS PER REQUIREMENT & SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF LINER INNER FOR TEFS 2M UNIT
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF PACK WITH ALUMINIUM FRAME (MODIFIED)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF CAPES W.P. OG/KHAKI
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF BELT ICK BLACK A/F
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF RAIN CAPE MULTIPURPOSE DISRUPTIVE (PONCHO)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF BAG KIT UNIVERSAL WITH PV DOPE DYED FABRIC OG
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF ACCESSARY BAG TO DS CAT NO. M/84600005 WITH ALL FITTINGS
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLY FIXING OPERATION OF BAG KIT UNIVERSAL (NEW PATTERN)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF BAG 3 A/L
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PRESSING PACKING SHORT KHAKI
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF FINISHING OPERATION WITH LEATHER COMPONENTS FOR RUCK SACK LT. WT. ALUMINIUM
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF FABRIC PIECE EMBEDDED WITH NYLON/POLY PROPLINE BEADS FOR BAG CARRING RESCUE
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
EYELETING OPERATION OF TENT 4M OUTER THROUGH TRADE ASSISTANCE
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF SCREEN LATRINE BAG MK-3
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF MATTRESS KAPOK MK-2
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF COVER WATER PROOF 9.1 X 9.1 MTR.
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF ROLL BEDDING
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF SYN. BELT WAIST (ICK)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF GROUND SHEET LT. WT. OG
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF LT. WT. POUCHES BASIC
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF CANOPY BODY (TERPOULIN)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF HAVERSACK ALL RANK
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF BAG KIT UNIVERSAL (NEW PATTERN) A/F
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF SYNTHETIC WEB EQUIPMENT ICK POUCHES AMMUNITION
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF TENT EXTENDABLE FLY OUTER 2M UNIT
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF BAG SLEEPING OFFICER CAMP KIT A/F
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF BAG SLEEPING MK-IV
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF RUCK SECK LT. WT. FOR SKI TROOPS
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF CARRIER MAN PACK
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF TENT ARTIC LARGE
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF BAG CARRYING RESCUE
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF NET MOSQUITO WHITE POLY. F/R A/F
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF SHORT PV DOPE DYED KHAKI
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRADE FABRICATION OF NET MOSQUITO R/M POLY. KHAKI WITH CALICO BORDER
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF TEFS 4M FLY INNER
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF END CURTAIN OF TEFS 4M/2M (ARMY) (EACH SET CONSISTING OF TWO (2) NUMBERS)
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FABRICATION OF TENT FLY OUTER 4M UNIT
Description
AS PER REQUIREMENT & SPECIFICATION 
Specification
AS PER REQUIREMENT & SPECIFICATION 
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
51844 ADV_880_101 Ammunition Factory Khadki The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003
Name Code Quantity Approx Value Select
SQUIB HOLDER - DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3 DT.16.9,2005
Description
DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3
Specification
DRG. NO. AFK/SK - 303-05 SHEET NO. 3/3
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SQUIB ASSEMBLY (EMPTY) TO DRG. NO ERDL 959 DET. 4 DT 14-09-76 FOR PP9 RST
Description
DRG. NO ERDL 959 DET. 4
Specification
DRG. NO ERDL 959 DET. 4
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X
Description
DRG NO. PTA-L-52-01-01-001-X
Specification
DRG NO. PTA-L-52-01-01-001-X
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR BAGLINE CUTTER DRG. NO. PTA-L-53--01-01-001-X
Description
DRG. NO. PTA-L-53--01-01-001-X
Specification
DRG. NO. PTA-L-53--01-01-001-X
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SET OF 7 COMPOENTS FOR PYRO CARTRIDGE PC 100 DRG. NO. ERDL 898
Description
DRG. NO. ERDL 898
Specification
DRG. NO. ERDL 898
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
LUG DRG. NO. AFK/SK - 303-05 SHT. 1 OF 3 DT. 11.11.2005 PART. 4
Description
DRG. NO. AFK/SK - 303-05 SHT. 1 OF 3
Specification
DRG. NO. AFK/SK - 303-05 SHT. 1 OF 3
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
GENERAL ARRANGEMENT FUZE K3M HE/PRACTICE EMPTY ASSEMBLED TO DRG NO. NAI(P) SKETCH - 324
Description
DRG NO. NAI(P) SKETCH - 324
Specification
DRG NO. NAI(P) SKETCH - 324
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
DUMMY - LRCR & MRCR (ASSEMBLED) AS PER DRG NO. NASK 975 (PROV.)
Description
DRG NO. NASK 975 (PROV.)
Specification
DRG NO. NASK 975 (PROV.)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
DETONATOR PLUG DRG.NO.ARM/1138 A2 DT.19/3/96 SPECN: AIR 1296 A
Description
AIR 1296 A
Specification
AIR 1296 A
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CONNECTOR DRG. NO. AFK/SK - 303-05 SHT. 1 OF 3 DT. 11.11.05 PART 3
Description
AFK/SK - 303-05 SHT. 1 OF 3
Specification
AFK/SK - 303-05 SHT. 1 OF 3
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
COMPONENTS FOR SQUIB PSQ-6 CONSISTING 1) HOUSING (2) CERAMIC BASE (3) SLEEVE
Description
DRG.NO. (1) PTA-L-54-01-01-102-X
Specification
DRG.NO. (1) PTA-L-54-01-01-102-X
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SET OF COMPONENTS FOR 40 MM MGL/UBGL AMMN. (1) CASE (2) BASE PLUG (3) INSERT (4) SKIRT (5) CUP
Description
AS PER AFK SPECN. & DRGS
Specification
AS PER AFK SPECN. & DRGS
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Proceed