MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

54881

ADV_19_121

Ordnance Factory Bhandara

The Cheif General Manager OFB
Bhandara
Bhandara
Maharashtra
441906

Name	Code	Quantity	Approx Value	Select
BAG COTTON CALICO BLEACHED FOR NCP 50 KG Description Drg No.OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS: 5088-1982(FIRST REVISION) REAFFIRMED 2001 WITH AMENDMENT 1 OF MAY 1985 & AMENDMENT2 Specification Drg No.OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS: 5088-1982(FIRST REVISION) REAFFIRMED 2001 WITH AMENDMENT 1 OF MAY 1985 & AMENDMENT2 Drawing no. Manufacturing Technology Testing / Inspection Facility
BAG COTTON TNT 25 KG Description DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Specification DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Drawing no. Manufacturing Technology Testing / Inspection Facility

54882

ADV_4_108

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Fabric Nylon Low Porosity 52 Gm ODS with 94 cm Description IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded. Specification IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded. Drawing no. Manufacturing Technology Testing / Inspection Facility
Cloth Calico Cotton OG 91.5 Cm Description IS:1544-1973, (Ist Revision ) Reaffirmed 2007 with Amendment No.3 Specification IS:1544-1973, (Ist Revision ) Reaffirmed 2007 with Amendment No.3 Drawing no. Manufacturing Technology Testing / Inspection Facility
Cloth Cotton Calico White (Bld.) wide 91 cm. minimum Description IS:1544-1973( First Revision Reaffirmed 2007 AMDT:3) Specification IS:1544-1973( First Revision Reaffirmed 2007 AMDT:3) Drawing no. Manufacturing Technology Testing / Inspection Facility
Cloth Cotton Calico Khaki 91.5 cm Description IS:1544-1973( First Revision Reaffirmed 2002 Addition 2.3 1993 -02 except that scouring loss when tested as per IS:1383-1977. Mild method should be 2% Max Specification IS:1544-1973( First Revision Reaffirmed 2002 Addition 2.3 1993 -02 except that scouring loss when tested as per IS:1383-1977. Mild method should be 2% Max Drawing no. Manufacturing Technology Testing / Inspection Facility
Cloth Plain Weave Polyester & Viscose Dope Dyed Darker OG 150 cm Minimum Description IND/TC/0048(c) Except shade (Shade sample as Received from OPF Kanpur). Specification IND/TC/0048(c) Except shade (Shade sample as Received from OPF Kanpur). Drawing no. Manufacturing Technology Testing / Inspection Facility
Serge Battle Dress PolyWool 142 cms Minimum Width Description S/5432/PW/TC-19 (a), Min Width 142cms required to be Water repellant & should conform to standard/values laid Down in R/O the bundesmann test as mentioned in Clause 6.1 (q) of above specification. Testing of % composition of Wool & polyester should be done as per IS:2006-1988 2nd Revision Amendment No.1 &the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification. Specification S/5432/PW/TC-19 (a), Min Width 142cms required to be Water repellant & should conform to standard/values laid Down in R/O the bundesmann test as mentioned in Clause 6.1 (q) of above specification. Testing of % composition of Wool & polyester should be done as per IS:2006-1988 2nd Revision Amendment No.1 &the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification. Drawing no. Manufacturing Technology Testing / Inspection Facility
Fabric Cotton C/W 170 Gram OG WR 91 cm Description JSS:8305-5,2008 (rev no.02) variety a except that In appearance, shade, finish and in other respect not defined in JSS standard, the material shall conform to the sealed pattern held in the custody of CQA(T&C),KANPUR/GM OCFS. Specification JSS:8305-5,2008 (rev no.02) variety a except that In appearance, shade, finish and in other respect not defined in JSS standard, the material shall conform to the sealed pattern held in the custody of CQA(T&C),KANPUR/GM OCFS. Drawing no. Manufacturing Technology Testing / Inspection Facility
BAG COTTON TNT 25 KG Description DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Specification DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Drawing no. Manufacturing Technology Testing / Inspection Facility
BAG COTTON TNT 25 KG Description DRG. NO. O.F.BA/RX/243 AMMENDED ON 07.11.02 Specification DRG. NO. O.F.BA/RX/243 AMMENDED ON 07.11.02 Drawing no. Manufacturing Technology Testing / Inspection Facility

