OUTER COMPONENT FOR GLOVES LEATHER WHITE LINED (LARGE SIZE)

JSS:8415-09:2000 (REV. NO. 2)REAFFIRMED -2008

PLYWOOD FOR GENERAL PURPOSE GR MR/AA 7- PLY X 12 MM

SIZE: 1456 MM X 829 MM X 12 MM THICK

IS:4741-1968

IS:4741-1968

BUCKLE ALUMN. ALLOY Q.R. 19MM BLACK ANODISED

AS PER DRG. NO. SK-886 AND CQA(GS)/US/324 (5653/PK).

TAPE POLYESTER KHAKI (FOR NET MOSQUITO R/M POLY.KHAKI WITH CALICO BORDER) ONE SET CONSISTING OF :

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

MIMOSA POWDER

AS PER SPECIFICATION

IS:265-1993(REAFF:2010)(IV REVISION) LATEST ISSUE

IS:265-1993(REAFF:2010)(IV REVISION) LATEST ISSUE

COLOUR NOT DARKER THAN SOLN.OF 0.003GMS.OF K2CR207 IN 1 LIT OF WATER DIST.RANGE:AS PER ASTM 130-145 DEG.C FLASH POINT:76DEG MIN. COPPER CORROSION:NIL BENZENE & TOLUENE: 2% MAX. NONAROMATIC HYDROCARBONS: 9% MAX. ETHYL BENZENE:20%AMX. P-XYLENE:23% AMX. M-XYLENE:50% MIN O-XYLENE:8% MAX

SPECN . HEF/IO/68 DT 22.12.1995

WOOD FOR PACKING 10 KGS. CARTRIDGE PEK-I 100 GMS A (INCARTONS) AS PER DRG NO. IND/ME/55 WITH DC NO. 3565-ME DT 12.03.99

IND/ME/883(F) PROV.98DC NO. 3539-ME DT 01.06.2016 DRG. NO. HEF/5038

SPECN NO. IND/ME/748 (b), D.C. NO. 2144-ME DT 19.10.1977 (NATURAL RUBBER) (LATEST ISSUE)

SPECN NO. IND/ME/748 (b), D.C. NO. 2144-ME DT 19.10.1977 (NATURAL RUBBER) (LATEST ISSUE)

AMMUNITION TO SPECN JSS-9160-05-2016 (REV NO.3) DC 5475 -ME DT. 24.09.2016

AMMUNITION TO SPECN JSS-9160-05-2016 (REV NO.3) DC 5475 -ME DT. 24.09.2016

JSS 8030-09:2010 REV NO.2 (D.S CAT NO. 8030-000032) DC 3744-ME DATED 17.09.2002

JSS 8030-09:2010 REV NO.2 (D.S CAT NO. 8030-000032) DC 3744-ME DATED 17.09.2002

IND/ME/1011 (PROV) MARCH 2000 DC NO. 3607-ME DATED 13.03.2000 (LATEST ISSUE)

IND/ME/1011 (PROV) MARCH 2000 DC NO. 3607-ME DATED 13.03.2000 (LATEST ISSUE)

LEATHER BUFFALO CURRIED BACK MEDIUM COMPLETE

IS: 580 LATEST.

POLY URETHANE FOAM 8 MM THICK X 90 CM X 190 CM .

AS PER APPENDIX "G" OF IND/TC/3844(a)

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

ISC-220 TO IS:5-1994 (4th REV.) AMENDMENT NO. 1

LATEX FOAM 10.00MM THICK X 0.6 M X 1.6 M

IS:1741-1960 & APPENDIX "G" OF IND/TC/3844(a).

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PAINT RFU WAR EQUIPMENT AIR DRYING BRUSHING/SPRAYING O.G.MATT FINISH,SCAMIC ISC NO.294 ALONGWITH THINNER PETROLEUM HYDROCARBON SOL. LOW AROMATIC 145/205 GD

IS:8982-1991, 1ST REV.

