AS PER TECH.PARTICULARS
(a) MASS/SQ MET : 58 GM (MAX)
(b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN)
(c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN)
(d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC.
(e) THICKNESS:0.11MM,MAX AT A PRESSUE OF 200GM/SQCM.
(f) WIDTH : 100 CM
(g) YARN LENIER DENSITY, BOTHWAYS : 45 DENIER(NORMAL)
(h) TWIST OF YARN :WARP:200 TPM, WEFT: 150TPM
(i) THREAD DENSITY, BOTHWAYS :48-50/CM.(j) WEAVE:2/1 TWILL
NOTE: THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/SLIPPAG
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101221262
3944
Metre
39284
110170306
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963
7-PICKS/CM --14 -----IS:1963
8-LINEAR DENSITY OF YARN,TEX WARP ---93.3
WEFT ---23.3 X 2
9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED)
Specification
1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963
7-PICKS/CM --14 -----IS:1963
8-LINEAR DENSITY OF YARN,TEX WARP ---93.3
WEFT ---23.3 X 2
9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101786939
11414
Metre
39291
110170298
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS)
6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5
7.BREAKING STRENGTH kgf,min.N) 2000
8.TPM IN WARP/WEFT 100-200/100-200
Specification
SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS)
6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5
7.BREAKING STRENGTH kgf,min.N) 2000
8.TPM IN WARP/WEFT 100-200/100-200
RELINING OF CERAMIC FOAM FILTER BOX WITH FUSED SILICA BASED CASTABLE REFRACTORY,HYDROPHOBIC MICROPOROUS HIGH DENSITY HIGH TEMPERATURE INSULATION PANELS AND CERAMIC FIBRE BOARD.-OFAJ
Specification
AS PER ANNEXURE-A
Drawing no.
FDY-279A
Manufacturing Technology
Testing / Inspection Facility
--
1
Whole job
39303
MPV07
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).
Specification
JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).
set of strap consist of 33 types with brass tip end & with brass buckle end of different size for ammunition armaments holding system for MPV ARMY as per Annexure I & Annexure II
ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).
Specification
ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
01
23498
Kilogram
39306
OFMK/RM/U000402917/17-18
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
SAND HIGH SILICA AS PER IS: 1987-1974 GRADE-A, GRAIN FINENESS GRADE 425/212, PRODUCED BY CRUSHING QUARTZITE SAND STONES OF OPEN TEXTURE, IN BAG OF 50 KG PACKING.
Specification
SAND HIGH SILICA AS PER IS: 1987-1974 GRADE-A, GRAIN FINENESS GRADE 425/212, PRODUCED BY CRUSHING QUARTZITE SAND STONES OF OPEN TEXTURE, IN BAG OF 50 KG PACKING.
