TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845)

TITANIUM ALLOY ROD DIA -45 AS PER IS:11902-86 GR-G (LF : 9927094845)

STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680)

STEEL SHEET TOOL ALLOY 16.0 MM THICK TO SPCN IS: 3749 T-110 W6CR4 (LF : 9927094680)

STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904)

STEEL TUBE TO SPCN IS:3601:84 GR CDS-240, OUTER DIA 70 MM X WALL THICKNESS 10 MM (LF : 9927093904)

STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899)

STL TUBE OUTER DIA 40 MM X 9 MM WALL THICKNESS IS : 3601-84 GRCDS-240 COND "NORMALISED" IN RUNNING LENGTH OF 2 TO 3 MTRS. (LF : 9927093899)

TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413)

TITANIUM UNALLOY ROD, 55MM DIA OST-1-90013-80 GRADE VTI OR IS:11902, GRADE "B" IN RUNNING LENGTH OF 2 MTRS (LF : 9927087413)

STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605)

STEEL STAINLESS WIRE 1.6MM AS PER SPCN IS:6603-01 GR. X 04CR18NI10TI IN THE STANDARD RUNNING LENGTH (LF : 9927085605)

BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939)

BRASS ROUND BAR 80MM DIA +/- 0.2, TO SPCN. IS:319, TYPE-I, 1/2H IN RUNNING LENGTH OF 1.5 TO 3.0 MTRS. (LF:9927076939)

BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231)

BRASS ROUND BAR 105 MM DIA TO SPCN. IS:319 TYPE-I 1/2 (HARD) IN RUNNING LENGTH OF 1 TO 1.5 MTRS (LF : 9927074231)

SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196)

SILICON BRONZE GR. CS-101, SIZE 0.5T X 200 X 1000 MM BS 2870:80 (LF: 9927074196)

STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672)

STAINLESS STEEL SHEET 1.4 MM THICK X 700 MM WIDTH TO SPCN IS:6911 : 1992 GR. X 04CR19NI9 IN THE STANDARD RUNNING LENGTH (LF: 9927073672)

STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604)

STEEL LOW CARBON FREE CUTTING ROUND STEEL BRIGHT BAR 10.0 MM TO SPCN IS:7283-92 GR. 10C8S10 OF IS:4431-78 (LF:9927073604)

STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

STEEL BRIGHT BAR DIA 3.0 MM TO SPCN IS:7283-92, GR10C8S10 OF IS:4431-78 (LF: 99227073600)

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

SPRING STEEL SHEET SIZE 0.50MM THICK TO SPCN IS:2507, 80C6 IN RUNNING LENGTH 1 TO 2 MTR. X 0.500 WIDE

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

AL. ALLOY SHEET SIZE 0.8MM THICK TO SPCN IS:737, GR. 24345, INWP CONDITION X 500 MM W X 2500 MM LONG (LF:9927073485)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

TOOL STL. SHT. AS PER IS:3748:90, GR. 80T3, 12MM TH. X 500MM WIDE X 2 MTRS. AND ABOVE (LF:0202002012)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET 25MM THICK X 250MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8, (LF:0143022026)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

MEDIUM CARBON STEEL SHEET SIZE 20MM THICK X 300 MM WIDE X 1000 MM LONG (MINIMUM) TO SPCN IS:5517, GR. 45C8 (LF:0143022020)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL SHT. GR. 'DD' IS513:94 SIZE 1MM THICK X 300 X 1000 MM (LF: 0133023010)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

STEEL ROD DIA 15MM GR. 14C14S14 TO IS 4431:78 (LF-0131002016)

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

HAMMER FOR 12 BORE PAG, DRG.NO. PAG-0060A THROUGH MIM ROUTE

DRG.NO. PAG-0060A

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

TRIGGER FOR 12 BORE PAG, DRG.NO. PAG-0033 THROUGH MIM ROUTE

DRG.NO. PAG-0033

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

BREECH SLIDE LOCKFOR 12 BORE PAG, DRG. NO. PAG-0027 THROUGH MIM ROUTE

DRG. NO. PAG-0027

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

BREECH BLOCK SLIDE FOR 12 BORE PAG, DRG.NO. PAG-0065B THROUGH MIM ROUTE

DRG.NO. PAG-0065B

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

MAGAZINE CAP FOR 12 BORE PAG, DRG.NO. PAG-0018 THROUGH MIM ROUTE

DRG.NO. PAG-0018

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

TRIGGERING PIN CATCH FOR 12 BORE PAG, DRG.NO. PAG-0038 THROUGH MIM ROUTE

DRG.NO. PAG-0038

STEEL ROD 15MM DIA HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED. IN STRAIGST LENGTH. FOR PIN FIRING OF TGG.

SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.

STEEL ROD 8MM DIA, HR, ANNEALED COND. TO SPECN. BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED.IN STRAIGHT LENGTH, FOR PIN FIRING OF PAG & 0.32" PISTOL.

