SPECN : IS: 2730 -1977 (REAFF 2015) 1ST REVISION(LATEST ISSUE)

SPECN : IS: 2730 -1977 (REAFF 2015) 1ST REVISION(LATEST ISSUE)

AS PER SPECIFICATION NO. HEF/IO/AP/07/2016(Rev 1)

AS PER SPECIFICATION NO. HEF/IO/AP/07/2016(Rev1)

TAPE NYLON 66 26MM B.S 850 KG U/D RESIN TREATED 1.5 TO 2.5 % ROLL LENGTH 90 MTRS. (EXCLUDING SAMPLING)

SPECN.NO: ADRDE/SPECN/ 2000/54(c). Rolls length = 94 mtrs and multiples (includes testing length)

TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.

TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

914.4 MM WIDE TO SPECN : HEF/MI/1 DT 6.04.82 & OTHER PARAMETERS AS PER IS : 179 : 2009 (III REV) (LATEST ISSUE)

914.4 MM WIDE TO SPECN : HEF/MI/1 DT 6.04.82 & OTHER PARAMETERS AS PER IS : 179 : 2009 (III REV) (LATEST ISSUE)

914.4 MM WIDE TO SPECN : HEF / MI/1 DATED 06.04.1982 AND OTHER PARAMETERS IS : 5088-1982(AMENDMENT 2) REAFF 2017

914.4 MM WIDE TO SPECN : HEF / MI/1 DATED 06.04.1982 AND OTHER PARAMETERS IS : 5088-1982(AMENDMENT 2) REAFF 2017

SPECN IS: 718-1977 (II REVISION) WITH AMENDMENT NO. 1&2 REAFF : 2015 (LATEST ISSUE)

SPECN IS: 718-1977 (II REVISION) WITH AMENDMENT NO. 1&2 REAFF : 20115(LATEST ISSUE)

PURITY 98% MINIMUM IS: 2697-1976 (REAFF : 2014) 1ST REVISION

PURITY 98% MINIMUM IS: 2697-1976 (REAFF : 2014) 1ST REVISION

SPECIFIC GRAVITY 0.910 MAX LIQUOR MADE FROM AMMONIA GRADE-2 TO SPECN IS : 799:1985 IIND REV REAFF 2016 (LATEST ISSUE)

SPECIFIC GRAVITY 0.910 MAX LIQUOR MADE FROM AMMONIA GRADE-2 TO SPECN IS : 799:1985 IIND REV REAFF 2016 (LATEST ISSUE)

Acetic acid, AR- grade

IS: 695-1986 (3rd Revision) Reaff 2013(latest Issue)

Sodium Hypochlorite Grade II to specification no IS: 11673-1993, 1st revision, amendment no 1,2, 3 & 4 Reaff 2015.

IS: 11673-1993, 1st revision, amendment no 1,2, 3 & 4 Reaff 2015.

TAPE NYLON 66 26MM B.S 850 KG U/D RESIN TREATED 1.5 TO 2.5 % ROLL LENGTH 90 MTRS. (EXCLUDING SAMPLING)

SPECN.NO: ADRDE/SPECN/ 2000/54(c). Rolls length = 94 mtrs and multiples (includes testing length)

FOR LABS PRODUCTION TO SPECN: HEF/IO/67 dated 21.12.1995. (I) COLOURLESS LIQUID FREE FROM FOREIGN MATTER AND VISUAL IMPURITIES (II)SP. GR. 0.855 TO 0.870 @ 15 DEG.CENT (III) PRACTICAL TRAIL TEST TO PASS SULPHONATION. MATERIAL TOBE CLED. AFTER USER TRIAL & TEST CERT. FROM FIRM TO BE SUBMITTED

HEF/IO/67 dated 21.12.1995

IS 517:1986 II REVISION (REAFFIRMED 2013) (LATEST ISSUE)

IS 517:1986 II REVISION (REAFFIRMED 2013) (LATEST ISSUE)

IS:265-1993(REAFF:2015)(IV REVISION) LATEST ISSUE

IS:265-1993(REAFF:2015)(IV REVISION) LATEST ISSUE

DMF PACKED IN HM HDPE DRUMS OF 200 LTR CAPACITY ONLY ACCEPTABLE

HEF/IO/65 DT 21.12.1995 USER'S TRIAL BEFORE ACCEPTING THE CONSIGNMENT.

