SHAFT 675-58-313/A FOR RACE RING ASSY. MPV.TURRET

SHAFT

675-58-313/A

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9

COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9

HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT

HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT

FLOOR PLATE (TROOPER COMPT) DRG. NO. 640-07-1020-1/C

FLOOR PLATE (TROOPER COMPT) DRG. NO. 640-07-1020-1/C

640-07-1020-1/C

GLASS FRAME (REAR GLASS) PART NO. 640-10-1025-1 DRG. NO. 640-10-1025-1

GLASS FRAME (REAR GLASS) PART NO. 640-10-1025-1 DRG. NO. 640-10-1025-1

640-10-1025-1

LADDER ASSY. DRG. NO. 640-01-2750-1/C

LADDER ASSY. DRG. NO. 640-01-2750-1/C

640-01-2750-1/C

BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F

BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F

620-01-3110-1/F

WELDING ELECTRODES SIZE: 5 MM DEPOSITING 19 CR, 9 NI & 6MN & .40 MO STAINLESS STEEL WELD METAL, SPECIFICATION NO. CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

WELDING ELECTRODES SIZE: 4 MM DEPOSITING 18 CR, 8 NI & 6MN STAINLESS STEEL WELD METAL, SPECN. CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

WELDING ELECTRODES SIZE: 3.15 MM DEPOSITING 19 CR, 9 NI & 6MN STAINLESS STEEL WELD METAL, SPECN CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE

CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE

DRINKING WATER TANK DRG. NO. 640-01-1450-1/C

DRINKING WATER TANK DRG. NO. 640-01-1450-1/C

640-01-1450-1/C

SEAT BASE ASSY (REAR RHS) DRG. NO. 645-08-1060-1

SEAT BASE ASSY (REAR RHS) DRG. NO. 645-08-1060-1

645-08-1060-1

FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D

FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D

640-01-2550-1/D

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

As per Requirements & Specifications

As per Requirements & Specifications

BEARING 5-1000095K TO SPCN TY 4479-73 FOR HEAD OF T-90

TY 4479-73

BEARING 5-1006 TO SPCN. TU 4479-73 FOR HEAD OF T-90

TU 4479-73

BALL BEARING BALL 2.5-100 TO GOST NO. 3722-81 FOR HEAD T-90

GOST 3722-81

BALL BEARING BALL 3.175-40 TO GOST NO. 3722-81 FOR HEAD OF T-90

GOST 3722-81

BEARING 0-1000094 TO GOST NO. 8338-75 FOR HEAD OF T-90

GOST 8338-75

BEARING 0-1000906, GOST 8338-75 SINGLE ROW BALL BEARING SIZE- 30x47x9MM, OPEN TYPE, CLASS OF ACCURACY - 0,

AS PER GOST 8338-75

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.

Cloth Cotton Closely Woven 170 Grams Scoured 91.4 Cms, (Variety No. A)

Specn. No. : JSS-8305-05:2020 (Fourth Revision) (a) Sampling Plan & Criteria for conformity as per CQAT&C/QA1/TC-11/12.

• As per Specification/Drawing

• As per Specification/Drawing

SPRING HANGER BRACKET (REAR SUSPENSION) DRG. NO. 620-02-1210-1/D

SPRING HANGER BRACKET (REAR SUSPENSION) DRG. NO. 620-02-1210-1/D

620-02-1210-1/D

BOTTOM BRACKET (LEAD SPRING MOUNTING) DRG. NO.620-02-120-1/C

BOTTOM BRACKET (LEAD SPRING MOUNTING) DRG. NO.620-02-120-1/C

620-02-120-1/C

JSS:4020-9-1999 (Rev No:1)

JSS:4020-9-1999 (Rev No:1)

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F and SPECIFICATION NO. OFPM/R&D/SP/COMPOSITE - ARMOUR/07 DT. 16.03.2007 Amendment No.: 04 Dt. 02.03.2019

