Hot Rolled Good quality structural and sized steel of Grade 50 to specification TY 14 1 2884 80 Size Steel rod 32 plus 0 point 0r minus 0 point 16 Dia In Straight Length of 2 3 meters

Hot Rolled Good quality structural and sized steel of Grade 50 to specification TY 14 1 2884 80 Size Steel rod 32 plus 0 point 0r minus 0 point 16 Dia In Straight Length of 2 3 meters

CROSS CONNECTOR STRAP SAFETY PIN

DRG.NO.ADRDE/1390

DRG.NO.ADRDE/1390

• As Per Specification

• As Per Specification

LAP STRAP ADJUSTABLE BUCKLE (For Pilot Para Mirage/Sea Harrier & Jaguar A/C)

DRG. NOo. ADRDE/1456(a) Except that :- Material for Spring : Steel Wire for Mechanic Grade-SL as per IS:4454 (Part-1) : 2001, sheet No.12 of 17.

• As per Specification/Drawing

• As per Specification/Drawing

SPECN-NO:- DRG.NO.ADRDE/1352.

SPECN-NO:- DRG.NO.ADRDE/1352.

DRG.NO.ADRDE/1352.

FASTNER LIFT THE DOT CLOTH TO CLOTH

SPECN. NO. ADRDE/171(b) Except that:- (i) Fastener Lift the Dot Cloth with both types of Rivet Clinch i.e. Prong Type and Rivet Type may be used in fabrication of harness of PP BMK-41. (ii) Any grade i.e. (Cu Zn 30/ Cu Zn 37/ Cu Zn 40) of IS:410-1967annealed condition as specified in drawing No. ADRDE/171 be used. However, grade of material for Socket Top, Socket Bottom, Plate Socket Back and Rivet Clinch (Prong and Rivet type) shall be same.

• As per Drawing/Specification

• As per Drawing/Specification

THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue

Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD

• As per Specification

• As per Specification

CASTING FOR BLANK UPPER RACE RING DRG. NO. 645-01-7311-2/B FOR MINE PROTECTED VEHICLE

CASTING FOR BLANK UPPER RACE RING

645-01-7311-2/B

CASTING FOR LOWER RACE RING DRG. NO. 645-01-7313-1/C/B FOR MINE PROTECTED VEHICLE

CASTING FOR LOWER RACE RING

645-01-7313-1/C/B

ALUMINIUM COPPER MASTER ALLOY II OF COMPOSITION CU-18 TO 22%, SI-0.50 % MAX, FE-0.60% MAX.

SPECN. IS:2047 - 1992 REAFFIRMED 2017.

• *File Uploaded.

• *File Uploaded.

MOTOR DPM 25-N1-01 SPEC NO OST 160.515.022-76 (LF 9001120758)

MOTOR DPM 25-N1-01 SPEC NO OST 160.515.022-76 (LF 9001120758)

CHIP-140UD1A Drg No.SPECNNO:BKO347004TY1 CHIP-140UD1A, AS PER SPECN. NO: BKO.347.004 TY1

CHIP-140UD1A Drg No.SPECNNO:BKO347004TY1 CHIP-140UD1A, AS PER SPECN. NO: BKO.347.004 TY1

SOCKET RPS -1-15G TO DRG.NO.OUO 364044TU, FOR BLOCK-D

SOCKET RPS -1-15G TO DRG.NO.OUO 364044TU, FOR BLOCK-D

SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19

SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19

PHMK-III-1-19

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Drg no-PHMK-IV-3-1-3

Investment Casting To Drg. No.SK-3665* Required For Revolver Shield, D.A. No. 35/04 DT. 09-04-04

Investment Casting To Drg. No.SK-3665* Required For Revolver Shield, D.A. No. 35/04 DT. 09-04-04

DRG. NO.SK-3665* D.A. No. 35/04 DT. 09-04-04

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

DRG NO SK-5377R*1

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

DRG NO SK-5376R*1

BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08

BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08

DRG NO SK-5375R*3

Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09

Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09

D.A. No. 24/09, Dt. 16.07.09

Steel Flat Size:- 6 X 22mm in Hot Rolled & Normalised Condn.To Specification Bs:970:Pt.1:1983:Gd.070m55. Material To Be Tested in Hardened & Tempered Condition as Per Ruling Section & Seperate Test Piece Need to be heat treated to achieve Hardness 200-250 HV.NMIR & Macrotech Test As Per Nature`C]

