SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

DRG.NO. TRD-2-2-2271

DRG.NO. TRD-2-2-2271

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540

BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

• as per file attached

• as per file attached

DRG. NO. TRD 2-2-2203

DRG. NO. TRD 2-2-2203

BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278

BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

• attached

• attached

SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PB & CONSISTING OF 29 COMPONENTS AND TO ARDE SPECIFICATION NO.ARDE/SPECN/668 DATE DEC 2007 REV.2 DT.DEC.2010 FOR PRE-FRAG 100-120KG.

SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PB & CONSISTING OF 29 COMPONENTS AND TO ARDE SPECIFICATION NO.ARDE/SPECN/668 DATE DEC 2007 REV.2 DT.DEC.2010 FOR PRE-FRAG 100-120KG.

SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01

SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

CARTG. PERCN. SECONDARY ASSY TO DRG.NO. 0110 00 00 00 00 R.NO. 1 DT. 07/11/90 SPECN. ARDE/SPECN./380

CARTG. PERCN. SECONDARY ASSY TO DRG.NO. 0110 00 00 00 00 R.NO. 1 DT. 07/11/90 SPECN. ARDE/SPECN./380

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87

BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87

CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP

CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)

ALUMINIUM(DISC) COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.

ALUMINIUM(DISC) COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99

84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99

WARHEAD BODY ASSEMBLY TO DRG.NO. 3074 310

WARHEAD BODY ASSEMBLY TO DRG.NO. 3074 310

TAIL UNIT ASY 5216051 FOR HEAT-551

TAIL UNIT ASY 5216051 FOR HEAT-551

DRG.NO. TRD-2-2-2272

DRG.NO. TRD-2-2-2272

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

• uploaded soon

• uploaded soon

DRG.NO. 301100269

DRG.NO. 301100269

DRG.NO. TRD-2-2-2273

DRG.NO. TRD-2-2-2273

DRG.NO. TRD-1-2-2265

DRG.NO. TRD-1-2-2265

BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540

BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

DRG.NO. 6417 888/DRG.NO.TRD-1-2-2293

DRG.NO. 6417 888/DRG.NO.TRD-1-2-2293

DRG NO.TRD 1-2-2279

DRG NO.TRD 1-2-2279

DRG NO.TRD-2-2-2271

DRG NO.TRD-2-2-2271

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

CARTG. PERCN. PRIMARY (EMPTY) ASSY TO DRG. NO. 0112 00 00 00 00 R.NO. 2 DT. 15/6/96 SPECN. ARDE/SPECN./380

CARTG. PERCN. PRIMARY (EMPTY) ASSY TO DRG. NO. 0112 00 00 00 00 R.NO. 2 DT. 15/6/96 SPECN. ARDE/SPECN./380

CARTG. PERCN. SECONDARY ASSY TO DRG.NO. 0110 00 00 00 00 R.NO. 1 DT. 07/11/90 SPECN. ARDE/SPECN./380

CARTG. PERCN. SECONDARY ASSY TO DRG.NO. 0110 00 00 00 00 R.NO. 1 DT. 07/11/90 SPECN. ARDE/SPECN./380

DRG.NO. TRD-3-2-1877

DRG.NO. TRD-3-2-1877

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

JSS-9535-02:-2008 REV. 3

JSS-9535-02:-2008 REV. 3

CQA (A) 2348

CQA (A) 2348

DRG. NO. 04-749-130222-03.2E

DRG. NO. 04-749-130222-03.2E

CQA(A) 2324

CQA(A) 2324

CQA(A) 1804

CQA(A) 1804

DRG.NO. AFK/SK-215-05. dt. 13.09.2011

DRG.NO. AFK/SK-215-05. dt. 13.09.2011

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87

BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)

DRG.NO. F1334-154820 B DC-35529-A DT. 14/08/93

DRG.NO. F1334-154820 B DC-35529-A DT. 14/08/93

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

TAIL UNIT ASY 5216051 FOR HEAT-551

TAIL UNIT ASY 5216051 FOR HEAT-551

DRG.NO. 301100269

DRG.NO. 301100269

DRG.NO. TRD-1-2-2265

DRG.NO. TRD-1-2-2265

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

DRG.NO. TRD-1-2-2239

DRG.NO. TRD-1-2-2239

DRG.NO. TRD-1-2-2279

DRG.NO. TRD-1-2-2279

DRG.NO. TRD-1-2-2269

DRG.NO. TRD-1-2-2269

SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01

SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01

30MM ADEN SHELL (PRACTICE)TO DRG.NO.D6(L)1342/G ISSUE-8 DATE08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRINGDETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO.Kh2635.2.COPPER DRIVING BAND TO DRG.NO.TRD-122338.3.PLUG FIRING TO DRG.NO.D6(L) 1338 ISSUE -13 DATE 08/03.

