BEARING INVESTMENT CAST MT. 4076968

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BEARING INVESTMENT CAST MT. 4076967

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF PLATE 5191786

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF BRACKET 5176854

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

BRACKET INVESTMENT CASING 5176856

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LEVER 5176302

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LEVER 5176858

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF HOUSING 5169029

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF FORK-END. 5169027

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

INVESTMENT CASTING OF LIST.5189617

AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL

• a

• b

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

• (I) Rubber moulding facility (II) Dimension measuring facility

• (III) Relevant inspection & testing facility

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

• as per file attached

• as per file attached

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

• as per file attached

• as per file attached

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

• upload

• upload

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

• attached

• attached

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

• attached

• attached

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87

BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87

BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87

• as per file attached

• as per file attached

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

• as per file attached

• as per file attached

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

• as per file attached

• as per file attached

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

• uploaded soon

• uploaded soon

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

• (i) Rubber Mixing Mill or Kneading M/C (ii) Extruder m/c (iii) Pulverizing m/c (iv) Roto Moulding Process / plastic injection moulding m/c (v) Grinder (vi) Drill Machine

• (vii) Other relevant Inspection & Testing facility

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

• (I) FORGING FACILITY (II) CNC/ LATHE MACHINE (III) HEAT TREATMENT FACILITY

• (IV) RELEVANT INSPECTION & TESTING FACILITY

CASING FOR HEAD 1G46 TO DRG NO. AL8635059

AS PER DRAWING

AL8635059

FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS

SPECN:ADRDE/specn./2002/56(b) variety NO.2

FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.

ADRDE/SPECN/2002/56 (b)(VTY.NO.2)

Tape Nylon 25 MM BS 450 KG U/D

ADRDE/SPECN/1992/38(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C

IND/ENG/PROV/1170/c, Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

IND/ENG/PROV/1170/b Drawing No. ISK:0791/C

Drawing No. ISK:0791/C

TAPE NYLON 26 MM 2150 kgf

Specn. No.- ADRDE/SPECN/70(b), variety No. 1 Page No. 15 of 25 as per No. ADRDE/QMS/TDTM/SPECN/85.

• As per Specn/Drg

• As per Specn/Drg

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING

FABRIC NYLON 52 GMS UNDYED 91.4 CMS.

SPECIFICATON NO.:-ADRDE/SPECN/1988/32

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

WIDTH-15(+1/-0)MM,THICKNESS-0.50MM(MAX),WEIGHT/MTR-4.6gm(max. BREAKING STRENGTH :185 KG(MIN) HEAT SETTING :PROPER HEAT SETTING REQUIRED TOTAL NO.OF ENDS :120 NO. PICKS/CM :12 NO. DENIER OF YARN :(a)ENDS:245,(b)PICKS:210 TPM(RANG) :WARP:80-95,(b)WEFT:85-90 EXTENSION AT BREAK :20-30% WEAVE :OXFORD(2 ENDS WERKING AS ONE)

FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3

Specification: IS:4726-1984.

BUCKLE ADRDE/1429-01

BUCKLE A.B.C DRG.NO. ADRDE/1429-01

BUCKLE A.B.C DRG.NO. ADRDE/1429-01

• As Per Specification/Drawing

• As Per Specification/Drawing

THREAD SEWING NYLON LIGHT OG VARIETY NO. L- 2. 3 STAND OG (BL-35N(MIN)) SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

SPECIFICATION NO IS-4229-1992 (VARIETY NO L-2).

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-1.50 SQMM (19/0.32) FOR ELECTRICAL MAINS EQUIPMENT WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/05/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-0.75 SQMM (7/0.37) FOR ELECTRICAL MAINS EQUIPMENT WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/05/MOD-1

AS PER SPECIFICATION

WIRE MGTF 0.2 AS PER TU16-505.185-71

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHV-0.35 SQMM (19/0.16) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHVE-0.20 SQMM (7/0.20) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1

AS PER SPECIFICATION

SHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHVE-0.14 SQMM (18/0.10) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1.

