ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

• as per file attached

• as per file attached

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

• as per file attached

• as per file attached

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

• as per file attached

• as per file attached

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

• as per file attached

• as per file attached

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN

• as per file attached

• as per file attached

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

• uploaded soon

• uploaded soon

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

• as per file attached

• as per file attached

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

• as per attached file

• as per attached file

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

• as per file attached

• as per file attached

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION

• as per file attached

• as per file attached

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

• as per attached file

• as per attached file

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

• 1-Melting Furnace 2-Ingot Casting Facility 3-Desired size rod making Facility (Extrusion/Rolling etc.)

• Relevant Inspection & testing Facility

CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max)

TO BOFORS SPECN:BMK-07-G-55.CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES OFCUPRO NICKEL TUBING ARE FOLLOWS: CHEMICAL COMPOSITION:Cu-92.5 TO 94.5%, Mn-0.5% Max.Ni-5 TO 7% REMAINDER MAX 0.5%.PHYSICAL PROPERTIES: TENSILE STRENGTH-235.36 Mpa Min.ALONGATION (10xd)-30% Min.

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Mi

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa M

• as per attached file

• as per attached file

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

• as per file attached

• as per file attached

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

• as per file attached

• as per file attached

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

• as per file attached

• as per file attached

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa Min,ELONGATION 12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa Min,ELONGATION 12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa

• as per attached file

• as per attached file

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

• as per attached file

• as per attached file

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa Min,ALONGATION-12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa Min,ALONGATION-12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa

• as per attached file

• as per attached file

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIELD STRENGTH S 0.2 32/40KG/mmsq HB 115/135.

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIELD STRENGTH S 0.2 32/40KG/mmsq HB 115/135.

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIEL

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

• as per attached file

• as per attached file

BRASS ROD 17MM BS2874 CZ121 PB3

BRASS ROD 17MM BS2874 CZ121 PB3

• as per file attached

• as per file attached

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

• as per attached file

• as per attached file

BRASS ROD 8MM BS2874 CZ122 'M'

BRASS ROD 8MM BS2874 CZ122 'M'

• as per file attached

• as per file attached

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

• as per attached file

• as per attached file

BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.

BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.

BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.

ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.

ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

• as per file attached

• as per file attached

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

• as per file attached

• as per file attached

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.

ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.

• as per attached file

• as per attached file

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

• as per file attached

• as per file attached

BRASS ROD 4MM BSEN12166 CUZN39PB2

BRASS ROD 4MM BSEN12166 CUZN39PB2

BRASS ROD 4MM BSEN12166 CUZN39PB2

• as per file attached

• as per file attached

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

• as per file attached

• as per file attached

TGG-102, UPPER BLOCK BARREL OF TEAR GAS GUN (LATEST DC RFINO. 09/022/14 DT.27.03.14) FROM TRADE SOURCE.

TGG-102, UPPER BLOCK BARREL OF TEAR GAS GUN (LATEST DC RFINO. 09/022/14 DT.27.03.14) FROM TRADE SOURCE.

DRG. NO. TGG-102

SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL

AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL

MIM K 2065 00

• MACHINING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL

AS PER DRG No. K 5000 WITH FIRMS MATERIAL

K 5000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

K 9024

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

All types of bearings & also plummer blocks and adaptor sleeve for bearings

All types of bearings & also plummer blocks and adaptor sleeve for bearings

ALL TYPES OF AXIAL PISTON PUMPS

ALL TYPES OF AXIAL PISTON PUMPS

ALL TYPES OF INDUCTION MOTOR

ALL TYPES OF INDUCTION MOTOR

LASER PARTICAL COUNTER

LASER PARTICAL COUNTER

PLUG FEMALE SHR28P7ESH9 WITH 'O' RING

GEO 364-107

RECEPTACLE MALE SHRG20P4ESH8 (WITH SPLIT HOOD)

GEO 364-107-TY

PLUG FEMALE SHR20P4ESH8 WITH 'O' RING

GEO 364-107-TY

PLUG FEMALE 2RM14KUEAG1V1 TO BE SUPPLIED WITH 'O' RING

GEO 364-126-TY

PLUG FEMALE SHR20U5ESH10 WITH 'O' RING

GEO 364-107-TY

PLUG MALE SHR16P2EG5

GEO 364-107

RECEPTACLE MALE 2RMDGD18BPE4SH5E4

GEO 364-126 TY

PLUG FEMALE 2RMD36KPE20G6V1 GEO 364-126-TY WITH 'O' RING

GEO 364-126TY

PLUG FEMALE SSHR36P15ESH5 WITH 'O' RING

GEO 364-107-TY

PLUG FEMALE 2RMD33KPE32G5V1 WITH 'O' RING

GEO 364-126-TY

PLUG FEMALE 2RMD27KPE19G5V1 WITH 'O' RING

GEO 364-126 TY

SOCKET 2RM22KPZ10G1V1 DATE OF MANUFACTURING SHOULD BE MENTIONED ON THE PRODUCT. PLUG SHOULD HAVE THREATED DUST COVER ITEM SHOULD NOT BE MORE THAN 2 YEARS OLD

TY 364-126

GEO 364-126 TY

RECEPTACLE MALE SHRG28PK2ESH7

PLUG FEMALE SHR20U3ESH7 WITH 'O' RING

GEO 364-107-TY

PLUG FEMALE 2RMDT18KUE4G5V1 WITH 'O' RING

GEO 364-126-TY

PLUG FEMALE 2RM24KPE19G1V1 WITH 'O' RING

GEO 364-126-TY

PLUG FEMALE SHR32P10ESH1 WITH 'O' RING

GEO 364-107 TY