SELLA FAST DYE BLACK IG(TFL)/LUGANIL BLACK FB-NT(BASF)/MELJODERM BLACK AF- 135P( STAHIL)

AS PER SPEC

IS - 266 -1993 REAFF 2010

IS - 266 -1993 REAFF 2010

LIGHT GRADE TO SPECIFICATION : IS. 251-1998(IV REVISION) REAFF 2010

LIGHT GRADE TO SPECIFICATION : IS. 251-1998(IV REVISION) REAFF 2010

JSS 6810 - 85 - 2011 (REV NO.2) DC. NO. 5057-ME DT 12.12.2011 (LATEST ISSUE)

SS 6810 - 85 - 2011 (REV NO.2) DC. NO. 5057-ME DT 12.12.2011 (LATEST ISSUE)

COAL SIZE 5 KGS LUMP MINIMUM

COAL SIZE 5 KGS LUMP MINIMUM

PACKING 25 KGS OF RDX/TNT 60/40 & 23 KGS OF CE, TNT TO DRG. NO. HEF/5038 & TIMBER MATERIAL TO SPECN.IND/ME 883 PROV.98, DC NO. 3539 ME DT 24.10.98 (LATEST ISSUE)

DRG. NO. HEF/5038 & TIMBER MATERIAL TO SPECN. HEF/IO/TC&N/10/DT.16/10/2006

DRG NO. CQA (ME) IND/ME/9

DRG NO. CQA (ME) IND/ME/9

TO USE FOR MANUFACTURE OF EXPLOSIVES TO SPECN : IS :170-2004 (REAFF .2011) (4TH REV) (LATEST ISSUE)

IS :170-2004 (REAFF .2011) (4TH REV) (LATEST ISSUE)

TAPE ADHESIVE FABRIC W/P MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

TAPE ADHESIVE FABRIC W/P MM WIDE IN ROLLS OF 50 METERS LENGTH. SPECN NO. IND/ME/790(A) DC 3754-ME (LATEST ISSUE)

COTTON SEWING THREAD 165 D TEX/27 O.G.

AS PER REQUIREMENT AND SPECIFICATION

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

Eyelet Aluminium Alloy Chemically Passivated No. 28 with Turn Over Washer

IS:4084-1978 (1st Revision) (Amendment No.-2) Reaffirmed 1991 & Supply Schedule No. CQA(GS)/SS/335

AS PER DRG. ATTACHED TO SPECN. NO.IND/TC/3838(J) (5511/PK DT

AS PER DRG. ATTACHED TO SPECN. NO.IND/TC/3838(J) (5511/PK DT

IS: 1259-1984 GRADE II EXCEPT THE FOLLOWING

IS: 1259-1984 GRADE II EXCEPT THE FOLLOWING

TRADE FABRICATION OF NET MOSQUITO R/M POLY KHAKI WITH CALICO BORDER

AS PER REQUIREMENT AND SPECIFICATION

TRADE FABRICATION OF BAG KIT UNIVERSAL WITH PV DOPE DYED FABRIC OG

FABRICATION OF BAG KIT TO BE CARRIED ON AS PER SPECN. NO.

JSS-8305-11-2007 (REV.NO. 1) EXCEPT THAT IN PLACE

JSS-8305-11-2007 (REV.NO. 1) EXCEPT THAT IN PLACE

BOX FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY OFF SIZE (INTERNAL DIMENSION)640 MM X 420 MM X 510 MM

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

CIA/AMN/2158PT ISV 1740

CIA/AMN/2158PT ISV 1740

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

ISV 862 DCI-36

ISV 862 DCI-36

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

CQA 9A) 2303 (f) DC NO. 36747-A DT 05.03.2001 DRG NO. ITV 6A DC NO. 36747-A DT-09-03-2001

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.

CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.

