CONNECTOR PLUG PCB MOUNTED D T YPE, SUB MINIATURE-DAM15P500, [ EQUIVALENT TO FCI OEN MAKE NO.DAM 15P532N ]

CONNECTOR PLUG PCB MOUNTED D T YPE, SUB MINIATURE-DAM15P500, [ EQUIVALENT TO FCI OEN MAKE NO.DAM 15P532N ]

SOCKET 322C051H01

SOCKET 322C051H01

PLUG D38999/24WA35PN

PLUG D38999/24WA35PN

SOCKET 322CO54H01 SOCKET 322CO54H01

SOCKET 322CO54H01 SOCKET 322CO54H01

PLUG MS27474T16B35PA

PLUG MS27474T16B35PA

SOCKET 322C045H01

SOCKET 322C045H01

SOCKET 222C14M16

SOCKET 222C14M16

AS PER SPECIFICATION

SOCKET RP15-50GVV TO SPEC. NO. GEO364160TU

SOCKET RPS1-M-7G Drg No.ASLR.434410.022 TY SOCKET RPS1-M-7G FOR STABILIZE R 1G46 TO SPECN. NO. ASLR.434410.022 TY

SOCKET RPS1-M-7G Drg No.ASLR.434410.022 TY SOCKET RPS1-M-7G FOR STABILIZE R 1G46 TO SPECN. NO. ASLR.434410.022 TY

MICRO SWITCH PKN 105.1-1V Drg No.TAFL.642135.004TY MICRO SWITCH PKN 105.1-1V AS P ER SPECN. NO.TAFL.642135.004TY

MICRO SWITCH PKN 105.1-1V Drg No.TAFL.642135.004TY MICRO SWITCH PKN 105.1-1V AS P ER SPECN. NO.TAFL.642135.004TY

SPECN:- ADRDE/1319(a)

SPECN:- ADRDE/1319(a)

MOTOR,DPM25-HI-03 MOTOR DPM25-H1-03 ,SPECN.NO: OST 160-515.022-76

MOTOR,DPM25-HI-03 MOTOR DPM25-H1-03 ,SPECN.NO: OST 160-515.022-76

MOTOR,DID-3TV SPECN NO: 9YA0.312.006 TU

MOTOR,DID-3TV SPECN NO: 9YA0.312.006 TU

9927091303 MOTOR,D12-TF-2SERIES , AS PER SPECN. TY.232-65

9927091303 MOTOR,D12-TF-2SERIES , AS PER SPECN. TY.232-65

RESISTOR S2-29V-0.25-120 OHM Drg No.SPCNNO:OZHO467099TU RESISTOR S2-29V-0.25-120 OHM + /-0.25%-1 AS PER SPECN. NO.OZHO.467.099 TU

RESISTOR S2-29V-0.25-120 OHM Drg No.SPCNNO:OZHO467099TU RESISTOR S2-29V-0.25-120 OHM + /-0.25%-1 AS PER SPECN. NO.OZHO.467.099 TU

RESISTOR S2-29V-0.25-100 OHM Drg No.SPCNNNO:OZHO467099TU RESISTOR S2-29V-0.25-100 OHM + /-0.25%-1-A AS PER SPECN. NO. OZHO.467.09 9TU

RESISTOR S2-29V-0.25-100 OHM Drg No.SPCNNNO:OZHO467099TU RESISTOR S2-29V-0.25-100 OHM + /-0.25%-1-A AS PER SPECN. NO. OZHO.467.09 9TU

RESISTOR S2-23-0.25-61.9 OHM1% Drg No.SPCNNO:OZHO467081TU RESISTOR S2-23-0.25-61.9 OHM + /- 1% B-V AS PER SPECN. NO. OZHO.467.08 1 TU

RESISTOR S2-23-0.25-61.9 OHM1% Drg No.SPCNNO:OZHO467081TU RESISTOR S2-23-0.25-61.9 OHM + /- 1% B-V AS PER SPECN. NO. OZHO.467.08 1 TU

DIODE 2D419B Drg No. SPCNNO:AAO339156TU DIODE 2D419B AS PER SPECIFICAT ION NO AAO.339.156 TU

DIODE 2D419B Drg No. SPCNNO:AAO339156TU DIODE 2D419B AS PER SPECIFICAT ION NO AAO.339.156 TU

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

DIODE ZENER 2S147A ZENER DIODE 2S147A SM3.362.077 G4 AS PER SPECIFICATION NO SM3.36 2.805 TY

DIODE ZENER 2S147A ZENER DIODE 2S147A SM3.362.077 G4 AS PER SPECIFICATION NO SM3.36 2.805 TY

CERAMIC CAPACITOR 110 PF, 200V COG CERAMIC CAPACITOR 110 PF + /-5%, 200V OF KEMET MAKE (C322C111J2G5TA)