COLOUR NOT DARKER THAN SOLN.OF 0.003GMS.OF K2CR207 IN 1 LIT OF WATER DIST.RANGE:AS PER ASTM 130-145 DEG.C FLASH POINT:76DEG MIN. COPPER CORROSION:NIL BENZENE & TOLUENE: 2% MAX. NONAROMATIC HYDROCARBONS: 9% MAX. ETHYL BENZENE:20%AMX. P-XYLENE:23% AMX. M-XYLENE:50% MIN O-XYLENE:8% MAX

SPECN . HEF/IO/68 DT 22.12.1995

WOOD FOR PACKING 10 KGS. CARTRIDGE PEK-I 100 GMS A (IN CARTONS) AS PER DRG NO. IND/ME/55 WITH DC NO. 3565-ME DT 12.03.99

IND/ME/883(f) - 2015 , DC NO.5452-ME DT.01.06.2016 DRG.NO.HEF/5038

SPECN NO. IND/ME/748 (b), D.C. NO. 2144-ME DT 19.10.1977 (NATURAL RUBBER) (LATEST ISSUE)

SPECN NO. IND/ME/748 (b), D.C. NO. 2144-ME DT 19.10.1977 (NATURAL RUBBER) (LATEST ISSUE)

AMMUNITION TO SPECN JSS-9160-05-2016 (REV NO.3) DC 5475 -ME DT. 24.09.2016

AMMUNITION TO SPECN JSS-9160-05-2016 (REV NO.3) DC 5475 -ME DT. 24.09.2016

JSS 8030-09:2016 REV NO.3 (D.S CAT NO. 8030-000032) DC 3744-ME DATED 17.09.2002

JSS 8030-09:2016 REV NO.3 (D.S CAT NO. 8030-000032) DC 3744-ME DATED 17.09.2002

JSS.6810-85-2016(Revision No. 2) D.C.No. 5057-ME DT 12.12.2011 (Latest Issue)

JSS.6810-85-2016(Revision No. 2) D.C.No. 5057-ME DT 12.12.2011 (Latest Issue)

IND/ME/1011 (PROV) MARCH 2000 DC NO. 3607-ME DATED 13.03.2000 (LATEST ISSUE)

IND/ME/1011 (PROV) MARCH 2000 DC NO. 3607-ME DATED 13.03.2000 (LATEST ISSUE)

IS - 266 -1993 REAFF 2015

IS - 266 -1993 3rd REV REAFF 2015.

LIGHT GRADE TO SPECIFICATION : IS. 251-1998(IV REVISION) REAFF 2015

LIGHT GRADE TO SPECIFICATION : IS. 251-1998(IV REVISION) REAFF 2015

TO USE FOR MANUFACTURE OF EXPLOSIVES TO SPECN : IS :170-2004 (REAFF. .2015) (4TH REV) (LATEST ISSUE)

IS :170-2004 (REAFF. .2015) (4TH REV) (LATEST ISSUE)

RING ARMING FOR RIFLE GRENADE

AS PER DRG NO ITW 51

ITW 51

PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE RED SIGNAL ISC 537 OF IS : 5-2007 (LATEST ISSUE) SPECN IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90

IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90

READY MIXED PAINT MARKING FOR PACKAGES & PETROL CONTAINERS WHITE ,SPECN IS: 138-1992 (4 TH REV) Reaff 2014, AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50 .

IS: 138-1992 (4TH REV) Reaff .2014,AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50 .

PAINT RM AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE OLIVE GREEN. ISC 220 OF IS : 5-2007 REAFF : 2017 (6TH REV) SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90

SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

LT. NO. STD. CELL/TE/SCRUTINY T. SECTION 5.8.2006 SEWING THREAD 125D TEX/3 SPUN POLYESTER OG IN TUBE OF 1000 MTRS. SPECN; IND/TC/0296(b) CQA(T&C)/PMS/36(a) AS PER RELEVENT CLAUSE OF SPECIFICATION AS PER RELEVENT CLAUSE OF SPECIFICATION

