CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

AS PER ATTACHED SAMPLE

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

DRG. NO. SK-5574R

User's Manual For Revolver .32 (7.65mm) Specification Details should be as per Annexure "A".

User's Manual For Revolver .32 (7.65mm) Specification Details should be as per Annexure "A".

Specification Details should be as per Annexure "A".

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

DRG.NO.SK-4745*2,

• as per attachment

• as per attachment

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

LEVER STUD CHANGE LEFT DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC (MIM ROUTE)

LEVER STUD CHANGE LEFT DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC (MIM ROUTE)

DRG NO. 0204 03 02 02 20 002 00DD

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)

NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 011 00DA

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

0204-03-02-00-06-005-00DB

TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR

AS PER REQUIREMENT AND SPECIFICATION

WASHER COPPER HOSE TINNED 5 5 MM ID X 14 MM OD X 1 25 MM THICK

AS PER REQUIREMENT AND SPECIFICATION

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

DRG No.0204-03-04-02-14-021-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN SPECN NO. TU 2421-117-00151727-98 GRADE-MAKE:HAYMEN/ RANKEM/MERCK/ THERMO FISHER SIZE: 1 LITRE/ 1.5 LITRE/ 2 LITRE.

SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN SPECN NO. TU 2421-117-00151727-98 GRADE-MAKE:HAYMEN/ RANKEM/MERCK/ THERMO FISHER SIZE: 1 LITRE/ 1.5 LITRE/ 2 LITRE.

BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE

BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE

• as per file attached

• as per file attached

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

RIVET STEEL FLAT HEAD 3.15MM DIA X 8MM LONG

IS:2998-LATEST

HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE

IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PLATE ENGAGING COMPLATE WITH LINK AS PER DRG NO OFB/C/718,566

SPECN NO. IA 1169(n)

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:1397-1990, REAF. 2002

IS:1397-1990, REAF. 2002

HDPE BAG WHITE OF SIZE 750 X 500 X1000MM

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

TIMBER CHIR,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR.

AS PER REQUIREMENT AND SPECIFICATION

TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

DRG.NO.0204 03 02 00 01 010 00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE,DRG.No.0204-03-02-00-00-004-00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE,DRG.No.0204-03-02-00-00-004-00DA

0204-03-02-00-00-004-00DA

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION

FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION

DRG.NO. NAD 7606/4

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Drg no-PHMK-IV-3-1-3

PACKING ENCLOSURE FOR COMPONENTS OF AN-32 PLATFORM AS PER DRAWING NO. SK-1252 A.

PACKING ENCLOSURE FOR COMPONENTS OF AN-32 PLATFORM AS PER DRAWING NO. SK-1252 A.

IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/-

IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/-

IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO

IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO

FABRIC NYLON BLACK 250 GMS P U COATED 172 CMS WIDE.

Specification No. IND/TC/0155 Except Threads/Cm (As per

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983

AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

YARN WOOL POLYAMIDE (80:20) 240 TEX RED COLOUR, OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX RED/2012 AND ANNEXURE-I ATTACHED. AS PER RELEVANT CLAUSE OF THE SPECIFICATION, AS PER RELEVANT CLAUSE OF THE SPECIFICATION

YARN WOOL POLYAMIDE (80:20) 240 TEX RED COLOUR, OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX RED/2012 AND ANNEXURE-I ATTACHED. AS PER RELEVANT CLAUSE OF THE SPECIFICATION, AS PER RELEVANT CLAUSE OF THE SPECIFICATION

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)

NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)

As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)

As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)

IND/TC/1208

IND/TC/1208

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION.

PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION.

SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208

SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208

• as per attach file

• as per attach file

PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only

PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only

OCFS /YARN WOOL POLYAMIDE (80:20) 240 TEX OG /2016 AS PER RELEVANT CLAUSE OF THE SPECIFICATION.

OCFS /YARN WOOL POLYAMIDE (80:20) 240 TEX OG /2016 AS PER RELEVANT CLAUSE OF THE SPECIFICATION.

• as per attached manufacturing technnology files

• as per attached testing / Inspection facility Files

FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)

FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

AL ALLOY ROD 17 MM +/- 0.1 SPECN IS: 733 REAFFIRMED

AL ALLOY ROD 17 MM +/- 0.1 SPECN IS: 733 REAFFIRMED

AL ALLOY ROD 12 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 12 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 8 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 8 MM +/- 0.1 MM DIA TO SPECN IS:733

PIPE ASSY 765-06-CD410

PIPE ASSY 765-06-CD410

765-06-CD410

Trigger Rear with Machining Route. Drg.No.0204-03-02-02-18-013-00DC

Trigger Rear with Machining Route. Drg.No.0204-03-02-02-18-013-00DC

Drg.No.0204-03-02-02-18-013-00DC

LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF

LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF

0204-03-02-18-30-001-00DF

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BALL BEARING JOURNAL SINGLE ROW 15MM X 35MM X 11MM TO CAT PT NO LV6 MT 7 3110000091 SKF 6202

BALL BEARING JOURNAL SINGLE ROW 15MM X 35MM X 11MM TO CAT PT NO LV6 MT 7 3110000091 SKF 6202

BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.388.004)

BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CUZN37MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4%MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM(REF.DRG.NO.BW8.388.004)