CERAMIC CAPACITOR 110 PF, 200V COG CERAMIC CAPACITOR 110 PF + /-5%, 200V OF KEMET MAKE (C322C111J2G5TA)

CAPACITOR 0.022 MF +/-5%, 50V

CAPACITOR 0.022 MF +/-5%, 50V

CAP. TANT 3.3 MF,16 V CAPACITOR TANTALUM 3.3 MF +/- 10%, 16 V AXIAL TYPE PART NO. VISHAY SPRAGUE-CTS13 335X9016A2P

CAP. TANT 3.3 MF,16 V CAPACITOR TANTALUM 3.3 MF +/- 10%, 16 V AXIAL TYPE PART NO. VISHAY SPRAGUE-CTS13 335X9016A2P

CAP. ELECT. 10000MF, 63V DC Drg No.OLF/A-1/SPEC/CAP/CTI/T-72/14 CAPACITOR ELECTROLYTIC, 10000 MF, 63V DC,AS PER SPECN.NO- OLF/A-1/SPEC/CAP/CTI/T-2/14

CAP. ELECT. 10000MF, 63V DC Drg No.OLF/A-1/SPEC/CAP/CTI/T-72/14 CAPACITOR ELECTROLYTIC, 10000 MF, 63V DC,AS PER SPECN.NO- OLF/A-1/SPEC/CAP/CTI/T-2/14

CAP TANTALUM 47 MF 10%, 35V TANTALUM CAPACITOR AXIAL TYPE HERMATICALLY SEALED 47MF, +/- 10%, 35V JSS 50205

CAP TANTALUM 47 MF 10%, 35V TANTALUM CAPACITOR AXIAL TYPE HERMATICALLY SEALED 47MF, +/- 10%, 35V JSS 50205

CAP KM 4A N90 0.1 MF +80/-20% CAPACITOR KM-4A-N90 0.1MF + 80 % -20% OZHO 460.043 TY

CAP KM 4A N90 0.1 MF +80/-20% CAPACITOR KM-4A-N90 0.1MF + 80 % -20% OZHO 460.043 TY

CAP KM 4A N30 0.01 MF,+50%-20% CAPACITOR KM-4A-N30 0.01MF + 50% -20% OZHO 460.043 TY

CAP KM 4A N30 0.01 MF,+50%-20% CAPACITOR KM-4A-N30 0.01MF + 50% -20% OZHO 460.043 TY

RESISTOR SP4-1V-0.25-22 KOHM Drg No.OZHO.468.045 TU RESISTOR SP4-1V-0.25-22 KOHM + /-20%-A-VS-2 AS PER SPECN. NO. OZHO.468.04 5 TU

RESISTOR SP4-1V-0.25-22 KOHM Drg No.OZHO.468.045 TU RESISTOR SP4-1V-0.25-22 KOHM + /-20%-A-VS-2 AS PER SPECN. NO. OZHO.468.04 5 TU

CAPACITOR K53-1A-16V-15MF+/-20 Drg No.OZHO.464.044 TU CAPACITOR K53-1A-16V-15MF +/-2 0%-VAS PER SPECN. NO. OZHO.464.04 4 TU

CAPACITOR K53-1A-16V-15MF+/-20 Drg No.OZHO.464.044 TU CAPACITOR K53-1A-16V-15MF +/-2 0%-VAS PER SPECN. NO. OZHO.464.04 4 TU

RESISTOR Drg No.OZHO468530TU RESISTOR SP5-21A-1-4.7KOHM+/-0 .5% AS PER SPECN. NO.OZHO468530TU

RESISTOR Drg No.OZHO468530TU RESISTOR SP5-21A-1-4.7KOHM+/-0 .5% AS PER SPECN. NO.OZHO468530TU

RESISTOTR SP5-21A-1-4.7KOHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER SPECIFICATION NO.OZHO.468.530 TY

RESISTOTR SP5-21A-1-4.7KOHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER SPECIFICATION NO.OZHO.468.530 TY

SAFE&ARM DEVICE SAD FOR ARTY FUZE SAFE AND ARM DEVICE FOR FUZE PD155 DRG NO 770 13 21 00

SAFE&ARM DEVICE SAD FOR ARTY FUZE SAFE AND ARM DEVICE FOR FUZE PD155 DRG NO 770 13 21 00

770-13-21-00

CANVAS BAG

CANVAS BAG

675-64-CD321

GASKET

GASKET 700-40-191

700-40-191

BRACKET TO DRG NO. ILG-1516/IWP-1976

BRACKET TO DRG NO. ILG-1516/IWP-1976

DRG NO. ILG-1516/IWP-1976

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SEALANT YT-32 AS PER SPCN NO. TY:38.105.462-80