645-15-1-1 TO 15/F

• AS PER SPECIFICATION

• AS PER SPECIFICATION & QAP

BEARING SLEEVE SPECIAL BOTTOM DRG.NO.:CQA(I)-796/5

BEARING SLEEVE SPECIAL BOTTOM DRG.NO.:CQA(I)-796/5

CQA(I)-796/5

housing ep to drg. cwc/229/32/2

housing ep to drg. cwc/229/32/2

cwc/229/32/2

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

• as per file attached

• as per file attached

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

• as per file attached

• as per file attached

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

• as per file attached

• as per file attached

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

• as per file attached

• as per file attached

1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WIPER MOTOR) DRG NO. 640-01-1830-1/A

1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WIPER MOTOR) DRG NO. 640-01-1830-1/A

1) DRG NO. 645-01-3322/A; 2) DRG. NO. 645-01-3324; 3) DRG NO. 645-01-3323/A; 4) DRG NO. 645-01-3325/A; 5) DRG NO. 640-01-1830-1/A

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

• as per file attached

• as per file attached

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

IS: 3751 - 1966 PACKING & MARKING AS PER SCHEDULE NO. CQA (T&C)/PMS/33

IS: 3751 - 1966 PACKING & MARKING AS PER SCHEDULE NO. CQA (T&C)/PMS/33

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

Specn. no. IS-6488-1975 With Amndt. No. 1 of Jan. 1980

Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on Whole Job Basis

Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on Whole Job Basis

Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43

Manufacturing & Supply of Barrel Assy. to Drg. No. DW-1108-1600 -13 Material AISI 316

Manufacturing & Supply of Barrel Assy. to Drg. No. DW-1108-1600 -13 Material AISI 316

DW-1108-1600 -13

POWER OPERATED REAR VIEW MIRROR SET CONSISTING OF ONE LHS MIRROR AND ONE RHS MIRROR ALONGWITH ITS ACCESSORIES USED ON HEAVY DUTY FOUR WHEELERS AS PER SPECIFICATION NO. OFPM/R&D/SP/ARMY/REAR VIEW MIRROR

POWER OPERATED REAR VIEW MIRROR SET CONSISTING OF ONE LHS MIRROR AND ONE RHS MIRROR ALONGWITH ITS ACCESSORIES USED ON HEAVY DUTY FOUR WHEELERS AS PER SPECIFICATION NO. OFPM/R&D/SP/ARMY/REAR VIEW MIRROR

POLY PROPYLENE CORRUGATED PACKING BOX TO DRG. NO- CO-453 C

AS PER DRG.

CO 453-C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

DS CAT NO.1005-000755 DC (I) NO.24576-SA

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing/specification.
• 2. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

AS PER DRG.

AS PER DRG.

DS CAT No. Y3/6230-000012

• Optical

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

STEEL RD 45MM DIA IN HR & NORMALISED CONDN.TO SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT )

SPECN.BS:970PT -3:1991.GD.070M55.

AS PER DRG.

AS PER DRG.

DS CAT 1005-000441

St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.

St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.

AS PER DRG. SKM-306*4

IS :179- (LATEST)

IS :179- (LATEST)

DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT (AS PER SCOPE OF WORK)

DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT (AS PER SCOPE OF WORK)

AS PER SPECIFICATION

AS PER SPECIFICATION

FLOOR PLATE (DRIVER COMPARTMENT) DRG/PT. NO. 640-07-1051-1 TO 640-07-1060-1/D

FLOOR PLATE (DRIVER COMPARTMENT) DRG/PT. NO. 640-07-1051-1 TO 640-07-1060-1/D

640-07-1051-1 TO 640-07-1060-1/D

MUD GUARD ASSY. DRG. NO. 640-01-4030-1/A

MUD GUARD ASSY. DRG. NO. 640-01-4030-1/A

640-01-4030-1/A

MODIFICATION TO STALLION DRAG LINK DRG NO. 640-04-1106-1/A

MODIFICATION TO STALLION DRAG LINK DRG NO. 640-04-1106-1/A

640-04-1106-1/A

LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R

LOW DENSITY POLYTHENE [L.D.P.E.] NATURAL AS PER JSS 6145-26:2014&MSCQ-1R

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

FORGING FOR LEVER/ HANDLE

FORGING FOR LEVER

765-58-221

SILENCER/ MUFFLER FOR MPV PART NO. X3967400

SILENCER/ MUFFLER FOR MPV PART NO. X3967400

115-01-0006-1(A)

BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. TSP-302

BS:970 PT.1 GR 070 M55 OR En-9

DRG. NO. TSP-302

SEAT BASE ASSEMBLY (DRIVER & CO-DRIVER) FOR MPV DRG. NO. 110-31-0011-1

SEAT BASE ASSEMBLY (DRIVER & CO-DRIVER) FOR MPV DRG. NO. 110-31-0011-1

110-31-0011-1

GLASS FRAME (SIDE GLASS) DRG. NO. 640-10-1024-1 PART NO. 640-10-1024-1

GLASS FRAME (SIDE GLASS) DRG. NO. 640-10-1024-1 PART NO. 640-10-1024-1

640-10-1024-1

BRACKET REAR SIGHT FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-024*2

STEEL BS 970 En19A

DRG. NO. SPR-024*2

SEAT BASE ASSY (FRONT RHS) DRG. NO. 640-08-1080-1/C

SEAT BASE ASSY (FRONT RHS) DRG. NO. 640-08-1080-1/C

640-08-1080-1/C

SEAT BASE ASSY (REAR LHS) DRG. NO. 645-08-1050-1

SEAT BASE ASSY (REAR LHS) DRG. NO. 645-08-1050-1

645-08-1050-1

SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C

SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C

640-08-1070-1/C

TAPE NYLON 66,43 MM.B.S. 9000 N U/D

ADRDE/SPECN/1985/27(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

GUARD ASSY (FRONT LIGHT MTG) DRG. NO. 610-06-2012-1/B

GUARD ASSY (FRONT LIGHT MTG) DRG. NO. 610-06-2012-1/B

610-06-2012-1/B

TAPE NYLON 66, 26mm TUBULAR BS 1850 KG ADRDE/SPECN/2000/54(c)

ADRDE/SPECN/2000/54(c)

GLASS FRAME (CO-DRIVER SIDE GLASS) PART NO. 640-10-1023-1 DRG. NO. 640-10-1023-1

GLASS FRAME (CO-DRIVER SIDE GLASS) PART NO. 640-10-1023-1 DRG. NO. 640-10-1023-1

640-10-1023-1

SPRING MAIN FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003186

BS: 970 Pt.3 : 1991 Gr. 817 IN 'C D; LTA, CONDOTION TEST OIECE TO BE TESTED IN CONDITION 'W' OF BS:970 PART 3:1991

DRG. NO. DS CAT NO-1005-003186

STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003177

MOULDING POWDER, MOULDING PLASTICS (PHENOLIC) TO SPECN. NO. JSS 1097 GRD. 'Z' WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa, OR NYLON 66 GP COLOUR BLACK TO SPECN DEF/STAN 93-8/1 WITHOUT GLASS FIBRE FINISH OF END PRODUCT OF STOCK SIDE RIGHT SHALL BE COLOUR BLACK (MATT. FINISH)

DRG. NO. DS CAT NO-1005-003177

STOCK SIDE LEFT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003176

MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC) TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fibre. finish of end product of stock side left shall be colour black (matt. finish)

DRG. NO. DS CAT NO-1005-003176

MAGAZINE ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

AS PER DRAWING

DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

GUIDE SPRING MAIN ASSY FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-5360-007390

CROMIUM ALLOY STEEL BALL TO SPECN. IS:2898-1976 H.T./HARDNESS

DRG. NO. DS CAT NO-5360-007390

SLING SUB ASSY. FOR 12 BORE PUMP ACTION GUN, DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995

AS PER DRAWING

DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995