54883

ADV_880_101

Ammunition Factory Khadki

The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003

Name	Code	Quantity	Approx Value	Select
HALF CUP TO DESIGNERS REF. NO. CIA/AMN/2158 PT. NO. ISV 1740 Description DRG. NO. CIA/AMN/2158 PT. NO. ISV 1740 Specification DRG. NO. CIA/AMN/2158 PT. NO. ISV 1740 Drawing no. Manufacturing Technology Testing / Inspection Facility
BAG 3 A/L CANVAS FOR AMMN. CONTAINER ASSEMBLY 148A TO DRG. NO. ARDE-2125 DET1 PT. NO.ISV 532A Description DRG. NO. ARDE-2125 DET1 PT. NO.ISV 532A Specification DRG. NO. ARDE-2125 DET1 PT. NO.ISV 532A Drawing no. Manufacturing Technology Testing / Inspection Facility
AMMUNITION CONTAINER 69 A/L PLASTIC TO DRG. NO. ARDE 2125, PT. NO. ISV 533A SPECN. CQA(A) 2804 Description CQA(A) 2804 Specification CQA(A) 2804 Drawing no. Manufacturing Technology Testing / Inspection Facility
CARRIER AMMUNITION 10 C, DESIGNERS REF CIA/AMN/2317 PT. NO. ISV 495A, SPECN. CQA(A)2804 Description CQA(A)2804 Specification CQA(A)2804 Drawing no. Manufacturing Technology Testing / Inspection Facility
SEPARATORS (FOR CARTON 23A FOR PACKING 9MM) DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA Description DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA Specification DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX PACKING (ALT) CORRUGATED FIBRE BOARD FOR CARTG. SA 12 BORE TO DRG. NO. AFK/SK-2582 SHT. 1 Description DRG. NO. AFK/SK-2582 SHT. 1 Specification DRG. NO. AFK/SK-2582 SHT. 1 Drawing no. Manufacturing Technology Testing / Inspection Facility
Fabric Nylon, Knitted, Aluminised Coated, 100 cm (Min.) Description Schedule no. DMSRDE/Tex-2/93/2 & Annexure 'A' Attached Specification Schedule no. DMSRDE/Tex-2/93/2 & Annexure 'A' Attached Drawing no. Manufacturing Technology Testing / Inspection Facility

54884

ADV_115_123

Ordnance Factory Dumdum

The General Manager,
Dum Dum
Dum Dum
Kolkata, West Bengal
700028

Name	Code	Quantity	Approx Value	Select
CONE RING ASSY FOR BTU -250 IN F.C Description OFDC SK NO.-2420 Specification OFDC SK NO.-2420 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONE RING FOR BTU 1111 Description DRG.NO.ARDE-2139 DET NO.6 SHT NO-02 Specification DRG.NO.ARDE-2139 DET NO.6 SHT NO-02 Drawing no. Manufacturing Technology Testing / Inspection Facility

