Items open for Registration

Search

Reset
No Advertisement No. Factory Location Items
55601 ADV_619_128 Ordnance Factory Tiruchirapalli The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name Code Quantity Approx Value Select
Finished Machining Components
Description
Machining Components
Specification
Machining Components
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55602 ADV_147_111 Ordnance Factory Ambernath The Sr.General Manager,
Ambarnath
Ambarnath
Maharashtra
421502
Name Code Quantity Approx Value Select
Rexroth Hydraulic / Pneumatic/Automation/PLC Retrofitment, Linear Motion system., Servo system, Mech
Description
As per Drg. / given sepcification
Specification
As per Drg. / given sepcification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55603 ADV_206_136 Opto Electronic Factory Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name Code Quantity Approx Value Select
Sand Castings (Ferrous/Non Ferrous)
Description
As per OLF Drawings
Specification
As per OLF Drawings
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Machined components & Assemblies (Ferrous/Non Ferrous)
Description
As per OLF Drawings
Specification
As per OLF Drawings
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55604 ADV_701_110 Ordnance Parachute Factory The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name Code Quantity Approx Value Select
TRANSPORT SERVICE
Description
AS PER REQUIREMENT
Specification
AS PER REQUIREMENT
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRANSPORT SERVICE
Description
AS PER REQUIREMENT
Specification
AS PER REQUIREMENT
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TRANSPORT SERVICE
Description
AS PER REQUIREMENT
Specification
AS PER REQUIREMENT
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55605 ADV_32_114 Ordnance Factory Dehradun The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name Code Quantity Approx Value Select
SET OF LENSES FOR LMG 5.56
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SET OF FINISHED OPTICS FOR RIFLE 5.56
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RAW MATERIAL- FUSED SILICA, QUARTZ, SILICON, GERMANIUM, ZINC SULPHIDE ETC.
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RAW MATERIAL-OPTICAL GLASS SLABS, GLASS BLANKS, COLOURED FILTER GLASS.
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FLATS FOR FIRE CONTROL SYSTEMS
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PRISMS FOR FIRE CONTROL SYSTEMS
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
LENSES FOR FIRE CONTROL SYSTEMS
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FLATS FOR DAY & NIGHT DEVICES
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PRISMS FOR DAY & NIGHT DEVICES
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
LENSES FOR DAY & NIGHT DEVICES
Description
As per required Specification
Specification
As per required Specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55606 ADV_331_118 Ordnance Factory Bhusawal The General Manager,
Bhusawal
Bhusawal
Maharashtra
425203
Name Code Quantity Approx Value Select
ALL TYPES CAPCELL WITH ADHENSIVE BACK OF CROSSLINK POLYTHYLENE FOAM.
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
ALL TYPES CAPCELL WITH ADHENSIVE BACK OF CROSSLINK POLYTHYLENE FOAM.
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55607 ADV_880_101 Ammunition Factory Khadki The Cheif General Manager
Kirkee
Kirkee
Maharastra
411003
Name Code Quantity Approx Value Select
INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E
Description
CQA[A] SEALED DRG NO 04-749-130222-02.1E
Specification
CQA[A] SEALED DRG NO 04-749-130222-02.1E
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
MACHINING OF BODY FOR BOMB 51 MM MORT. HE 2A TO ARDE 1933 PT. NO. ITV 17SA (MOU WITH FORGING FIRM)
Description
CQA(A) 2322
Specification
CQA(A) 2322
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
ROUND 40 MM DRILL ( PRACTICE ) DRG. NO. AFK/SK-694-11 DT. 25.03.2011
Description
DRG. NO. AFK/SK-694-11 DT. 25.03.2011
Specification
DRG. NO. AFK/SK-694-11 DT. 25.03.2011
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLUNGER TO CQA(A) DRG. NO. 04-44-79000-06111-4E
Description
CQA(A) DRG. NO. 04-44-79000-06111-4E
Specification
CQA(A) DRG. NO. 04-44-79000-06111-4E
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55608 ADV_752_132 Field Gun Factory Kanpur The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name Code Quantity Approx Value Select
ALL TYPES OF BALL & ROLLER BEARING
Description
AS PER SPECIFICATION/REQUIREMENT
Specification
AS PER SPECIFICATION/REQUIREMENT
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55609 ADV_453_115 Ordnance Factory Muradnagar The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206
Name Code Quantity Approx Value Select
NOSE PLUG 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLUG FASTENING 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLUG DUMMY 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLUG FASTENING 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLUG DUMMY 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RING NUT 1000 LBS
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BASE TRANSIT (MCD) 1000 LBS
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RING NUT 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
FILLING PLUG (MCD) 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
LUG HOUSING 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BASE TRANSIT 250 KG
Description
AS PER OFM SPECIFICATION
Specification
AS PER OFM SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55610 ADV_361_134 High Energy Projectile Factory The Cheif General Manager
Trichy
Trichy
Trichy, Tamil Nadu
620025
Name Code Quantity Approx Value Select
TUNGSTEN POWDER
Description
AS PER SPECN : CQA (M) 58
Specification
AS PER SPECN : CQA (M) 58
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
TUNGSTEN POWDER
Description
AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01.
