BOX FOR 0.32" MODIFIED PISTOL TO DRG. NO CTM-0132

AS PER DRAWING

CTM-0132

SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL PLATING WITH BLACK REFLECTIVE DEPOSITE PH:7 TO 7.5 THICKNESS OF DEPOSITION 80 TO 12 MICRON ON COMPONENT: CTM-0108/2, 0109/2, 0129/2, 0130/2, 0116/2, 0131/2, 0121/2, 0128/2, 0127/2, 0125/2, 0112, 0110/2, 0111/2, AND PB-32

SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL PLATING WITH BLACK REFLECTIVE DEPOSITE PH:7 TO 7.5 THICKNESS OF DEPOSITION 80 TO 12 MICRON ON COMPONENT: CTM-0108/2, 0109/2, 0129/2, 0130/2, 0116/2, 0131/2, 0121/2, 0128/2, 0127/2, 0125/2, 0112, 0110/2, 0111/2, AND PB-32

PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6

AS PER DRAWING

CTM-0111/1 TO CTM-0111/6

HOLSTER MADE OF LEATHER TO ACCOMMODATE MODIFIED O.32" PISTOL

AS PER DRAWING

CTM-0133

METRO ARK SILICON-17

METRO ARK SILICON-17

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

• MSME

• ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

IND/ADE/0068(c)

IND/ADE/0068(c)

SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1 2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25 3.MASS/METERS,(gm) MAX 47 4-ENDS IN FULL WIDTH SUGGESTED 130 5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS) 6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5 7.BREAKING STRENGTH kgf,min.N) 2000 8.TPM IN WARP/WEFT 100-200/100-200

SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1 2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25 3.MASS/METERS,(gm) MAX 47 4-ENDS IN FULL WIDTH SUGGESTED 130 5.PICKS/CM SUGGESTED 12(INCLUDING BOTH LAYERS) 6.DENIER OF WARP/WEFT NOMINAL 840X3 /210X5 7.BREAKING STRENGTH kgf,min.N) 2000 8.TPM IN WARP/WEFT 100-200/100-200

SPECN NO. ADDE/BP/1(b).

SPECN NO. ADDE/BP/1(b).

SPCEN NO.:- JSS:8315-6 ( V.NO.2)

SPCEN NO.:- JSS:8315-6 ( V.NO.2)

SPECN. NO. IND/TC-SERIES.

SPECN. NO. IND/TC-SERIES.

SPCN. NO.ADDE/BP/3(c)

SPCN. NO.ADDE/BP/3(c)

SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II

SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II

SPECN. NO.:ADDE/BP/1(B).

SPECN. NO.:ADDE/BP/1(B).

SPEFICATION:IS:3255-1979

SPEFICATION:IS:3255-1979

SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.

SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.

SPECIFICATION NO. :ADRDE/SPCN/1993/44.

SPECIFICATION NO. :ADRDE/SPCN/1993/44.

SPECIFICATION NO.:ADRDE/SPCN/1993/44.

SPECIFICATION NO.:ADRDE/SPCN/1993/44.

SPECIFICATION NO: ADRDE/SPECN/1993/44 ROLL LENGTH 100 MTR. EXCLUDING SAMPLING.

SPECIFICATION NO: ADRDE/SPECN/1993/44 ROLL LENGTH 100 MTR. EXCLUDING SAMPLING.

SPECIFICATION NO: ADRDE/SPECN/70(b) ROLL LENGTH 100 MTR EXCLUDING SAMPLING.

SPECIFICATION NO: ADRDE/SPECN/70(b) ROLL LENGTH 100 MTR EXCLUDING SAMPLING.

SPECIFICATION NO.: JOHNSON PLAST BRAND Or Equivalent material.

SPECIFICATION NO.: JOHNSON PLAST BRAND Or Equivalent material.

SPECN NO:-ADRDE/SPECN/1983/13(a)

SPECN NO:-ADRDE/SPECN/1983/13(a)

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPCNS.ADRDE/SPECN/2K/54(b) with Appendix 'A" 2 sheet

SPCNS.ADRDE/SPECN/2K/54(b) with Appendix 'A" 2 sheet

SPCNS.ADRDE/SPECN/2K/54(b) with Appendix 'A' 2 sheet

SPCNS.ADRDE/SPECN/2K/54(b) with Appendix 'A' 2 sheet

Drg. No. COT SK-2616

Drg. No. COT SK-2616

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

• MSME

• SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

AS PER TECHNICAL PARTICULARS

AS PER TECHNICAL PARTICULARS

AS PER TECHNICAL PARTICULARS

AS PER TECHNICAL PARTICULARS

BREECH BLOCK SLIDE LOCK FOR 12 BORE PUMP ACTION GUN, DRG. NO. PAG-0027

STEEL BS:970 GD 659 H-15 OR BS:970 PT. I 1985-GD709 M40 TREATMENT:-HRD & TEMPD TO 300-400 VPN

DRG. NO. PAG-0027

BLADE FORE SIGHT FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-074*

STEEL B.S. 970 PT-3, 1991, Gd. 709M, 40T (En. 19T)

