SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C,Kanpur.
SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria for conformity and packing & marking as per CQAT&C/QAS/TC-8/10(a
Specification
SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria for conformity and packing & marking as per CQAT&C/QAS/TC-8/10(a
4020-000298 CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D as per Specification
Specification
SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the material shall conform to the sealed pattern held in the custody of The Controller, CQAT&C, Kanpur (iv) hank length should be 270 + 05. - 00
SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C,KANPUR(iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant
clause of specn.(iv)Pre inspection ,warranty and Advance sample Clause as per specification
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101116225
9193656
Metre
35442
20170563/PV/0832(A)/EOT/D
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
Specification
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT 30X3X2
BINDER-89.3. WEAVE: DOUBLE PLAIN (2ENDS WORKING AS ONE).
TPM RANGE: WARP FACE / BACK (a) FINAL -145 TO 150
(b) INITIAL - 280 TO 320 (c) BINDER -330 TO 340 EXTENSION - 20 - 25%. PROPER HEAT SETTING IS TO BE DONE.
WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)
Specification
SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :104[52(2 PICKS/SHED)
DENIER OF YARN :(a)ENDS:840X3,(b)PICKS:840X2
TPM (RANG):WARP-FINAL:200-210,INITIAL:325-335,WEFT-210-220
EXTENSION:20-30%, WEAVE:2/1 DOUBLE TWILL WEAVE,WEFT INTERCHANGING BETWEEN LAYERS, REVERSAL OF TWILL DIRECTION OCCURS AT 96th & 206th ENDS(TWO ENDS WORKING AS ONE AND TWO PICKS/SHED
Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.----------=158.00 (Max).
PICKS PER dm--------------=196
B.S. IN NEWTON------------=51686 (MIN.)
WEBBING COTTON SPL. 76 MM OG for PP SPECIFICATION NO.(1) JSS-8305-8. (2) SPCN.NO.IND/ADE/0085(f) SAMPLING PLAN & CRITERIA OF CONFORMITY AS PER ANNEXURE I ATTACHED.
Specification
SPECIFICATION NO.(1) JSS-8305-8. (2) SPCN.NO.IND/ADE/0085(f) SAMPLING PLAN & CRITERIA OF CONFORMITY AS PER ANNEXURE I ATTACHED