TY:38.105.462-80

ADRDE/1328

ADRDE/1328

SNAP FASTNER 04 PIECES

IS : 4741-1968

TAPE NYLON 2.54 CM U/D BS 227 KG

DRG. NO. IS 6349-1981

SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS

SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TAG PIN WASHER ASSEMBLY (ARDE NO. 2236 DET-10) IN FINISHED CONDITION

TAG PIN WASHER ASSEMBLY (ARDE NO. 2236 DET-10) IN FINISHED CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL

LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL

K2040

SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014

SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING / INSPECTION FACILITY FILES

C.I. MOULD, SIZE: 225MMX51MMX1020MM AS PER DRG NO. 12M-546 DATED: 21/11/2006, SUPPLIER SHOULD FURNISH CHEMICAL ANALYSIS REPORT/CERTIFICATE. NO PROTECTIVE COATING TO BE APPLIED ON MACHINED SURFACES.

C.I. MOULD, SIZE: 225MMX51MMX1020MM AS PER DRG NO. 12M-546 DATED: 21/11/2006, SUPPLIER SHOULD FURNISH CHEMICAL ANALYSIS REPORT/CERTIFICATE. NO PROTECTIVE COATING TO BE APPLIED ON MACHINED SURFACES.

12M-546

• as per attached document

• as per attached document

CONVERSION OF GILDING METAL SCRAP TO C. R. STRIP, ANNEALE & PICKLED READY TO CUP, SIZE: 1.08 ±0.01 mm THICK x 138+2.00-0.00 mm Wide COIL WEIGHT 90-120 KG, INTERNAL DIA OF COIL 300 TO 400 MM CONFIRMING TO SPECIFICATION IS: 2768 (LATEST ISSUE) BOW LIMIT 5.0mm PER 3m MAX. HARDNESS: 60-75 VPN, GRAIN SIZE 0.05 mm MAX, FREE FROM GRAIN ORIENTATION

SPECIFICATION IS: 2768 (LATEST ISSUE)

CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150mm + 2 mm/0.00 mm WIDE 1.57mm ± 0.015m Thick, SPECIFICATION IS: 2768 (LATEST ISSUE) OR JSS-4710-1, GR-II, ROLLED ANNEALED IN COIL FORM ID 300mm TO 400mm, WEIGHT 90 TO 110 KG, BOW LIMIT 5.0mm PER 3 Mtrs, HARDNESS: 60-75 VPN, GRAIN SIZE 0.05mm MAX, FREE FROM GRAIN ORIENTATION

SPECIFICATION IS: 2768 (LATEST ISSUE) OR JSS-4710-1, GR-II

TIN Ingots AS PER SPECIFICATION IS: 26/1966 OR BS-3252/1960 SN 99.85% PURE

TIN Ingots AS PER SPECIFICATION IS: 26/1966 OR BS-3252/1960 SN 99.85% PURE

O RING TO DRG NO ARDE 1135 DETAIL NO 21

O RING TO DRG NO ARDE 1135 DETAIL NO 21

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Drg No. SK- 5741*. Die Casting

• Die Casting

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

HARD CHROMIUM PLATING FOR SR-MR "KAVACH" SHORT BARREL

HARD CHROMIUM PLATING FOR SR-MR "KAVACH" SHORT BARREL

HARD CHROMIUM PLATING FOR "KAVACH" BARREL ( POLISHING CHARGES BEFORE AND AFTER HARD CHROMIUM PLATING INCLUSIVE )

HARD CHROMIUM PLATING FOR "KAVACH" BARREL ( POLISHING CHARGES BEFORE AND AFTER HARD CHROMIUM PLATING INCLUSIVE)

PUMPGREASE,HAND,POM POM TYPE B,TO DRG.NO.LV6/MT1-4930-000458

PUMPGREASE,HAND,POM POM TYPE B,TO DRG.NO.LV6/MT1-4930-000458

EXTRACTOR PRIMER,T-2/1015-001828.

EXTRACTOR PRIMER,T-2/1015-001828.

EXTRACTOR BOMB,T-2/1015-001829.

EXTRACTOR BOMB,T-2/1015-001829.

CASE BOMB EXTRACTOR 1A,T-2/1015-001997. ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:191.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

CASE BOMB EXTRACTOR 1A,T-2/1015-001997. ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:191.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

RUBBER BAND, 13MM Width,150 MM Circumference for BP Jaguar

ADRDE/540-A-5(a) and ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018 with ADRDE Agra letter No. ADRDE/QMS/TG(TE)/24 dated 30/09/2019.

