Self Adhesive Polythene Bag Size 50 cm x 35 cm Thickness of polythene film 0.04 mm
Specification
Self Adhesive Polythene Bag Size 50 cm x 35 cm Thickness of polythene film 0.04 mm
Specification no. CQA(GS)/US/434(a), Except that the sealing will be "Self Adhesive"
Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm
Specification
Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm
Specification no. CQA(GS)/US/434(a). Except that the sealing will be "Self Adhesive"
MANUFACTURING OF SET OF BEVEL GEARS TO DRG.NO.675-55-162 AND 675-55-164(RAW MATERIAL WILL BE SUPPLIED BY MTPF)AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA WITH ANNEXURE-I&II ATTACHED
Specification
MANUFACTURING OF SET OF BEVEL GEARS TO DRG.NO.675-55-162 AND 675-55-164(RAW MATERIAL WILL BE SUPPLIED BY MTPF)AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA WITH ANNEXURE-I&II ATTACHED
Fin Cylinder Assembly as per Drg. No. SK-9761 (2 sheet) required for Stab. Assy. of Rocket Pinaka (the supplementary drawings are mentioned in this drawing from S.No.1 to 9)
Nozzle Assembly as per Drg. No. SK-9759 (02 sheets). (The supplementary drawing are mentioned in this drawing from Sno-1 to 12) required for stab.assembly of Rocket Pinaka.
1) Appearance - Transparent Liquid
2) Sp. Gr. at 25 Degree Centigrade - 1
3) PH Value - 8.0 to 9.0
4) Water Compatibility - Should be water compatible.
5) Stickness - Non Sticky & Free flowing through narrow tubes of Dia 4mm
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
6881
Litre
36359
0630/PV/TE/20170363 Dtd. 18-12-2017
Ordnance Factory Varangaon
The Cheif General Manager
Varangaon
Varangaon
Maharashtra
425308
BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
Specification
BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification
BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Specification
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Drawing no.
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Drawing no.
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.
Specification
BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.
BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
Specification
BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
Specification
BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90
Specification
BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90
COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification
COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
Specification
BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
Specification
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
Specification
ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.
Specification
COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.
BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
Specification
BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
Drawing no.
BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.