DRG.NO.RFI SK.NO.6431*4

TRIGGER FOR 30-06 SPORTING RIFLE DRG. NO. TSP-706

STEEL BS: 970, 070 M55 (EN 9)

DRG. NO. TSP-706

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

RFI SK. 7637*2

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A

CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A

CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

ANTISTATIC PACKING PIECES CONSISTING OF (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

(1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. GOLDEN YELLOW. ISC 356 OF IS:5 2007 (LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 VI REV WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 VI REV WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50

PAINT READY MIXED AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE RED SIGNAL ISC 537 OF IS : 5-2007 (LATEST ISSUE) SPECN IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90

IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90

READY MIXED PAINT MARKING FOR PACKAGES & PETROL CONTAINERS WHITE SPECN IS: 138-1992 (3RD REV) REAFF 2009 AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 DEGREES TO 50 DEGREES

IS: 138-1992 (3RD REV) REAFF 2009 AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 DEGREES TO 50 DEGREES

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. RED SIGNAL ISC 537 OF IS:5 2007 REAFF 2012 (VITH REV)(LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE

BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE

TAPE NYLON THIN/THICK OG OFF SIZES (FOR SYNTHETIC WEB EQUIPT. IMPROVED VERSION HAVERSACK) ONE SET CONSISTING OF THE FOLLOWINGS

PROV. SPECN.NO.DMSRDE/T&GS/92/403 & JSS:8315-6 FOR TAPE

IS:303-1989, REAFF.-1993, 3RD REVISION, AMDT.1 PLYWOOD MR/AA TYPE

IS:303-1989, REAFF.-1993, 3RD REVISION, AMDT.1 PLYWOOD MR/AA TYPE

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2

IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2

ALUMINIUM ALLOY SHEET SIZE 3 X 900 X 2400 MM.

IS : 737-1986 NS-5 1/4 HARD GRADE 53000 H-1

PAINT RM AIR DRYING BRUSHING MATT FINISH FOR GENERAL PURPOSE OLIVE GREEN. ISC 220 OF IS : 5-2007 REAFF : 2012 (6TH REV) SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90

SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

DESIGN. REF CIA/AMN/1799 DETAIL NO. 8 PART NO. ITW -69 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

DESIGN. REF CIA/AMN/1799 DETAIL NO. 8 PART NO. ITW -69 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A

PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)

PLATE BUTT FOR 30-06 SPR (DRG.NO. TSP-408)

DRG.NO. TSP-408

STRAPPING 13MM WIDEX 0.5MM THICK TENSILE STRENGTH 63 TO 70 KGF/SQR MM (618N/SQRMM TO 686N/SQRMM) BLUE FININSH. COIL IMME-RSED IN ANTIRUST SOLUTION PRIOR TO WRAPPING WITH SUITABLE HESSIAN CLOTH.

APPROX OUTSIDE DIA OF COIL TO BE 650MMXINT DIA 400MM SPECN IS5872-1990(LATEST) REVISION IIND REAFF : 2010

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

AMMUNITION PROTECTIVE COMPOSITION NO 2 (CEMENT RD 1192 K AMMUNITION)

SPECN JSS 8030-14-2009 (REVISION NO.3) DC 4054-ME, DT 08.01.2010

AMMUNITION PROTECTIVE COMPOSITION NO.10(LUTING THIN MK-5) SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

GAS TO BE SUPPLIED IN FIRM'S CYLINDERS

HEF/IO/64 DATED 21.12.1995 ELECTROLYTIC GRADE (FROM ELECTROLYSIS OF WATER)

PRITHVI AIR VERSION (P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)

RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 &ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)

SPEC. HEF/IO/68B DT 25.04.08 (A) CLEAR LIQUID (B) SP.GR.AT 20DEG CENT.MAX.0.73 (C)TEA CONTENT 98.5% MIN. (D)WATER INSOL.MIX OF TEA & WATER IN 1.1 RATIO BY VOL.&COOLED TO 18 DEG.CENT SHOULD BE COMPLETELY MISCIBLE (E) DIST.RANGE 85-91 DEG.CENT MIN 95% (F)WATER CONTENT LESS THAN 0.1% (BY KARL FISHER METHOD)

HEF/IO/68B DT. 25.04.08

JSS SPEC. NO. JSS: 9135-02 CONFORMING TO IS 10332

JSS SPEC. NO. JSS: 9135-02 CONFORMING TO IS 10332

JSS SPEC NO. JSS : 9135-02 CONFORMING TO IS 798

JSS SPEC NO. JSS : 9135-02 CONFORMING TO IS 798

LAMINATED CLOTH HESSIAN 102 CM WIDE

SPECIFICATION NO. : IND/TC/2123(b)

• As per Specification

• As per Specification