54885

ADV_44_113

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity	Approx Value	Select
SEALING RING TO DRG.NO.TRD-1-2-2246 (9911357874) Description DRG.NO. TRD-1-2-2246 Specification DRG.NO. TRD-1-2-2246 Drawing no. Manufacturing Technology Testing / Inspection Facility
RIVET 2X10 TO DRG.NO.TRD-1-2-2239. (9911357870) Description DRG.NO. TRD-1-2-2239 Specification DRG.NO. TRD-1-2-2239 Drawing no. Manufacturing Technology Testing / Inspection Facility
SLEEVE ADAPTER TX 589 (6430101200) Description SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01 Specification SLEEVE TO DRG. PT. NO. TX-589 DC NO 36775-A DT 18/8/01 Drawing no. Manufacturing Technology Testing / Inspection Facility
CAPSULES DRG NO IQX-514(EMPTY) (9911356426) Description DRG PT. NO. IQX-514 DC 36852-A DATE 23/09/02. Specification DRG PT. NO. IQX-514 DC 36852-A DATE 23/09/02. Drawing no. Manufacturing Technology Testing / Inspection Facility
PRF FOR 30MM AK-630 PRACTICE NAVAL AMMN. (9911358280) Description PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. Specification PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. Drawing no. Manufacturing Technology Testing / Inspection Facility
PROJECTILE TPT FFV-651 W/O TRACER (9911332884) Description 84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99 Specification 84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99 Drawing no. Manufacturing Technology Testing / Inspection Facility
STABILIZING TUBE F1301-026223-D (9911334347) Description DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78. Specification DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78. Drawing no. Manufacturing Technology Testing / Inspection Facility
ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765) Description AS PER SPECIFIED DRGS. Specification AS PER SPECIFIED DRGS. Drawing no. Manufacturing Technology Testing / Inspection Facility
BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970) Description BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87 Specification BODY ASSY TO DRG.NO. 4-26941-060Cb DC 34269-A DT. 17/11/87 Drawing no. Manufacturing Technology Testing / Inspection Facility
SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600) Description SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L) Specification SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L) Drawing no. Manufacturing Technology Testing / Inspection Facility
TRACER BODY DRG NO.F1334-154780-D (9911334357) Description TRACER BODY TO DRG NO.F1334-154780-D Specification TRACER BODY TO DRG NO.F1334-154780-D Drawing no. Manufacturing Technology Testing / Inspection Facility
BRASS STRIP AND COPPER STRIP Description AS PER OFDC SPECIFICATION Specification AS PER OFDC SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
PRF FOR 30MM AK-630 PRACTICE NAVAL AMMN. (9911358280) Description PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. Specification PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032) Description STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 X m10 TO SPECN: TY-14-1-2232-77 Specification STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 X m10 TO SPECN: TY-14-1-2232-77 Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL ROD 41MM FOR MFG. OF SHELL BODY FOR 40MM L/70 (0113000041) Description STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013 (REV.NO.3) DESIG SS/C24-A Specification STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013 (REV.NO.3) DESIG SS/C24-A Drawing no. Manufacturing Technology Testing / Inspection Facility
PROJECTILE TPT FFV-651 W/O TRACER (9911332884) Description 84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99 Specification 84MM TPT PROJECTILE FFV-651 (W/O TRACER 56 D) TO DRG.NO. F1301-047300 R DC NO. 36598-A DT. 23/09/99 Drawing no. Manufacturing Technology Testing / Inspection Facility
SUPPORTING RING REAR TU 1111 Description DRG NO ARDE - 2139, DET NO.8 Specification DRG NO ARDE - 2139, DET NO.8 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONE RING ASSY FOR BTU 250 IN FC Description DRG.NO OFDC SH-2420 Specification DRG.NO OFDC SH-2420 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONE RING FOR TU 1111 Description DRG.NO.ARDE - 2139, DET NO.6, SH-2 Specification DRG.NO.ARDE - 2139, DET NO.6, SH-2 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONE RING ASSY FOR BTU-250 IN F.C Description OFDC SK-2420 Specification OFDC SK-2420 Drawing no. Manufacturing Technology Testing / Inspection Facility
CONE RING FOR BTU 1111 Description DRG.NO.ARDE 2139 , DET NO.6 SHEET NO.2 Specification DRG.NO.ARDE 2139 , DET NO.6 SHEET NO.2 Drawing no. Manufacturing Technology Testing / Inspection Facility
STRIKER SPRING Description DRG.PT.NO. ITW-68 DC 36416-A DT. 7/5/98 Specification DRG.PT.NO. ITW-68 DC 36416-A DT. 7/5/98 Drawing no. Manufacturing Technology Testing / Inspection Facility
RUBBER GASKET Description DRG.NO. ARDE-2030 Specification DRG.NO. ARDE-2030 Drawing no. Manufacturing Technology Testing / Inspection Facility
RIVET MS FLAT HD Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
RING ARMING Description IA-780k (bo) DC 35369-A DT. 22/8/92 DRG.PT.NO. ITW-51 DC(I) 35369-A DT. 22/8/92 Specification IA-780k (bo) DC 35369-A DT. 22/8/92 DRG.PT.NO. ITW-51 DC(I) 35369-A DT. 22/8/92 Drawing no. Manufacturing Technology Testing / Inspection Facility
RETAINING PIN & RING Description DRG.NO. ITW-105A Specification DRG.NO. ITW-105A Drawing no. Manufacturing Technology Testing / Inspection Facility
PRIMER GUV-7 COMPONENTS LIST ATTCH Description DRG.NO. 3-027321 AND ALL COMPONENTS DRG. Specification DRG.NO. 3-027321 AND ALL COMPONENTS DRG. Drawing no. Manufacturing Technology Testing / Inspection Facility
LINK ADJUSTABLE DEMOLITION NACKLACE Description CQA 0514 (a) DC NO. 36863-A DT. 14/11/02 DRG.PT.NO. TX-20-A DT. 21/2/87 Specification CQA 0514 (a) DC NO. 36863-A DT. 14/11/02 DRG.PT.NO. TX-20-A DT. 21/2/87 Drawing no. Manufacturing Technology Testing / Inspection Facility
KEY AMMUNITION Description DRG.NO. IUX-96A Specification DRG.NO. IUX-96A Drawing no. Manufacturing Technology Testing / Inspection Facility
DIAPHRAGM Description DRG.NO. KHRD-2/7 (20 MM ARM) Specification DRG.NO. KHRD-2/7 (20 MM ARM) Drawing no. Manufacturing Technology Testing / Inspection Facility
CAP Description DRG.NO. US-93212002 Specification DRG.NO. US-93212002 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLIP Description DRG.NO. TX-304 Specification DRG.NO. TX-304 Drawing no. Manufacturing Technology Testing / Inspection Facility
CLAMP DEMOLITION NACKLACE Description CQA 0514(a) DC NO. 36863-A DT. 14/11/2 DRG.PT. NO. TX-19-A DT. 9/2/87 Specification CQA 0514(a) DC NO. 36863-A DT. 14/11/2 DRG.PT. NO. TX-19-A DT. 9/2/87 Drawing no. Manufacturing Technology Testing / Inspection Facility
CHARGER 0. 303 CARTG. MK4/LNA (SERV) Description DESIGNERS REF. I.T.W. 4086 Specification DESIGNERS REF. I.T.W. 4086 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX ASSY (EMPTY) Description DRG NO. NAI (MB)-9154 (PROV) FOR 30MM CARTG. AK-630 PRACTICE AND TRACER AMMN. SPECN: IA-1169(n) DC 35576-A DT. 8 SEPT. 93 AIDE MEMOIRE P/11 Specification DRG NO. NAI (MB)-9154 (PROV) FOR 30MM CARTG. AK-630 PRACTICE AND TRACER AMMN. SPECN: IA-1169(n) DC 35576-A DT. 8 SEPT. 93 AIDE MEMOIRE P/11 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX M-104 MK-1 STEEL DD(L) 11325 (6570530000) Description DESIG REF. DD(L) 11325, SHT-1 DRG.PART NO. SV-22-A DC NO. 35994-A DT. 12/08/95 Specification DESIG REF. DD(L) 11325, SHT-1 DRG.PART NO. SV-22-A DC NO. 35994-A DT. 12/08/95 Drawing no. Manufacturing Technology Testing / Inspection Facility

