AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

DRG. NO. IND/GS/1427(d) (686/PK)

DRG. NO. IND/GS/1427(d) (686/PK)

CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986

CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986

IS:2016 TYPE A

IS:2016 TYPE A

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

DRG.NO. iIM-0651 (7792/PK DT. 07.04.2000)

DRG.NO. iIM-0651 (7792/PK DT. 07.04.2000)

DRG. NO. 7792/PK DT. 07.4.2000

DRG. NO. 7792/PK DT. 07.4.2000

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

DMSRDE/T&GS/85/325 (b) PLATE 8

DMSRDE/T&GS/85/325 (b) PLATE 8

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

Drawing as per matl.3 of drawing no. SK-1197

Drawing as per matl.3 of drawing no. SK-1197

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

DRG. NO. AFK/SK-2675 SHT. NO. 1

DRG. NO. AFK/SK-2675 SHT. NO. 1

IA 948

IA 948

CQA(A) DRG. NO. 04-44-79000-06131-3 (AFK/SK - 2223)

CQA(A) DRG. NO. 04-44-79000-06131-3 (AFK/SK - 2223)

CQA(A) DRG NO 04-44-79000-06131-3

CQA(A) DRG NO 04-44-79000-06131-3

IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6

IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6

NOSE FUZE TYPE A-670M ASSEMBLY DRAWING (FILLED) TO DRG.NO. БѠ-3.140.039 CБІc DC NO. 34241-A Dt. 24/09/87 (2SHT) PROGRAME & TESTS PROCEDURE AS PER ALBUM NO. D2040 SHEET NO. БѠ-3.140.039 тт M/C (12SHTS) DC-34241-A Dt. 24/09/87 FOR 30MM BMP-II HE/I AMMN.

NOSE FUZE TYPE A-670M ASSEMBLY DRAWING (FILLED) TO DRG.NO. БѠ-3.140.039 CБІc DC NO. 34241-A Dt. 24/09/87 (2SHT) PROGRAME & TESTS PROCEDURE AS PER ALBUM NO. D2040 SHEET NO. БѠ-3.140.039 тт M/C (12SHTS) DC-34241-A Dt. 24/09/87 FOR 30MM BMP-II HE/I AMMN.

NOSE FUZE TYPE A-670M ASSEMBLY DRAWING (FILLED) TO DRG.NO. БѠ-3.140.039 CБІc DC NO. 34241-A Dt. 24/09/87 (2SHT) PROGRAME & TESTS PROCEDURE AS PER ALBUM NO. D2040 SHEET NO. БѠ-3.140.039 тт M/C (12SHTS) DC-34241-A Dt. 24/0

• FUZE A670 M (FILLED) EX-IMPORT (LF-6013620059) 1. CNC lathe Machine (multi spindle) 2. Press M/c 3. Steel ball manufacturing facility 4. Spiral spring manufacturing facility 5. Spring coiling M/c 6. Plastic moulding facility 7. Paper cutting facility 8. Heat treatment facility 9. Surface coating facility 10. Spinning test facility 11.Explosive filling facility 12. Other relevant Inspection & testing facility

• FUZE A670 M (FILLED) EX-IMPORT (LF-6013620059) 1. CNC lathe Machine (multi spindle) 2. Press M/c 3. Steel ball manufacturing facility 4. Spiral spring manufacturing facility 5. Spring coiling M/c 6. Plastic moulding facility 7. Paper cutting facility 8. Heat treatment facility 9. Surface coating facility 10. Spinning test facility 11.Explosive filling facility 12. Other relevant Inspection & testing facility

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRG. SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRG. SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER REQUIRE OFBH SPECN. & DRG.

AS PER REQUIRE OFBH SPECN. & DRG.

BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M

BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

• as per file attached

• as per file attached

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.) GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN. ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C B IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.) GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN. ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C B IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 | 1986|CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 | 1986|CZ-114 M OR CZ 122M.

SPECN: BMK-07-G-55

SPECN: BMK-07-G-55

BRASS TUBE 14.20 +0.1 O/D X 10.80 MM ID X240 MM LONG. DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN |BS|2871(1972) PART.II- INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE 14.20 +0.1 O/D X 10.80 MM ID X240 MM LONG. DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN |BS|2871(1972) PART.II- INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3) MM LONG IS-407-1981 (THIRD REV.) (REAFFIRMED 2006) GRD.CU Zn 30AS TA COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3) MM LONG IS-407-1981 (THIRD REV.) (REAFFIRMED 2006) GRD.CU Zn 30AS TA COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB

TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS RELIEVED)

TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS RELIEVED)

• as per file attached

• as per file attached

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883 (F) (PROV) 1998 DC NO. 3539 ME DE 24/10/98

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883 (F) (PROV) 1998 DC NO. 3539 ME DE 24/10/98

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883 (F) (PROV) 1998 DC NO. 3539 ME DE 24/10/98

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883 (F) (PROV) 1998 DC NO. 3539 ME DE 24/10/98

DRG.NO. ARDE-2077 3SHTS, SHT NO. 1 R.NO. 1 DT. 09/12/87 & SHT NO. 3 R.NO. 2, DT. 29/05/89

DRG.NO. ARDE-2077 3SHTS, SHT NO. 1 R.NO. 1 DT. 09/12/87 & SHT NO. 3 R.NO. 2, DT. 29/05/89

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k) DC(I)36868-A, AIDE MEMOIRE W/4

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k) DC(I)36868-A, AIDE MEMOIRE W/4

BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.

BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN.

CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY B DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.

CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY B DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576-A.AIDE MEMOIRE-P/11

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576-A.AIDE MEMOIRE-P/11

Drg Nos.CQA(HV)5.32.000, CQA(HV)5.32.014 & CQA(HV)5.32.016.

Drg Nos.CQA(HV)5.32.000, CQA(HV)5.32.014 & CQA(HV)5.32.016.

175.66.021CB-ACB

175.66.021CB-ACB

IA 1163

IA 1163

IA 1169

IA 1169

IA 1169

IA 1169

DRG. NO. NASK 828/1

DRG. NO. NASK 828/1

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

AS PER SPECIFIED DRGS.

DRG.NO. NAD 2037 R.NO. NIL DT. 28/5/04

DRG.NO. NAD 2037 R.NO. NIL DT. 28/5/04

AS PER SPECIFIED DRG. & SPECIFICATION

AS PER SPECIFIED DRG. & SPECIFICATION

AS PER SPECIFIED DRG. & SPECIFICATION

AS PER SPECIFIED DRG. & SPECIFICATION

SPECN: IS-407-1981

SPECN: IS-407-1981

DELAY TUBE (EMPTY) TO DRG.NO. IQX-943 DC 37296-A DT. 27/12/2011 FOR DETONATOR 36M 4 SEC.

DELAY TUBE (EMPTY) TO DRG.NO. IQX-943 DC 37296-A DT. 27/12/2011 FOR DETONATOR 36M 4 SEC.

DRG.NO. D.D.(L)-15270 D.C.NO. 36836-A DT. 14/06/02 EXCEPT SUB ASSEMBLY 2719

DRG.NO. D.D.(L)-15270 D.C.NO. 36836-A DT. 14/06/02 EXCEPT SUB ASSEMBLY 2719