DRG. NO. SPR-074*

PIN LEAF REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. :-

IS:5517-93, 55 C8 OR BS:970, En 9

DRG. NO. :-

BOTTOM PLATE FOR 0.315" SPORTING RIFLE, DRG. NO. SP-25-ESPTL

BS:1449 PT. 1 . Gr. 3. CR. SEC 2 OR IS:513 (DEEP DRAWN BRIGHT)

DRG. NO. SP-25-ESPTL

HEAD BREECH BOLT FOR 0.315" SPORTING RIFLE, DRG. NO. SP-18

BS:970 PT. 1 . 1983. GR. 655 M-13 OR IS:4432. 1988 DESIGNATION 13 NI-13 Cr 3 .G.

DRG. NO. SP-18

CYLINDER HEAD RH UTD(FULLY FINISHED)

CYLINDER HEAD RH UTD(FULLY FINISHED)

SB 20-06-02-5

CYLINDER HEAD RH UTD(FULLY FINISHED)

CYLINDER HEAD RH UTD(FULLY FINISHED)

SB 20-06-01-5

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

• MSME

• BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

• MSME

• WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

Rotating Search Light as per Enclosure

Specification enclosed

CYLINDER LINER(FULLY FINISHED)

CYLINDER LINER(FULLY FINISHED)

303-07-26

CAMSHAFT BUSH

CAMSHAFT BUSH

307-08-3

DRIVE GEAR

DRIVE GEAR

402-98

PIN OF ARTICULATED CON ROD

PIN OF ARTICULATED CON ROD

SB 304-04-1

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

• MSME

• METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

• MSME

• METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

METALISED POLYSTER FILM HAVING THICKNESS 12.5 MICRONS LAMINATED WITH POLYTHENE OF 150 GAUGE.

METALISED POLYSTER FILM HAVING THICKNESS 12.5 MICRONS LAMINATED WITH POLYTHENE OF 150 GAUGE.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

JSS: 9160-05 2016, Revision No.-3.

JSS: 9160-05 2016, Revision No.-3.

• MSME

• JSS: 9160-05 2016, Revision No.-3.

LEAD TUBE FOR FLSC-4

LEAD TUBE FOR FLSC-4 NOMINAL INT TOLERANCE -5%, GE TO L2102 SPECIFICATION IS:404-1993 PART-1, GRADE-1. LEAD PURITY- 99.9%, DIMENSION : ID:4.7, -0.2 MM LENGTH OF COIL 4 METER.

LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.

LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.

• MSME

• LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.

LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.

LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.

• MSME

• LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.

LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.

LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.

• MSME

• LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

• MSME

• LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

• MSME

• LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

• MSME

• LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

WATER PUMP DRIVE GEAR

WATER PUMP DRIVE GEAR

402-37-7

BOOSTER PUMP GEAR

BOOSTER PUMP GEAR

402-43-3

CYLINDER LINER V46 (FULLY FINISHED)

CYLINDER LINER V46 (FULLY FINISHED)

303-07-22-1

LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06

LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06

LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

• MSME

• LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

• MSME

• INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

BF 1.33,dated-09.05.2003 METOD OF TESTING AS PER JSS 6810-39/1993 WITH 39/1993 WITHLATEST AMENDMENTS

BF 1.33,dated-09.05.2003 METOD OF TESTING AS PER JSS 6810-39/1993 WITH 39/1993 WITHLATEST AMENDMENTS

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

DRG. NO. IND/ME/29, DC NO. 3604-ME DTD. 13.12.99

• MSME

• CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

• MSME

• H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

• MSME

• GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

• MSME

• GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

• MSME

• GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

• MSME

• FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

• MSME

• DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

FERRIC ACETYL-ACETONATE ( F.A.A. ) SPECN :- ERDL/ TRIM/ PROP/RM/9

FERRIC ACETYL-ACETONATE ( F.A.A. ) SPECN :- ERDL/ TRIM/ PROP/RM/9

EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

• MSME

• EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002.

ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002.

• MSME

• ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 1976 DC NO 3754-ME DT.12.12.2002.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

• MSME

• MSME

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

• MSME

• ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

• MSME

• WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

DILUTE NITRIC ACID (STRENTH WITHIN THE RANGE BY MASS (50-65) %) STRICTLY CONFORMING TO SPECIFICATION IND/ME/129, DC-3754- ME DTD.12.12.2002

DILUTE NITRIC ACID (STRENTH WITHIN THE RANGE BY MASS (50-65) %) STRICTLY CONFORMING TO SPECIFICATION IND/ME/129, DC-3754- ME DTD.12.12.2002

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made

DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made

• MSME

• DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made