54886

ADV_658_135

Engine Factory Avadi

Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
AIR INTAKE HEATING UNIT Description SB 345-00-4 Specification SB 345-00-4 Drawing no. Manufacturing Technology Testing / Inspection Facility
OIL PUMP ASSY Description SB 20-12-00-13 Specification SB 20-12-00-13 Drawing no. Manufacturing Technology Testing / Inspection Facility
MIDDLE PACKING PIECE EXPAND. POLYST. FOAM TYPE-2 130X120X6MM THICK, AVG. DENSITY 15TO 20 kg/m3 Description IS :4671-984 (FIRST REVISION) Specification IS :4671-984 (FIRST REVISION) Drawing no. Manufacturing Technology Testing / Inspection Facility

54887

ADV_361_134

High Energy Projectile Factory

The Cheif General Manager
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
STEEL ROD DIA 20 MM TO 200 MM (ROUND DIA) IN HOT ROLLED AND PEELED (BRIGHT BAR) CONDITION ONLY Description ASTM/BS/GOST/IS/EN/SE/DIN/SS/ALLOY STEEL Specification ASTM/BS/GOST/IS/EN/SE/DIN/SS/ALLOY STEEL Drawing no. Manufacturing Technology Testing / Inspection Facility
TUNGSTEN ALLOY 2.8 MM PRE - FRAGMENTS Description ARDE/SPECN/PNWH/MAT/TAP Specification ARDE/SPECN/PNWH/MAT/TAP Drawing no. Manufacturing Technology Testing / Inspection Facility

54888

ADV_377_130

Ordnance Equipment Factory Hazaratpur

The General Manager,
Hazratpur
Hazratpur
Uttar Pradesh
283103

Name	Code	Quantity	Approx Value	Select
PLY WOOD BOARD VARIOUS SIZES Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