LT. NO. STD. CELL/TE/SCRUTINY T. SECTION 5.8.2006 SEWING THREAD 125D TEX/3 SPUN POLYESTER OG IN TUBE OF 1000 MTRS. SPECN; IND/TC/0296(b) CQA(T&C)/PMS/36(a) AS PER RELEVENT CLAUSE OF SPECIFICATION AS PER RELEVENT CLAUSE OF SPECIFICATION

Thread sewing Spun Polyester 145 D Tex X 6 Khaki IS:9543-1980 RA-2010

Thread sewing Spun Polyester 145 D Tex X 6 Khaki IS:9543-1980 RA-2010

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING / INSPECTION FACILITY FILES

Thread Sewing Spun Polyester Khaki 125 D tex KHAKI (Vr.No.4) IS:9543-1980 (V.No.4) RA-2010 Note- Sewing thread shall be supplied in Tube of 1000 mtrs

Thread Sewing Spun Polyester Khaki 125 D tex KHAKI (Vr.No.4) IS:9543-1980 (V.No.4) RA-2010 Note- Sewing thread shall be supplied in Tube of 1000 mtrs

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING / INSPECTION FACILITY FILES

TOP WASHER TO DRG. NO. ARDE 1135 DETAIL NO.13 AL NO. 20/2018 DTD. 09/10/2018

TOP WASHER TO DRG. NO. ARDE 1135 DETAIL NO.13 AL NO. 20/2018 DTD. 09/10/2018

ARDE 1135

FOR SLAB DEMOLITION TNT 500 gms

DRG NO. IND/ME/74 DC 3752-ME DT 12.12.02 (LASTEST ISSUE)

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

TOLUENE PURE NITRATION GRADE

IS : 537- 2025 WITH THE FOLLOWING ADDITIONAL CLAUSES (1)PURITY 99.7% MIN. (2) Non Aromatic Hydrocarbons- 0.3% MAX. (3) BENZENE 0.05% MAX ,ADDITIONAL TESTS (PURITY NON AROMATIC HYDROCARBON AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY .

• ATTACHED

• ATTACHED

IS : 264 - 2005 (REAFF 2017) III RD REV. TOTAL ACIDITY (AS HNO3) PERCENT BY MASS, MIN (EXPLOSIVE GRADE) : 98.0% RE-SIDUE ON IGNITION PERCENT MIN. 0.05, CHLORIDES (AS CL) PER-CENT MAX 0.001, SULPHATE (AS H2SO4) PERCENT MAX 0.03 NITROUS ACID AS (HNO2) PERCENT BY MASS MAX 0.2

IS : 264 - 2005 (REAFF 2017) III RD REV

Technical grade IS: 247:1987 IVTH REV (REAFF 2015)

IS :247:1987 IVth REV (REAFF 2015) , with additional clause (1) Meta bi sulfate content Shall be Nil (2) Ph of 10% solution should be 8.5 to 9.5.

IS: 248-1987 4TH REV (Reaff 2015)

IS: 248-1987 4TH REV (Reaff 2015)

nil

IS 8397- 1976 REAFF 2016 WITH ADDITIONAL CLAUSE OF NITROBENZENE CONTENT 0.10% MAXIMUM.

IS: 8397- 1976 REAFF. 2016 WITH ADDITIONAL CLAUSE OF NITROBENZENE CONTENT 0.10% MAXIMUM.

IS :1089-1986, REAFF 2015) EXPLOSIVES GRADE, (IIND REV) (A) CONTENTS OF FREE SO3 20% TO 22% (B) IRON:0.01% MAXIMUM (C) LEAD:0.01% MAXIMUM (D) RESIDUE : 0.06% MAXIMUM (E) SPECIFIC GRAVITY MINIMUM 1.920 ,MAXIMUM 1.925 AT 15 DEG C

IS: 1089-1986, (REAFF 2015)EXPLOSIVES GRADE, (IIND REV)

FILLING OF GAS IN OUR CYLINDER, AFTER NECESSARY PRESSURE TESTING OF CYLINDER, CYLINDER CAPACITY 50 KG.

IS: 2432-1993 (1st REV) REAFF 2016 (EDITION 2.1) (1998-02)

HDPE Woven Sac Bags (25 Kg Capacity) for packing of TNT as per drawing NO. HE-5036/B.