BS:970, PT1 1983 GD. 835 M-30 (EN-30B)

STEEL ROD 6 MM DIA CD., 2M OR 2.5M STRAIGHT IN LENGTH TO BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED. FOR PIN FIRING OF 7.62 MM RIFLE GHATAK.

BS: 970, PT-I,1983 GD.835, M-30(EN-30B). VACCUM DEGASSED.

STEEL ROUND 4 -0.1MM DIA. HR, ANNEALED COND. TO SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED, IN STRAIGHT LENGTH 2 TO 3 M LONG.

SPCN.BS:970, PT1 1983 GD. 835 M-30 (EN-30B) VACCUM DEGASSED,

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

PROV. SPECN.NO. DMSRDE/T&GS/2005/NBC/02(a)

Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Arm to Casting Drg. No. D-4082388

As per Drg. No. D-4082388

D-4082388

Holder to investment casting to Drg . No. D-4082393/1

As per Drg . No. D-4082393/1

D-4082393/1

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

IND/ENG/PROV/0732(a)

IND/ENG/PROV/0732(a)

IND/ENG/PROV/1221/a

IND/ENG/PROV/1221/a

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

• uploaded soon

• uploaded soon

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR SET OF CARRIER 4A/L AND CARRIER 5A/L IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 SETS ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR SET OF CARRIER 4A/L AND CARRIER 5A/L IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 SETS ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEE

• as per file attached

• as per file attached

CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM.

CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM.

CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR

• (i) RUBBER MIXING MILL & KNEADING MACHINE (II) EXTRUDER M/C (III) PULVARIZING M/C (IV) ROTO MOULDING/ INJECTION MOULDING M/C (V) GRINDER (VI) DRILL M/C

• (VII) OTHER RELEVANT INSPECTION & TESTING FACILITIES

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

• WILL BE UPLOADED

• WILL BE UPLOADED

SPEEDOMETER ELECTRIC TYPE SP 106 CONSISTING OF SPEEDOMETER INDICATOR & SPEEDOMETER SENDING UNIT DRG No: 700-76-K-418

SPEEDOMETER ELECTRIC TYPE SP 106 CONSISTING OF SPEEDOMETER INDICATOR & SPEEDOMETER SENDING UNIT DRG No: 700-76-K-418

700-76-K-418

FAN 773-82-CB106

FAN 773-82-CB106

773-82-CB106

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

• attached

• attached

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)

• as per file attached

• as per file attached

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

• as per file attached

• as per file attached

SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 7040 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

AS PER DRG NO K 4110 WITH FIRM'S MATERIAL

K 4110

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

• as per file attached

• as per file attached

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

• as per file attached

• as per file attached

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILAT

• as per file attached

• as per file attached

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATI

• as per file attached

• as per file attached

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

• as per file attached

• as per file attached

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

• as per file attached

• as per file attached

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIV

• 1.Sheet Metal work facility 2.Drill/ Punching M/c 3.Riveting facility 4.Welding M/c 5.Surface coating facility 6.Painting facility 7. Other relevant inspection & testing facility

• 1.Sheet Metal work facility 2.Drill/ Punching M/c 3.Riveting facility 4.Welding M/c 5.Surface coating facility 6.Painting facility 7. Other relevant inspection & testing facility

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEI

MASK AK-630 ASSY. 103

MASK AK-630 ASSY. 103

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006

Casting for Cover of Suction Pump to Drg. No. 172 46 007 1 2

Casting for Cover of Suction Pump to Drg. No. 172 46 007 1 2

Drg. No. 172 46 007 1 2

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

DEVELOPMENT, MANUFACTURE, SUPPLY AND PROVING OF THE 29 SUB ASSEMBLIES OF HYDRAULIC SYSTEM FOR 155 MM GUN

POWER UNIT (FEED UNIT) AK-630 ASSY.107

POWER UNIT (FEED UNIT) AK-630 ASSY.107

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Slide to Casting Drg No. D-6385161

Slide to Casting Drg No. D-6385161

D-6385161

Feeder Lever ( Investment Casting) Drg No. D-5178461

Feeder Lever ( Investment Casting) Drg No. D-5178461

D-5178461

Housing to Casting Drg No. D-5178463

Housing to Casting Drg No. D-5178463

D-5178463

Arm to Drg No. D-6358150

Arm to Drg No. D-6358150

D-6358150

Case investment casting Drg No. D-3053751

Case investment casting Drg No. D-3053751

D-3053751

Magazine Cover Drg No. D-3054626

Magazine Cover Drg No. D-3054626

D-3054626

Arm to Investment Casting Drg No. D-4082394

Arm to Investment Casting Drg No. D-4082394

D-4082394

Arm to investment casting Drg. no. D-4082416

As per Drg. No. D-4082416

D-4082416

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

• MSME

• WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

White Colour To Specn.No.CS-5301-B

White Colour To Specn.No.CS-5301-B

• MSME

• White Colour To Specn.No.CS-5301-B

WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

• MSME

• WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

• MSME

• WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.