54889

ADV_453_115

Ordnance Factory Muradnagar

The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206

Name	Code	Quantity	Approx Value	Select
T.A. PIN BLANK Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
T.A. PIN Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
CONTAINER EXPLODER Description AS PER OFM SPECIFICATION Specification AS PER OFM SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL RODS (180 TO 260 MM) FORGED & MACHINED Description IS 7226 - 74 GRADE C40/ EN-8/ASTM 106/BS 970 GRADE 80M40 Specification IS 7226 - 74 GRADE C40/ EN-8/ASTM 106/BS 970 GRADE 80M40 Drawing no. Manufacturing Technology Testing / Inspection Facility
Batting Polyester 100 Gsm 150 cm Wide (As Sole Selling Agent of M/s Venus Interlinings (P) Ltd, Jaip Description As per appendix b of prov.specification no.IND/TC/4587(c) except thickness parameter (sl.no.3.1,at point 5) shall be 5 mm(minimum) confirmed vide cqa(t&c) kanpur fax no.S/3558/A/TC-15 dated 28/5/2014. Specification As per appendix b of prov.specification no.IND/TC/4587(c) except thickness parameter (sl.no.3.1,at point 5) shall be 5 mm(minimum) confirmed vide cqa(t&c) kanpur fax no.S/3558/A/TC-15 dated 28/5/2014. Drawing no. Manufacturing Technology Testing / Inspection Facility
STEEL TUBE OD 65 MM TO 263 MM AND ID 51 TO 231 MM Description ASTM A 519-03/GRADE SAE 4135/4140 Specification ASTM A 519-03/GRADE SAE 4135/4140 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX PACKING CORRUGATED BOARD FOR 8 MM/.315 INCH BALL WITH PRINTING TO DRG. NO. AFK/SK-244-05 Description DRG. NO. AFK/SK-244-05 Specification DRG. NO. AFK/SK-244-05 Drawing no. Manufacturing Technology Testing / Inspection Facility
BOX PACKING (ALT) CORRUGATED FIBRE BOARD FOR SA 12 BORE TO DRG NO AFK/SK-2582 SHEET NO 1 Description DRG NO AFK/SK-2582 SHEET NO 1 Specification DRG NO AFK/SK-2582 SHEET NO 1 Drawing no. Manufacturing Technology Testing / Inspection Facility
SQUIB PLUG(BRIDGED) DRG.NO. ERDL 1296 DET 1 DT.10-5-93. Description DRG.NO. ERDL 1296 DET 1 DT.10-5-93. Specification DRG.NO. ERDL 1296 DET 1 DT.10-5-93. Drawing no. Manufacturing Technology Testing / Inspection Facility
GENERAL ARRANGEMENT FUZE K3M HE/PRACTICE EMPTY ASSEMBLED TO DRG NO. NAI(P) SKETCH - 324 Description DRG NO. NAI(P) SKETCH - 324 Specification DRG NO. NAI(P) SKETCH - 324 Drawing no. Manufacturing Technology Testing / Inspection Facility

54890

ADV_147_111

Ordnance Factory Ambernath

The Sr.General Manager,
Ambarnath
Ambarnath
Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
Oil Products (such as Roll Coolant Oil, High Speed Diesel Oil, Petrol / Motor Gasolene etc). Description As per requirement / Specification Specification As per requirement / Specification Drawing no. Manufacturing Technology Testing / Inspection Facility
Oil Products (such as Roll Coolant Oil, High Speed Diesel Oil, Petrol / Motor Gasolene etc). Description As per our requirment / Specification. Specification As per our requirment / Specification. Drawing no. Manufacturing Technology Testing / Inspection Facility
Oil Products (such as Roll Coolant Oil, High Speed Diesel Oil, Petrol / Motor Gasolene etc). Description As per our requirment / Specification. Specification As per our requirment / Specification. Drawing no. Manufacturing Technology Testing / Inspection Facility

54891

ADV_417_107

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MAGAZINE BOX AK- 630M ASSY.01 Description AS PER DRG.& SPECIFICATION Specification AS PER DRG.& SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

54892

ADV_381_116

Ordnance Factory Kanpur

The Sr.General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Graphite Tube for Throat Insert Description Drg. No. SK-8738/E Specification Drg. No. SK-8738/E Drawing no. Manufacturing Technology Testing / Inspection Facility

54893

ADV_294_119

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
MANDREL ASSY Description VMT-SK-119-10000-11 Specification VMT-SK-119-10000-11 Drawing no. Manufacturing Technology Testing / Inspection Facility
MANDREL ASSY Description VMT-SK-119-10000-11 Specification VMT-SK-119-10000-11 Drawing no. Manufacturing Technology Testing / Inspection Facility

54894

ADV_568_105

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
SPRING BOLT LOCKING FOR 0.315Ã¢â‚¬Â SPORTING RIFLE. Description AS PER DRAWING Specification AS PER DRAWING Drawing no. Manufacturing Technology Testing / Inspection Facility

Proceed