DRW NO. HE-5036/B

DRW NO. HE-5036/B

PALE YELLOW LIQUID - NO SUSPENDED MATTER OR SEDIMENT.TOTAL ACIDITY (AS HNO3)% BY MASS 57 TO 62, NITROUS ACID (AS HNO2)% BY MASS MAX 0.2, RESIDUE ON IGNITION % BY MASS MAX 0.01,CHLORIDES (AS CL)% BY MASS 0.001, SULPHATES (AS H2SO4)% BY MASS MAX0.03, ORGANIC MATTER - NIL

IND/ME/129 & IS: 264-2005 (Reaff 2010) 3rd revision, HEF /IO/DNA/02 DT.25.10.2017,

• test

• test

In lay flat condition Five Ply with additional bottom liner and side sleeve and with handle of cotton webbing color olive green for packing 20 Kgs of TNT to specn IO/81/2003 DT 20.02.2003 DRG. NO. HE/5035 (Amendment Dt 22/08/2006)

to specification no: HEF/IO/81/2003 DT 20.02.2003

DRG. NO. HE/5035 (AMENDMENT DT 22.08.2006)

STEEL ROUND 38MM DIA 350 PLUS 3MM

STEEL ROUND 38MM DIA 350 PLUS 3MM

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 8

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AS PER DRG

AS PER DRG

Nickel Powder as per CQAM-58 Specification

As per enclosed Monitoring Instructions No: HAPP/QA/SC/G/028, Issue No. 01, Rev. No.02, Date of Issue 18/01/2017 (Annexure A).

TUNGSTEN POWDER

CQAM-58 SPECIFICATION

COAL SIZE 5 KGS LUMP MINIMUM

COAL SIZE 5 KGS LUMP MINIMUM

DRG NO. CQA (ME) IND/ME/9

DRG NO. CQA (ME) IND/ME/9

TAPE ADHESIVE FABRIC W/P 20 MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

TAPE ADHESIVE FABRIC W/P 20 MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

CIA/AMN/2158PT ISV 1740

CIA/AMN/2158PT ISV 1740

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

DRG.PT.NO. ISV 862 DCI-36

DRG.PT.NO. ISV 862 DCI-36

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67

CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

ANTISTATIC PACKING PIECES CONSISTING OF (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

(1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. RED SIGNAL ISC 537 OF IS:5 2007 REAFF 2012 (VITH REV)(LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A, SPECN. NO. CQA(A) 1504(E) DC 35870-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A

STRAPPING 13MM WIDEX 0.5MM THICK TENSILE STRENGTH 63 TO 70 KGF/SQR MM (618N/SQRMM TO 686N/SQRMM) BLUE FININSH. COIL IMME-RSED IN ANTIRUST SOLUTION PRIOR TO WRAPPING WITH SUITABLE HESSIAN CLOTH.

APPROX OUTSIDE DIA OF COIL TO BE 650MMXINT DIA 400MM SPECN IS5872-1990(LATEST) REVISION IIND REAFF : 2010

AMMUNITION PROTECTIVE COMPOSITION NO 2 (CEMENT RD 1192 K AMMUNITION)

SPECN JSS 8030-14-2009 (REVISION NO.3) DC 4054-ME, DT 08.01.2010

AMMUNITION PROTECTIVE COMPOSITION NO.10(LUTING THIN MK-5) SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

GAS TO BE SUPPLIED IN FIRM'S CYLINDERS

HEF/IO/64 DATED 21.12.1995 ELECTROLYTIC GRADE (FROM ELECTROLYSIS OF WATER)

SPEC. HEF/IO/68B DT 25.04.08 (A) CLEAR LIQUID (B) SP.GR.AT 20DEG CENT.MAX.0.73 (C)TEA CONTENT 98.5% MIN. (D)WATER INSOL.MIX OF TEA & WATER IN 1.1 RATIO BY VOL.&COOLED TO 18 DEG.CENT SHOULD BE COMPLETELY MISCIBLE (E) DIST.RANGE 85-91 DEG.CENT MIN 95% (F)WATER CONTENT LESS THAN 0.1% (BY KARL FISHER METHOD)

HEF/IO/68B DT. 25.04.08

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)