• As per specification/drawing

• As per specification/drawing

HAEMATITE IRON ORE.GRADE 61/63 LUMPS SIZE-50 MM TO 100 MM AS PER IS-5442-1992

AS PER OFM SPECIFICATION

TAPE TEXTILE NYLON 14 MM BS 230 KG

JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280 (2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1

• As per Specn/Drawing

• As per Specn/Drawing

TAPE TUBULAR NYLON 27 MM BS:1600 KG

NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019

TAPE NYLON 26 MM MEDIUM U D BS 700 KG

ADRDE/ SPECN/65

GASKET TO DRG NO CQA/WPN/1766/2.

GASKET TO DRG.NO.CQA/WPN/1766/2.

GASKET SPONE PLATE TO SPECN: IND/ME/645 (a) SIZE : 5MM X 162MM X 101MM.

GASKET SPONE PLATE TO SPECN: IND/ME/645 (a) SIZE : 5MM X 162MM X 101MM.

GASKET SPONGE PLATE TO SPECN:IND/645(a) SIZE : 5MM X 78MM X 346MM.

GASKET SPONGE PLATE TO SPECN:IND/645(a) SIZE : 5MM X 78MM X 346MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE : 5MM X 101MM X 165MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE : 5MM X 101MM X 165MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE : 5MM X 18MM X 2370MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE : 5MM X 18MM X 2370MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE 5MM X 19MM X 110MM.

GASKET SPONGE PLATE TO SPECN:IND/ME/645(a) SIZE 5MM X 19MM X 110MM.

GASKET TO DRG NO CQA WPN 1761 1

GASKET TO DRG NO CQA WPN 1761 1

PUMPGREASE,HAND,POM POM TYPE B,TO DRG.NO.LV6/MT1-4930-000458

PUMPGREASE,HAND,POM POM TYPE B,TO DRG.NO.LV6/MT1-4930-000458

EXTRACTOR PRIMER,T-2/1015-001828.

EXTRACTOR PRIMER,T-2/1015-001828.

EXTRACTOR BOMB,T-2/1015-001829.

EXTRACTOR BOMB,T-2/1015-001829.

CASE BOMB EXTRACTOR 1A,T-2/1015-001997. ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:191.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

CASE BOMB EXTRACTOR 1A,T-2/1015-001997. ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:191.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

GROMMET WITH WASHER 18 MM DIA

ADRDE/2004/03(a)

ADRDE/2004/03 (a)

• As per Drawing/Specification

• As per Drawing/Specification

BUSH TO DRG NO M2 BOF 6105892

BUSH TO DRG NO M2 BOF 6105892

6105892

BUSH TO DRG. NO. M2/BOF-6105892

BUSH TO DRG. NO. M2/BOF-6105892

DRG. NO. M2/BOF-6105892

LIFTING SLING (WIRE ROPE/ NYLON WEBBING/ NYLON CORD) WITH O RING 4 LEG

2 X 2.5 M AND 2 X 2 M COMPLETE WITH LATCHED SWIVEL HOOKS (LOAD TESTED AT 300 KG PER LEG)

TYRE PNEUMATIC 8.25X19,PLY RATING 10 NYLON ADV.PATTERN (M/S DUNLOP INDIA LTD./ M/S MRF LTD./ EQUIVALENT APPROVED SOURCES) OR CAT PT.NO.2610-000305,2610-001474 TYRE PNEUMATIC 8.25X19 PLY RATING 10 NYLON CROSS COUNTRY PATTERN 2530- 004760 WHEEL DETACHABLE.

TYRE PNEUMATIC 8.25X19,PLY RATING 10 NYLON ADV.PATTERN (M/S DUNLOP INDIA LTD./ M/S MRF LTD./ EQUIVALENT APPROVED SOURCES) OR CAT PT.NO.2610-000305,2610-001474 TYRE PNEUMATIC 8.25X19 PLY RATING 10 NYLON CROSS COUNTRY PATTERN 2530- 004760 WHEEL DETACHABLE.

ST.SQR.150MM TO SPCN.BS:3S144:1995(99)SUPPLY CONDN.Gd.S144D TESTCONDN.S144H LFVD WITH CAL.SILICATE TREATMENTSULPHUR0.015 MAX.PHOS.PHOS.0.03MAX,INCLU.RATING NOT EXCEED THEFOLLO.LIMIT SECON.REFINING STEEL AS PER THE SPECN.IS:4163-82 i.e.THN/THK SULPHIDE1.5-1ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAROXIDE2.0-1

ST.SQR.150MM TO SPCN.BS:3S144:1995(99)SUPPLY CONDN.Gd.S144D TESTCONDN.S144H LFVD WITH CAL.SILICATE TREATMENTSULPHUR0.015 MAX.PHOS.PHOS.0.03MAX,INCLU.RATING NOT EXCEED THEFOLLO.LIMIT SECON.REFINING STEEL AS PER THE SPECN.IS:4163-82 i.e.THN/THK SULPHIDE1.5-1ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAROXIDE2.0-1