Nozzle Assembly as per Drg. No. SK-9759 (02 sheets). (The supplementary drawing are mentioned in this drawing from Sno-1 to 12) required for stab.assembly of Rocket Pinaka.

As per Drg. No. SK-9759 (02 sheets)

SK-9759 (02 sheets)

TRADE FABRICATION OF RAIN CAPE MULTI- PURPOSE DISRUPTIVE (PONCHO)

PROV/S/3566/RAIN CAPE MP DIS/TC-15(d) (7197/PK).

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

SPACER FOR FUZE FB40 TO DRG.NO 3690240

SPACER FOR FUZE FB40 TO DRG.NO 3690240

MANOEUVRING BUSH FOR FUZE FB40 TO DRG NO:3690390

MANOEUVRING BUSH FOR FUZE FB40 TO DRG NO:3690390

END CAP FOR FILLING FOR FUZE FB40 TO DRG.NO:3690040

END CAP FOR FILLING FOR FUZE FB40 TO DRG.NO:3690040

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

SPECN. NO. ADRDE/QMS/TDTM/T/2009/02.

SPECN. NO. ADRDE/QMS/TDTM/T/2009/02.

FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM ADRDE/SPECN/1985/28(c)

ADRDE/SPECN/1985/28(c)

SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...

SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...

Tape Cotton, Medium 1/4" wide

Mould Proofed, To Specn. :- IND/ME/888 DC No. 5405-ME Dtd. 01-02-2016

Degreasing Chemical OFV/INS/SPECN/B&P CHEM/01

1) Appearance - Transparent Liquid 2) Sp. Gr. at 25 Degree Centigrade - 1 3) PH Value - 8.0 to 9.0 4) Water Compatibility - Should be water compatible. 5) Stickness - Non Sticky & Free flowing through narrow tubes of Dia 4mm

Oil Olive (Pure)

Oil Olive Pure Figaro Brand Spanish Make

Phosclean NF

Test Clause : 1) Appearance - White to light yellowish powder with flakes, 2) Total alkalinity as NaOH - 40%, 3) Free alkalinity as NaOH - 30%, 4) Surface Tension dyne/cm2 - of 1% solution 37.5 -47.5 5) Foam Height (ml) of 1% solution - 100ml minimum

SOLID TYRE FOR FORK LIFTER

SOLID TYRE FOR FORK LIFTER

Cock Distribution Assy. to Drg. No. 188-66-015CD-1

Cock Distribution Assy. to Drg. No. 188-66-015CD-1

Drg. No. 188-66-015CD-1

Forged Proof Machined Blank Heat Treated for Ring as SK-9042/B

As per Drg. No. SK-9042/B

SK-9042/B

Moulding of Nozzle Rear As Per Drg.No.8737/D

As per Drg. No. SK- 8737/D

SK- 8737/D

Nozzle Front Moulding as per Drg. No. SK-8736/F

As per Drg. No. SK-8736/F

SK-8736/F

O RING-2 TO DRG NO. AFK/SK-630-09 FOR 40 MM MGL AMMN.

O RING-2 TO DRG NO. AFK/SK-630-09 FOR 40 MM MGL AMMN.

DRG NO. AFK/SK-630-09

O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.

O RING-1

AFK/SK-611-09

SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.

SET BACK SPRING(STARLET) TO DRG.NO. AFK/SK-631-09 FOR 40 MM MGL AMMN.

BEST TRADE QUALITY & AS PER SEALD SAMPLE

BEST TRADE QUALITY & AS PER SEALD SAMPLE

BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"

BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"

BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"

• as per file attached

• as per file attached

BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.

BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.

• as per file attached

• as per file attached

ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN

ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN

• as per file attached

• as per file attached

BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120

BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120

• as per file attached

• as per file attached

ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN

ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN

• WILL BE UPLOADED

• WILL BE UPLOADED

BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)

BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)

• as per file attached

• as per file attached

BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90

BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90

BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90

• as per file attached

• as per file attached

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

• as per file attached

• as per file attached

BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.

BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.

• as per file attached

• as per file attached

BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.

BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.

• as per file attached

• as per file attached

BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.

BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.

• as per file attached

• as per file attached

BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90

BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90

• as per file attached

• as per file attached

COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.

COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.

BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.

• as per file attached

• as per file attached

BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.

BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.

• as per file attached

• as per file attached

BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).

BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).

• as per file attached

• as per file attached

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

• as per file attached

• as per file attached

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

• as per file attached

• as per file attached

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

• as per file attached

• as per file attached

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

• as per file attached

• as per file attached

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

• as per file attached

• as per file attached

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

• as per file attached

• as per file attached

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

• as per file attached

• as per file attached

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

BRASS STRIP 66+/-0.38 MM WIDE X 0.20-0.02 MM (34 SWG) THICK TO SPECN: IS-410-1977 (3rd REVISION) RA 1996 GRADE CUZN37

• as per file attached

• as per file attached

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

• as per file attached

• as per file attached

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

• as per file attached

• as per file attached

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN

• as per file attached

• as per file attached

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"

ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

• uploaded soon

• uploaded soon

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

• as per file attached

• as per file attached

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

• as per attached file

• as per attached file

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

• as per file attached

• as per file attached

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION

• as per file attached

• as per file attached

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

• as per attached file

• as per attached file

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

• 1-Melting Furnace 2-Ingot Casting Facility 3-Desired size rod making Facility (Extrusion/Rolling etc.)

• Relevant Inspection & testing Facility

CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max)

TO BOFORS SPECN:BMK-07-G-55.CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES OFCUPRO NICKEL TUBING ARE FOLLOWS: CHEMICAL COMPOSITION:Cu-92.5 TO 94.5%, Mn-0.5% Max.Ni-5 TO 7% REMAINDER MAX 0.5%.PHYSICAL PROPERTIES: TENSILE STRENGTH-235.36 Mpa Min.ALONGATION (10xd)-30% Min.

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Mi

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa M

• as per attached file

• as per attached file

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

• as per file attached

• as per file attached

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

• as per file attached

• as per file attached

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

• as per file attached

• as per file attached

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

• as per file attached

• as per file attached