ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS.
Specification
ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS.
FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: QX-244 GE,DC NO. 31398-A,DT.10.02.75. (REF.DRG.FUZE PERCUSSION DA NO.117 EMPTY MK 20 ITEM LIST FOR QX 244 GE DCI-31398-A DT.10.02.75)
Specification
FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: QX-244 GE,DC NO. 31398-A,DT.10.02.75. (REF.DRG.FUZE PERCUSSION DA NO.117 EMPTY MK 20 ITEM LIST FOR QX 244 GE DCI-31398-A DT.10.02.75)
CLIPS, 25.41MM(L)X13MM(W)X0.3MM(T) SEAL TIN(FOR STEEL TAPE BANDING SIZE 13MM WIDE) APPROX. SIZE 25.41MM LENGTH X 12.7MM WIDTH X 0.3MM THICK AND BAND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3MM.
Specification
CLIPS, 25.41MM(L)X13MM(W)X0.3MM(T) SEAL TIN(FOR STEEL TAPE BANDING SIZE 13MM WIDE) APPROX. SIZE 25.41MM LENGTH X 12.7MM WIDTH X 0.3MM THICK AND BAND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3MM.
BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-34183-A Dt.28.07.87(2) BODY WITH DRIVING BEND PROG & TEST PROCEDURE bW 5.500.113 M/C DC(1)34183-A DT.28.07.87 (09 SHEETS)
Specification
BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-34183-A Dt.28.07.87(2) BODY WITH DRIVING BEND PROG & TEST PROCEDURE bW 5.500.113 M/C DC(1)34183-A DT.28.07.87 (09 SHEETS)
NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-34241-A, DT.24.09.87.
Specification
NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-34241-A, DT.24.09.87.
Drawing no.
Manufacturing Technology
CNC MILLING CENTER , CNC TURNING CENTER, DRILLING FACILITY, GRINDING FACILITY,CNC AUTOMATIC MACHINE ( MINIMUM 6 AXIS) HAVING CAPABILITY TO COMPLETE ALL OPERATIONS OF PLUG ( COMPONENT TO A670M FUZE) IN ONE OR TWO SETTINGS
DESIRABLE: VACCUM FURNACE FOR HEAT TREATMENT OF COPPER SPIRAL & OTHER COMPONENT.
DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD TIN FOILTO JSS:9535-06-2010(REV.NO-2), DC NO:4085-ME, DTD.08.09.2010(FOR CAP 78G). NOTE:TOP OF THE TIN FOIL DISC TO BE COATED WITH VARNISH SHELLAC.
Specification
DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD TIN FOILTO JSS:9535-06-2010(REV.NO-2), DC NO:4085-ME, DTD.08.09.2010(FOR CAP 78G). NOTE:TOP OF THE TIN FOIL DISC TO BE COATED WITH VARNISH SHELLAC.
CASE TO DRG.PART NO.QX-172,DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 1988)WITH HARDNESS 55 TO 75 VPN)
Specification
CASE TO DRG.PART NO.QX-172,DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 1988)WITH HARDNESS 55 TO 75 VPN)
CONTAINER TO DRG.NO.4-24929/3 K 33/000,DC NO.36434-A,DT-6.7.98,CONSISTING OF THE FOLLOWING ITEMS. (1)BODY TO DRG.NO.4-24929/3 K33/010 , (2)COVER TO DRG.NO.4-24929/3 K33/020 DC 35604-A, (3)BOLT TO DRG.NO.4-24929/3 K33/030 (4)FORK TO DRG.NO.4-24929/3 K33/005, ALL THE 4NOS DRG'S STATED ABOVE TO DC NO.36434-A,DT.06.07.98
Specification
CONTAINER TO DRG.NO.4-24929/3 K 33/000,DC NO.36434-A,DT-6.7.98,CONSISTING OF THE FOLLOWING ITEMS. (1)BODY TO DRG.NO.4-24929/3 K33/010 , (2)COVER TO DRG.NO.4-24929/3 K33/020 DC 35604-A, (3)BOLT TO DRG.NO.4-24929/3 K33/030 (4)FORK TO DRG.NO.4-24929/3 K33/005, ALL THE 4NOS DRG'S STATED ABOVE TO DC NO.36434-A,DT.06.07.98
PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO DRG.PART NO IQX-51GE,DC-36506-A,DT.23.12.98 WITH BODY AND MAGAZINE SEPARATELY (WITH OUT ASSEMBLED CONDITION)
Specification
PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO DRG.PART NO IQX-51GE,DC-36506-A,DT.23.12.98 WITH BODY AND MAGAZINE SEPARATELY (WITH OUT ASSEMBLED CONDITION)
TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B )
Specification
TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B )
"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND
FITTED WITH BOSS -03 NOS IN EACH PLATE . "
Specification
"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND
FITTED WITH BOSS -03 NOS IN EACH PLATE . "
FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%Max,Over size by mass:10%Max.OTHER REQUIREMENTS:AS PER SPECN
Specification
FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%Max,Over size by mass:10%Max.OTHER REQUIREMENTS:AS PER SPECN
FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE SUPPLYING MATL
Specification
FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE SUPPLYING MATL
FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% MAX. FREE FROM EXTRANEOUS CONTAMINATIONS ETC.
Specification
FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% MAX. FREE FROM EXTRANEOUS CONTAMINATIONS ETC.
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
Specification
RING PRONG SNAP BUTTON-9MM SHALL BE
MADE AS PER MATERIAL GIVEN IN 4741-1968,
ALL FOUR PARTS SHALL BE NIKLE-PLATED AND
CONFORM TO GRADE-B OF IS:1068-1958. SNAP
SHALL DISENGAGE WHENTHEY ARE SUBJECT TO
PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS
CENTRE LINE ASPER ASTM D4846-
96(REAPPROVED 2011).DESIGN/DIMENSIONS
AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS
PER RELEVANT CLAUSE OF SPECIFICATIONA
BOTTOM POURING S.G IRON INGOT MOULD TO SIZE 385 MM DIA X2265 MM LONG AS PER DRG. NO. OH-391. MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865 GRADE:400/18. FIRM SHOULD SUBMIT T.C. FROM, NABL ACCREDITED/GOVT. APPROVED LAB ONLYFOR BASIC METAL & MECHANICAL PROPERTIES.
Specification
MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865 GRADE:400/18
BOTTOM POURING S.G.IRON INGOT MOULD TO SIZE 450 MM DIAX2250MM LG AS PER DRG. NO-O.H.-387. MATL. SPECN-SPHEROIDAL CASTIRON AS PER IS:1865 GRADE 400/18. FIRM SHALL SUBMIT T.C.FROMNABL ACCREDITED/GOVT APPROVED LAB. ONLY FOR BASIC MATERIALAND MECHANICAL PROPERTIES
S.G.IRON INGOT MOULD TO SIZE 20'' X 2500 MM AS PER DRG. NO-OH /1012/153 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT. APPROVED LAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.
"BOTTOM POURING S.G IRON INGOT MOULD TO SIZE 420MM DIA X 218 MM LONG AS PER DRG.NO.LFVD/1000/12/A REV.1. MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865, GRADE:400/18.FIRM SHOULD SUBMIT
T.C FROM NABL ACCREDITED/GOVT.APPROVED LAB ONLY FOR BASIC MATAL & MECHANICAL PROPERTIES. "
Specification
MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865, GRADE:400/18.