COPPER STRIP TO SPECN. IS:14811:2000. CONDITION HD GRADE CU CATH-2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE

COPPER STRIP TO SPECN. IS:14811:2000. CONDITION HD GRADE CU CATH-2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE

STEEL ROD,SIZE-50MM DIA + 2MM X 1.2 M OR ITS MULTIPLE LENGTH SPECN: IS:1570(PART-II)-1979,REAFFIRMED 2004, GR.-35C4 IN HOT ROLLED OR NORMALISED CONDITON.CHEMICAL ANAL, REPORT FROM HOT ROLLED OR NORMALISED CONDITON.CHEMICAL ANAL, REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS

STEEL ROD,SIZE-50MM DIA + 2MM X 1.2 M OR ITS MULTIPLE LENGTH SPECN: IS:1570(PART-II)-1979,REAFFIRMED 2004, GR.-35C4 IN HOT ROLLED OR NORMALISED CONDITON.CHEMICAL ANAL, REPORT FROM HOT ROLLED OR NORMALISED CONDITON.CHEMICAL ANAL, REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS

STEEL ROD,SIZE-70MM DIA + 2MM X 1.2 M OR ITS MULTIPLE LENGTH SPECN:IS:1570(PART-II)-1979,REAFFIRMED 2004,GR.-35C4 IN HOT ROLLED OR NORMALISED CONDITION. CHEMICAAAL ANAL.REPORT FROM ROLLED OR NORMALISED CONDITION. CHEMICAAAL ANAL.REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS.

STEEL ROD,SIZE-70MM DIA + 2MM X 1.2 M OR ITS MULTIPLE LENGTH SPECN:IS:1570(PART-II)-1979,REAFFIRMED 2004,GR.-35C4 IN HOT ROLLED OR NORMALISED CONDITION. CHEMICAAAL ANAL.REPORT FROM ROLLED OR NORMALISED CONDITION. CHEMICAAAL ANAL.REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS.

STEEL ROD,SIZE-105MM DIA + 2MM X 1.2M OR ITS MULTIPLE LENGTH SPECN:IS:1570(PART-II)-1979,REAFFIRMED 2004, GR.-25C4 IN HOT ROLLED OR NORMALISED CONDITION. CHEMICAL ANAL.REPORT FROM ROLLED OR NORMALISED CONDITION. CHEMICAL ANAL.REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS.

STEEL ROD,SIZE-105MM DIA + 2MM X 1.2M OR ITS MULTIPLE LENGTH SPECN:IS:1570(PART-II)-1979,REAFFIRMED 2004, GR.-25C4 IN HOT ROLLED OR NORMALISED CONDITION. CHEMICAL ANAL.REPORT FROM ROLLED OR NORMALISED CONDITION. CHEMICAL ANAL.REPORT FROM TOBE FURNISHED.MATERIAL SHOULD BE FREE FROM INTERNAL CRACKS.

C.R GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE:1.08+/- 0.01MM THICK X 138+2.0-0.0MM WIDE,COIL WT.90-120KG.INTERNAL DIA.OF COIL 300-400MM,CONFIRMING SPECN.IS:2768(LATEST ISSUE) BOW LIMIT 5MM IN 3METER MAX.HARDNESS 60 TO 70VPN,GRAIN SIZE: 0.05MAX.FREE FROM PREFERED GRAIN ORIENTATION & OTHER DEFECTS (For GM CUP 5.56 MM)

C.R GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE:1.08+/- 0.01MM THICK X 138+2.0-0.0MM WIDE,COIL WT.90-120KG.INTERNAL DIA.OF COIL 300-400MM,CONFIRMING SPECN.IS:2768(LATEST ISSUE) BOW LIMIT 5MM IN 3METER MAX.HARDNESS 60 TO 70VPN,GRAIN SIZE: 0.05MAX.FREE FROM PREFERED GRAIN ORIENTATION & OTHER DEFECTS (For GM CUP 5.56 MM)

MANGANESE COPPER MASTER ALLOY. IS: 5743-1991 ALLOY DESIGNATION CU.MN.30.IN THE FORM OF NOTCHED INGOTS PACKED IN WOODEN CASES WEIGHING NOT MORE THAN 50 KG MARKING ON EACH INGOT STRICTLY AS PER IS 5743 CLAUSE 7.2 ANALYSIS FOR EVERY 500 KG LOT TO BE SUPPLIED

MANGANESE COPPER MASTER ALLOY. IS: 5743-1991 ALLOY DESIGNATION CU.MN.30.IN THE FORM OF NOTCHED INGOTS PACKED IN WOODEN CASES WEIGHING NOT MORE THAN 50 KG MARKING ON EACH INGOT STRICTLY AS PER IS 5743 CLAUSE 7.2 ANALYSIS FOR EVERY 500 KG LOT TO BE SUPPLIED

• as per manufacturing Technology attachment

• as per testing factility attachment

TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS

CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS

DRG.NO.ARDE 2120 DET 10, DRG NO ARDE 2120 DET 11.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

REPLACEMENT OF SILICON RUBBER SEAL OF STEEL CUP FOR 120 MM FSAPDS & HESH

REPLACEMENT OF SILICON RUBBER SEAL OF STEEL CUP FOR 120 MM FSAPDS & HESH

• rubberising technology

• rubber testing equipment