Specification
AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55611 ADV_19_121 Ordnance Factory Bhandara The Cheif General Manager OFB
Bhandara
Bhandara
Maharashtra
441906
Name Code Quantity Approx Value Select
PAPER WRAPPING WAXED KRAFT AMMUN.
Description
JSS-8135-05:1994
Specification
JSS-8135-05:1994
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PRE - MACHINED AND HEAT TREATED HEAD ROCKET BODY FOR RGB - 12.
Description
AS PER HAPP DRG. NO. O BOD 012 1 019
Specification
AS PER HAPP DRG. NO. O BOD 012 1 019
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
55612 ADV_4_108 Ordnance Clothing Factory Shahjahanpur The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name Code Quantity Approx Value Select
Snap Fastener Spring Type 7/7 Bottom in two parts
Description
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
Specification
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Snap Fastener Spring Type 7/7 Top in two parts(Cap Nickle Plated)
Description
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
Specification
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Piping For Blanket Navy Blue
Description
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX” and Clause A-II (Manufacture)” of the Specification shall not be applicable
Specification
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX” and Clause A-II (Manufacture)” of the Specification shall not be applicable
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Piping For Blanket Navy Blue
Description
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX” and Clause A-II (Manufacture)” of the Specification shall not be applicable
Specification
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX” and Clause A-II (Manufacture)” of the Specification shall not be applicable
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
ALL AMMUNITION BOXES CARRIERS AND ITS COMPONENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
ALL AMMUNITION BOXES CARRIERS AND ITS COMPONENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CARTG. TRAINING FOR 81 MM MORTAR BOMB 3B EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE
Description
CQA (A) 2348
Specification
CQA (A) 2348
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CARTG. TRAINING FOR 81 MM MORTAR BOMB 3A EMPTY TO DRG. NO. ARDE 2254 PT. NO. IRW 3GE
Description
CQA (A) 2348
Specification
CQA (A) 2348
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.
Description
CQA(A) 1804
Specification
CQA(A) 1804
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
105 MM MEDIUM RANGE CHAFF ROCKET (MRCR) (ASSL. EMPTY) DRG. NO. NASK 762 SHT. 1 (PROV)
Description
DRG. NO. NASK 762 SHT. 1 (PROV)
Specification
DRG. NO. NASK 762 SHT. 1 (PROV)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
SHORT RANGE CHAFF ROCKET (SRCR) (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1
Description
DRG NO. NASK 828/1
Specification
DRG NO. NASK 828/1
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
WOOD PACKING
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PLYWOOD TO IS:303
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BOX SM 171 ( ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BOX CHEST RIFLE (ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BOX C-43A, BOX C-44A (ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CARRIER 6A/L, CARRIER 7A/L, CARRIER 13/A, CARRIER 16A (ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BOX H2A, BOX H5A (ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BOX C-51A, BOX C-52A & BOX C-53A (ALL COMPONENTS)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
BRACKET END FOR SHELL
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CENTRE PARTITION
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
HANDLE AND HANDLE CLIP ASSEMBLY
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RUBBER GASKET FOR BOX H2A & BOX H5A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
READYMADE STRENTHENING BAND FOR CARRYING LINK OF BOX C-43A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
READYMADE STRENTHENING BAND FOR CARRYING LINK OF BOX C-44A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PIECE PACKING A & B FOR BOX C-44A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
RUBBER GASKET FOR BOX H2A & BOX H5A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
READYMADE STRENTHENING BAND FOR CARRYING LINK OF BOX C-43A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
READYMADE STRENTHENING BAND FOR CARRYING LINK OF BOX C-44A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PIECE PACKING A & B FOR BOX C-44A
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CROSS LINKED POLYETHYLENE FOAM (CAPCELL)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PROFEEL FITMENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CROSS LINKED POLYETHYLENE FOAM (CAPCELL)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PROFEEL FITMENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PROFEEL FITMENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CROSS LINKED POLYETHYLENE FOAM (CAPCELL)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PROFEEL FITMENTS
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
CROSS LINKED POLYETHYLENE FOAM (CAPCELL)
Description
AS PER OFBH REQUIRED SPECIFICATION
Specification
AS PER OFBH REQUIRED SPECIFICATION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PVC insulated wire & cables
Description
-
Specification
-
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PTFE Sleeves
Description
-
Specification
-
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
PTFE insulated equipments wire & cables
Description
-
Specification
-
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
Proceed