Steel Strip to Size: 0.62MM (+0.06mm/-0.00) thick X 218MM (+0MM/-2MM) Wide x 900MM(+5MM/-0MM) long matl specn steel to IS:1570C 15 quality having best surface in cold rolled and annealed condition and carbon percentage 0.20% max (for manufacturing of Tail Cone as per Drg. No. SK 9752)
Specification
Steel Strip to Size: 0.62MM (+0.06mm/-0.00) thick X 218MM (+0MM/-2MM) Wide x 900MM(+5MM/-0MM) long matl specn steel to IS:1570C 15 quality having best surface in cold rolled and annealed condition and carbon percentage 0.20% max (for manufacturing of Tail Cone as per Drg. No. SK 9752)
Drawing no.
SK 9752
Manufacturing Technology
Testing / Inspection Facility
65
3.6305
Metric tonne(1000kg)
33682
110170641
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
TAPE COTTON 19 MM OG SPECIAL IS : 3255-1979 Except that :-
(i) The specified Picks Density is minimum.
(ii) The Density of Weft Yarn may be halved and Picks density (minimum) double in case of Needle Loom manufacturing.
(iii) In appearance shade, finish & in all other respect not defined in this IS Specn. The material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur.
(iv) There shall be no presence of starch.
(v) Scouring loss Mild method is to be followed in lieu of severs method and shall not exceed 2.0% (Two percent).
(vi) 100% Sampling Testing & Inspection will be resorted to. Sampling plan as per annexure (a) attached. Packing and marking as per schedule CIT&C/PMS/65.
PIN AXIS LINK TO DS CAT NO.5315-009176 (LT.DC-22745-SA DATED6-12-94).MACRO ETCH TEST WILL BE AS PER COL.(D)OF SL.NO.1 OFCQA(SA) NOTE SHEET NO.1.FOR PISTOL AUTO 9MM.1A
PIN,RETAINING NUT TO DS CAT NO. 5315-009178 ( LT.DC-23308-SADT.08-4-96 ).MACROETCH TEST WILL BE AS PER COL.(D)OF SL.NO.1OF CQA(SA) NOTE SHEET NO.1FOR PISTOL AUTO 9MM.1A
PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OFSL.NO.1,SL.NO.2 & SL.NO.3 RESPECTIVELY(AS THE CASE MAY BE)
Specification
PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OFSL.NO.1,SL.NO.2 & SL.NO.3 RESPECTIVELY(AS THE CASE MAY BE)
EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1)FOR PISTOL AUTO 9MM 1A.
Specification
EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1)FOR PISTOL AUTO 9MM 1A.
PIN FIRING TO RFI SK NO.4746[DS CAT.1005-003204(DC-26824-SA)(NMIR TEST AS PER IS-4163-82 WITH ACCEPTANCE STD. BETTERTHAN 3 THIN 1 THICK SERIES FOR A, B, C, D)FOR PISTOL AUTO 9MM 1A
PIN SEAR TO DS CAT.NO.5315-009179( DC-26585-SA DT.16-04-11 )MACROETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL. NO.3 OFCQA(SA) NOTE SHEET NO.1. (FOR PISTOL AUTO 9MM.1A)
LINK HAMMER TO DSCATNO.3040-003489(LT.DC-25056-SA,DT.2/7/01)( MACROETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1 ) & (NMIR TEST TO IS:4163WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1FOR PISTOL AUTO 9MM 1A
GUIDE SPRING MAIN ASSY.DS CAT NO.5360-007390(LT.DC-25139-SADT.08-10-2001)CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186(DC-26826-SA),2)PLUG GUIDE-1005-003187(DC-26832-SA),3)SPRINGLEVER LOCKING 1005-003188 (DC-26816-SA) & CHROMIUM ALLOYSTEEL BALL 3.97MM DIA. FOR PISTOL AUTO 9MM 1A.
LOCKING PIECE TO DS CAT NO. 1005-003146( LT.DC-24599 SA.DT.27-12-99 )(MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PER COL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1 & NMIR TESTTO IS : 4163 WILL BE AS PER COL.(C) SL.NO.3 OF CQA(SA) NOTESHEET NO.1. FOR PISTOL (AUTO) 9MM 1A.
ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTESHEET NO.1). FOR PISTOL AUTO 9MM.1A
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX†and Clause A-II (Manufacture)†of the Specification shall not be applicable
Specification
OCFS/Blanket Superior OG/Piping/2012, Except that Shade Shall be matching with Pantone No. 19-3933 TPX†and Clause A-II (Manufacture)†of the Specification shall not be applicable
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
Specification
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
As per details given in Plate no.8 of specification no. S/2532/Bag Kit Universal (OG) /TC-6(a) & Conforming to specification no. CQA (GS)/US/426(a) Except size, cadmium plated as per IS: 1572-1986
IS: 4274-1981(Re-affirmed 1996), [ Except for Shape and dimension, which shall be as per Drg. No-OCFAV/Buckle/001(a)
1. Material shall be grade "O" as per specn. No-IS:1079-1074-2.
2. In appearance and Finsih material shall match the sealed sample held in the custody of the controller of customer services, OCF Avadi, Chennai-54
3. Each Pack Shall be 100 NOs. of Buckles.
LDPE SHEET FOR CAP BALACLAVA OG PEAK INTERLINING FOR ALL SIZES SPECN. NO.1 APPENDIX "B " TO JSS.8405 ;25: 2010 REV NO.1 AMD NO.1&2. AND DRAWING AS PER APPENDIX "B" & "D" RESPECTIVELY PROV. SPECN NO. S/5094/TC/-1 (b)/Cap Bal OG(Imp) AS PER ANNEX "A" ATTACHED AS PER CQA(T&C) CAP QAI NO. CQA(T&C)/QAI/99/TC-11
Specification
LDPE SHEET FOR CAP BALACLAVA OG PEAK INTERLINING FOR ALL SIZES SPECN. NO.1 APPENDIX "B " TO JSS.8405 ;25: 2010 REV NO.1 AMD NO.1&2. AND DRAWING AS PER APPENDIX "B" & "D" RESPECTIVELY PROV. SPECN NO. S/5094/TC/-1 (b)/Cap Bal OG(Imp) AS PER ANNEX "A" ATTACHED AS PER CQA(T&C) CAP QAI NO. CQA(T&C)/QAI/99/TC-11
As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a).
Specification
As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a).