30MM ADEN SHELL (PRACTICE)TO DRG.NO.D6(L)1342/G ISSUE-8 DATE08/03 WITH COPPER DRIVING BAND ASSEMBLED WITH PLUG FIRINGDETAILS AS UNDER 1. EMPTY SHELL TO DRG.NO.Kh2635.2.COPPER DRIVING BAND TO DRG.NO.TRD-122338.3.PLUG FIRING TO DRG.NO.D6(L) 1338 ISSUE -13 DATE 08/03.

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

CARTG PP-3 EOFE EMPTY (ASSY) TO DRG. NO. TRD/1279

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6

DRG NO F-1301-026222-H DC NO. 37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

DRG NO F-1301-026222-H DC NO. 37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99

DRG.NO. 5209565/DRG.NO. TRD-2-2-2247

DRG.NO. 5209565/DRG.NO. TRD-2-2-2247

BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278

BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

DRG.NO. 4103408/DRG.NO. TRD-2-2-2294

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG. LIST NO. ARM-1253 NO. OF SHEETS-3, SHEET-1 R.NO. 9 DT. 7/03/02 SHEET-2 R.NO. 5 DT. 31/07/96 SHEET-3 R.NO. NIL DT. 2/3/98 TO DRG.NO. ARM-1253-D1 (WITHOUT FITMENTS) R.NO. 6 DT. 27/06/96 SPECN: IA-1169 (n) DC-35576-A AIDE MEMOIRE-P/11

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG. LIST NO. ARM-1253 NO. OF SHEETS-3, SHEET-1 R.NO. 9 DT. 7/03/02 SHEET-2 R.NO. 5 DT. 31/07/96 SHEET-3 R.NO. NIL DT. 2/3/98 TO DRG.NO. ARM-1253-D1 (WITHOUT FITMENTS) R.NO. 6 DT. 27/06/96 SPECN: IA-1169 (n) DC-35576-A AIDE MEMOIRE-P/11

DRG.NO. ARM-1513 D1 R.NO. 1 DT. 26/4/04 SPECN: IA-1169 (n) DC-35576-A, AIDE MEMOIRE-P/11

DRG.NO. ARM-1513 D1 R.NO. 1 DT. 26/4/04 SPECN: IA-1169 (n) DC-35576-A, AIDE MEMOIRE-P/11

DRG.NO. 6417 888/DRG.NO.TRD-1-2-2293

DRG.NO. 6417 888/DRG.NO.TRD-1-2-2293

DRG.NO. TRD-1-2-2246

DRG.NO. TRD-1-2-2246

DRG.NO. ARDE-2184 DET-3 (MATERIAL RUBBER EXPANDED TO SPECN: IND/ME/677 (a) GRADE-I MEDIUM DENSITY) DC NO. 2377-ME DT. 05/02/81

DRG.NO. ARDE-2184 DET-3 (MATERIAL RUBBER EXPANDED TO SPECN: IND/ME/677 (a) GRADE-I MEDIUM DENSITY) DC NO. 2377-ME DT. 05/02/81

DRG.NO. ARDE-2184 DET-3 (MATERIAL RUBBER EXPANDED TO SPECN: IND/ME/677 (a) GRADE-I MEDIUM DENSITY) DC NO. 2377-ME DT. 05/02/81

DRG.NO. ARDE-2184 DET-3 (MATERIAL RUBBER EXPANDED TO SPECN: IND/ME/677 (a) GRADE-I MEDIUM DENSITY) DC NO. 2377-ME DT. 05/02/81

CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max)

TO BOFORS SPECN:BMK-07-G-55.CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES OFCUPRO NICKEL TUBING ARE FOLLOWS: CHEMICAL COMPOSITION:Cu-92.5 TO 94.5%, Mn-0.5% Max.Ni-5 TO 7% REMAINDER MAX 0.5%.PHYSICAL PROPERTIES: TENSILE STRENGTH-235.36 Mpa Min.ALONGATION (10xd)-30% Min.

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

AS PER OFM SPECIFICATION

AS PER OFM SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.