TAPE WEBBING COTTON PROOFED, SIZE-25 +/-1.6MM WIDE x 1.00+/-0.1MM THICK TO SPECN: JSS:8305-18-2013 REV-3, DC NO.:5134-ME, DT.25.05.2013. NOTE:-BREAKING LOAD 120KG MINIMUM AS PER SPECIAL REQUIREMENT
Specification
TAPE WEBBING COTTON PROOFED, SIZE-25 +/-1.6MM WIDE x 1.00+/-0.1MM THICK TO SPECN: JSS:8305-18-2013 REV-3, DC NO.:5134-ME, DT.25.05.2013. NOTE:-BREAKING LOAD 120KG MINIMUM AS PER SPECIAL REQUIREMENT
CU.STRIP,20+/-0.1(W)X 0.7+0.01(T)MM TO BS:2870,1970,C-102,CONDITION "O". OXIDIZATION,BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=03 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 20 TO 30 KGS IN SINGLE COIL FORM, NABL TEST CERTIFICATE REQUIRED.
Specification
CU.STRIP,20+/-0.1(W)X 0.7+0.01(T)MM TO BS:2870,1970,C-102,CONDITION "O". OXIDIZATION,BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=03 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 20 TO 30 KGS IN SINGLE COIL FORM, NABL TEST CERTIFICATE REQUIRED.
COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "1/2 H".OXIDIZATION,BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=0.5 KG IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 10 TO 15 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.
Specification
COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "1/2 H".OXIDIZATION,BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=0.5 KG IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 10 TO 15 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.
COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "O". OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=02 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 15 TO 20 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.
Specification
COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "O". OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=02 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 15 TO 20 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
07
904
Kilogram
40406
OFBL/ADV/22
Ordnance Factory Bolangir
The Cheif General Manager
Bolangir
Bolangir
Orissa
767770
CLOTH SILK UNDYED UNPROOFED TO SPECN:JSS-8305-22-2013,REV.NO.3,DC NO:5184-ME,DT.19.03.14 SIZE: 990MM TO 1010MM OR 1320MM TO 1370MM WIDTH IS ACCEPTABLE.
Specification
CLOTH SILK UNDYED UNPROOFED TO SPECN:JSS-8305-22-2013,REV.NO.3,DC NO:5184-ME,DT.19.03.14 SIZE: 990MM TO 1010MM OR 1320MM TO 1370MM WIDTH IS ACCEPTABLE.
FABRIC SILK FINE, UNPROOFED & UNDYED [WIDTH:1.09 TO 1.10 MTRS]TO JSS:8305-22/2013-REV-3, DC.5184-ME , DT-19.03.14 (GSM OF THE MATERIAL WILL BE ABOVE 50.88 "O"PER SQ.MTR.)
Specification
FABRIC SILK FINE, UNPROOFED & UNDYED [WIDTH:1.09 TO 1.10 MTRS]TO JSS:8305-22/2013-REV-3, DC.5184-ME , DT-19.03.14 (GSM OF THE MATERIAL WILL BE ABOVE 50.88 "O"PER SQ.MTR.)
DISC CLOTH, SIZE: 31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL (MELTON FINISH)TO SPECN: JSS:8305-16: 2014(REV.3) OR CLOTH COLAR,WHITE TO SPECN:JSS:8305-21:2013 REV.3 REF.DRG.CIA/AMN/2176,PART NO-ISX 77 GF,ITEM NO-11.DC:37013A, DT.06.05.2005.
Specification
DISC CLOTH, SIZE: 31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL (MELTON FINISH)TO SPECN: JSS:8305-16: 2014(REV.3) OR CLOTH COLAR,WHITE TO SPECN:JSS:8305-21:2013 REV.3 REF.DRG.CIA/AMN/2176,PART NO-ISX 77 GF,ITEM NO-11.DC:37013A, DT.06.05.2005.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
62
110000
Number
40407
OFBL/ADV/21
Ordnance Factory Bolangir
The Cheif General Manager
Bolangir
Bolangir
Orissa
767770
DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).
Specification
DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).
LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)
Specification
LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)
FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.
Specification
FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.
INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA DC-37127-A DT.30.07.07(EACH SET CONSIST OF(1) TOP & BOTTOM PIECE TO PART NO ISV-2112 DC-36995 A DT.13.01.05=2 NOS(2) SIDE PIECES(BIG) TO PART NO ISV 2113 DC-36995 A DT.13.01.05=2 NOS(3) FUZE BUFFER TO PART NO.ISV 2114 DC-36995 A DT 13.01.05=1 NO(4) KEY SLOT TO PART NO. ISV 2115 DC-37127-A DT.30.07.07=1 NO(5) MIDDLE PARTITION PIECE TO PART NO ISV 2116 DC-36995 A DT 13.01.05=1NO(6) SIDE PIECE(SMALL) TO PART NO.ISV-2117 DC-36995
Specification
INTERNAL FITMENTS FOR BOX M-41A TO DESIGNER'S REF.CQA(A)/AMN/3306 PART NO ISV 302 SA DC-37127-A DT.30.07.07(EACH SET CONSIST OF(1) TOP & BOTTOM PIECE TO PART NO ISV-2112 DC-36995 A DT.13.01.05=2 NOS(2) SIDE PIECES(BIG) TO PART NO ISV 2113 DC-36995 A DT.13.01.05=2 NOS(3) FUZE BUFFER TO PART NO.ISV 2114 DC-36995 A DT 13.01.05=1 NO(4) KEY SLOT TO PART NO. ISV 2115 DC-37127-A DT.30.07.07=1 NO(5) MIDDLE PARTITION PIECE TO PART NO ISV 2116 DC-36995 A DT 13.01.05=1NO(6) SIDE PIECE(SMALL) TO PART NO.ISV-2117 DC-36995
SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG/ CUBIC METRE TO SPECN.IS:4671-1984(IST REV.TYPE-2) (REF.DRG.NO.ARDE 2174 PARTNO.ISV 514 GA, DC NO.36017 A,DTD. 28.10.95)
Specification
SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG/ CUBIC METRE TO SPECN.IS:4671-1984(IST REV.TYPE-2) (REF.DRG.NO.ARDE 2174 PARTNO.ISV 514 GA, DC NO.36017 A,DTD. 28.10.95)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
65
29021
Number
40410
20170156/pv/1158/eot/f
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD TO JSS-9310-01:2014: REV-3 DC NO.5290 ME DT.16.12.14&PARAFFIN WAX AMMN. TO JSS: 9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.
Specification
MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD TO JSS-9310-01:2014: REV-3 DC NO.5290 ME DT.16.12.14&PARAFFIN WAX AMMN. TO JSS: 9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
61
36192
Number
40412
2016000303
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
PIECE PACKING TOP DRG.NO.ISV 460 GA DC-36647-A , DT-22.02.2000 , ITEM NO.06, SIZE:(460X175X20)MM,MATERIAL:EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG/CUBIC METRE FOR PACKING OF FUZE 117 MK-20.
Specification
PIECE PACKING TOP DRG.NO.ISV 460 GA DC-36647-A , DT-22.02.2000 , ITEM NO.06, SIZE:(460X175X20)MM,MATERIAL:EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG/CUBIC METRE FOR PACKING OF FUZE 117 MK-20.
FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.94 (2) HOUSING HOLDER DETONATOR ASSY TO IQX-60 SA DC NO.35879-A DT.20.12.94 (3) STEMMING HOLDER TO IQX-61 SA DC NO.35879-A DT.20.12.94 (4) MAGAZINE TO IQX-781 DC NO.35916-A DT.21.02.95]
Specification
FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.94 (2) HOUSING HOLDER DETONATOR ASSY TO IQX-60 SA DC NO.35879-A DT.20.12.94 (3) STEMMING HOLDER TO IQX-61 SA DC NO.35879-A DT.20.12.94 (4) MAGAZINE TO IQX-781 DC NO.35916-A DT.21.02.95]
MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343 TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TO DRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817 (t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH
Specification
MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343 TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TO DRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817 (t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH
FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.
Specification
FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.
CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559,DC-35710-A. (4) DISC TO DRG. NO. ISV 2017 DC NO.36449-A,DT.30.7.98.(5)DISC TO DRG NO:ISV-2018 DC 36449-A,DT.30.7.98. (6)SLEEVE-A TO DRG. NO-ISV-2229, DC-37239-A, DT-10.12.09 (7)SLEEVE-B TO DRG. NO-ISV-2230,DC-37239-A, DT-10.12.09
Specification
CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559,DC-35710-A. (4) DISC TO DRG. NO. ISV 2017 DC NO.36449-A,DT.30.7.98.(5)DISC TO DRG NO:ISV-2018 DC 36449-A,DT.30.7.98. (6)SLEEVE-A TO DRG. NO-ISV-2229, DC-37239-A, DT-10.12.09 (7)SLEEVE-B TO DRG. NO-ISV-2230,DC-37239-A, DT-10.12.09
AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
Specification
AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
