TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
Specification
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
Drawing no.
Manufacturing Technology
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
Specification
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
Specification
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
Specification
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
Specification
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
Specification
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
Specification
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
Specification
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
Specification
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
Specification
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
Specification
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
Specification
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
Specification
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
10
166.890
Litre
36722
107MMETT17002139
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION
Specification
STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION
GLASS SLAB BF-108 SIZE:MULTIPLE OF 50 X MULTIPLE OF 50 MM X
50 MM,MAXIMUM SLAB SIZE = 350 X 300 X 50 MM,RADIATION
RESISTANT GLASS, REFRACTIVE INDEX ND = 1.582713,ABBE VALUE
VD=46.47,OTHER CHARACTERISTICS AS PER SPECN NO. OLF/OPT-GLASS/
SPEC/03-2.DENSITY=3.28 GM/CC.
ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001. & NITROGEN CONTENT SHOULD BE RESTRICTED TO 50 PPM.).
Specification
ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001. & NITROGEN CONTENT SHOULD BE RESTRICTED TO 50 PPM.).
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
07
513
Metric tonne(1000kg)
36728
MPF/PV/17TE210780/2017
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
IND/ADE/0087 (a) Except That
1-Weight, gsm – A tolerance of +-10% shall be applicable to 407 gsm after waterproofing.
2-Count of yarn :-Warp :-2 ply of 20s Single yarn
Weft :-3 ply of 24s Single yarn
(Note: The count of single yarn is approximate and given for the guidance of the manufacturers. The no. of plies, however, shall not be changed.)
3-No. of threads/ inch:- Warp:-92 Weft:-48
(The tolerance in no. of threads/inch shall be +- 5%)
4-Shade OD (Olive Drab), Shade No. 298 as per IS:5
1. Button made from Polyester
2. Buttons made from Plastic
Specification
As per Specification No. IS:1461-1984 (reaffirmed 2003)
in various sizes and shapes as per requirement with material - Plastic or Polyester as per requirement specified.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
AS PER REQUIREMENT
Hundred
36742
RFI/OTE/ATH0820038,39/2017
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Transportation of Aluminium Ingots from National Aluminium Co Ltd Bhubaneshwar, NALCO Nagar Angul to Ordnance Factory Ambajhari Nagpur in 16 MT Capacity Truck
Specification
Transportation of Aluminium Ingots from National Aluminium Co Ltd Bhubaneshwar, NALCO Nagar Angul to Ordnance Factory Ambajhari Nagpur in 16 MT Capacity Truck
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
11
998.487
Metric tonne(1000kg)
36745
IS2170284
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
Workshop Apron Cotton Drill Navy Blue confirming to IS 177 1989 4th revision with Two Pockets Lower side, Coat type collar, Half Sleeves, Double Stitching and interlock as per Annexure
Specification
Workshop Apron Cotton Drill Navy Blue confirming to IS 177 1989 4th revision with Two Pockets Lower side, Coat type collar, Half Sleeves, Double Stitching and interlock as per Annexure