AS PER SPECIFICATION

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FIBROUS LAPPED & PVC INSULATED WIRE) MGSHV-1.0 SQMM (32/0.20) FOR INSTRUMENTS WITH MINIMUM ELONGATION OF 15% (TESTED AT USER END) AS PER SEPC. NO. OLF/MSD/WIRE/01/MOD-1 (COLOUR-BROWN)

SHIELDED MULTISTRAINED FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE ) MGSHVE-0.35 SQMM (19/0.16) RUSSIAN SPCN TY-16-505-437-82

SHIELDED MULTISTRAINED FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE ) MGSHVE-0.35 SQMM (19/0.16) RUSSIAN SPCN TY-16-505-437-82

WIRE-MGTF-0.12, TY16.505.185.71

WIRE-MGTF-0.12, TY16.505.185.71

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.020), RUSSIAN SPCN. TY 16-505-437-82)

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.020), RUSSIAN SPCN. TY 16-505-437-82)

WIRE MM-0.1 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-0.1 AS PER SPECN. NO. TY16.K71-087-90

BRAID PML 4X5 AS PER SPECN. NO. TY22-3708-76

BRAID PML 4X5 AS PER SPECN. NO. TY22-3708-76

SLEEVE 305 TV-40,6 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40,6 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 4 AS PER SPEC. NO. GOST-19034-82

SLEEVE 305 TV-40, 4 AS PER SPEC. NO. GOST-19034-82

SLEEVE 305 TV-40, 2.5 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2.5 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2 AS PER SPECN. NO. GOST-19034-82

SLEEVE 305 TV-40, 2 AS PER SPECN. NO. GOST-19034-82

WIRE MM-1.00 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-1.00 AS PER SPECN. NO. TY16.K71-087-90

WIRE MM-0.12 AS PER SPECN. NO. TU16-K71-087-90

WIRE MM-0.12 AS PER SPECN. NO. TU16-K71-087-90

WIRE MGSHV 0.5 ZH AS PER SPECN. NO. TU16.505.437-82

WIRE MGSHV 0.5 ZH AS PER SPECN. NO. TU16.505.437-82

WIRE MGTF 0.35 AS PER SPECN. NO. TU16-505-185-71

WIRE MGTF 0.35 AS PER SPECN. NO. TU16-505-185-71

WIRE MPO 0.2 AS PER DRG. NO. TU16-505-339-79

WIRE MPO 0.2 AS PER DRG. NO. TU16-505-339-79

WIRE MGTFE 0.12 TO SPEC NO. TU16-505.185-71

WIRE MGTFE 0.12 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.2 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.2 TO SPEC NO. TU16-505.185-71

WIRE MGTF 0.07 AS PER SPECIN NO. TU16-505.185-71

WIRE MGTF 0.07 AS PER SPECIN NO. TU16-505.185-71

TU16-505.185-71

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984 2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984 3- Ends(in full/width)------ 85+4/-0. IS:1963 4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963 5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969 6- Nature of material--100% Polyster. IS:667 7- pH Value(Cold Method)--6 to 8.5. IS:1390 8- % Water soluble matter(max)-- 1%. IS:3456 9- Weave-- 2/2 Twill weave. Visual

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

TAIL UNIT ASSY OF 100-120 KG AREAL BOMB, DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

TAIL UNIT ASSY OF 100-120 KG AREAL BOMB, DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

DRG NO- RFI SK 9980. CONSISTS OF 01 NO. OF CONE (RFI SK 9976), 04 NOS OF STABILISER FIN (RFI SK 9995), 01 NO OF STABILISER RING ASSY (RFI SK 9975) & 01 NO OF BASE BUSH (RFI SK 9996).

ARM SEAR CONNECTING (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

ARM SEAR CONNECTING (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

DRG. REF. NO. 1005-003196 AND DRG. NO. RFI. SK. 10118.

PLUNGER,LEVER,TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127 FOR 9MM AUTO PISTOL

PLUNGER,LEVER,TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127 FOR 9MM AUTO PISTOL

DRG. REF. NO.1005-003181 AND DRG. NO. RFI. SK. 10127

LINK,HAMMER (THROUGH MIM ROUTE) DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117 FOR 9MM AUTO PISTOL

LINK,HAMMER (THROUGH MIM ROUTE) DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117 FOR 9MM AUTO PISTOL

DRG. REF. NO. 3040-003489AND DRG. NO. RFI. SK. 10117

TRIGGER (THROUGH MIM ROUTE) DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129.FOR 9MM AUTO PISTOL

TRIGGER (THROUGH MIM ROUTE) DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129.FOR 9MM AUTO PISTOL

DRG. REF. NO.1005-003184AND DRG. NO. RFI. SK. 10129

PLATE LOCKING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

PLATE LOCKING (THROUGH MIM ROUTE) DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

DRG. REF. NO.1005-003205AND DRG. NO. RFI. SK. 10126

EJECTOR (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121 FOR 9MM AUTO PISTOL

EJECTOR (THROUGH MIM ROUTE) DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121 FOR 9MM AUTO PISTOL

DRG. REF. NO. 1005-003156 ANDDRG. NO. RFI. SK. 10121