Steel Flat Size:- 6 X 22mm in Hot Rolled & Normalised Condn.To Specification Bs:970:Pt.1:1983:Gd.070m55. Material To Be Tested in Hardened & Tempered Condition as Per Ruling Section & Seperate Test Piece Need to be heat treated to achieve Hardness 200-250 HV.NMIR & Macrotech Test As Per Nature`C]

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

AUTOMATIC CONTROL UNIT 9S517-1S

SPEC. NO. 9S517-1S.00.000 IND TY

DRG. NO. 9S517-1S.00.000 IND

SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19

SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19

PHMK-III-1-19

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Drg no-PHMK-IV-3-1-3

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

DRG. NO. SK- 5573R

CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

AS PER ATTACHED SAMPLE

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

DRG. NO. SK-5574R

User's Manual For Revolver .32 (7.65mm) Specification Details should be as per Annexure "A".

User's Manual For Revolver .32 (7.65mm) Specification Details should be as per Annexure "A".

Specification Details should be as per Annexure "A".

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

DRG.NO.SK-4745*2,

• as per attachment

• as per attachment

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

LEVER STUD CHANGE LEFT DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC (MIM ROUTE)

LEVER STUD CHANGE LEFT DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC (MIM ROUTE)

DRG NO. 0204 03 02 02 20 002 00DD

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)

NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 011 00DA

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB

0204-03-02-00-06-005-00DB

TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR

AS PER REQUIREMENT AND SPECIFICATION

WASHER COPPER HOSE TINNED 5 5 MM ID X 14 MM OD X 1 25 MM THICK

AS PER REQUIREMENT AND SPECIFICATION

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

DRG No.0204-03-04-02-14-021-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN SPECN NO. TU 2421-117-00151727-98 GRADE-MAKE:HAYMEN/ RANKEM/MERCK/ THERMO FISHER SIZE: 1 LITRE/ 1.5 LITRE/ 2 LITRE.

SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN SPECN NO. TU 2421-117-00151727-98 GRADE-MAKE:HAYMEN/ RANKEM/MERCK/ THERMO FISHER SIZE: 1 LITRE/ 1.5 LITRE/ 2 LITRE.

BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE

BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE

• as per file attached

• as per file attached

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

RIVET STEEL FLAT HEAD 3.15MM DIA X 8MM LONG

IS:2998-LATEST

HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE

IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PLATE ENGAGING COMPLATE WITH LINK AS PER DRG NO OFB/C/718,566

SPECN NO. IA 1169(n)

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:5041-2001 & APPENDIX "G" OF IND/TC/3844

IS:1397-1990, REAF. 2002

IS:1397-1990, REAF. 2002

HDPE BAG WHITE OF SIZE 750 X 500 X1000MM

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

TIMBER CHIR,KHASIPINE OR KAIL PLANK GR-1SIZE 55 MM X 110 MM X 3.00 MTR.

AS PER REQUIREMENT AND SPECIFICATION

TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM

AS PER REQUIREMENT AND SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA

DRG.NO.0204 03 02 00 01 010 00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE,DRG.No.0204-03-02-00-00-004-00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE,DRG.No.0204-03-02-00-00-004-00DA

0204-03-02-00-00-004-00DA

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION

FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION

DRG.NO. NAD 7606/4

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Blade Foresight Drg no-PHMK-IV-3-1-3 in finished condition required for Revolver MK-IV

Drg no-PHMK-IV-3-1-3

PACKING ENCLOSURE FOR COMPONENTS OF AN-32 PLATFORM AS PER DRAWING NO. SK-1252 A.

PACKING ENCLOSURE FOR COMPONENTS OF AN-32 PLATFORM AS PER DRAWING NO. SK-1252 A.

IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/-

IND/TC/0155 VARIETY NO.2 EXCEPT THAT ROLL LENGTH 100 MTR +/-

IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO

IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO

FABRIC NYLON BLACK 250 GMS P U COATED 172 CMS WIDE.

Specification No. IND/TC/0155 Except Threads/Cm (As per

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983

AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

YARN WOOL POLYAMIDE (80:20) 240 TEX RED COLOUR, OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX RED/2012 AND ANNEXURE-I ATTACHED. AS PER RELEVANT CLAUSE OF THE SPECIFICATION, AS PER RELEVANT CLAUSE OF THE SPECIFICATION

YARN WOOL POLYAMIDE (80:20) 240 TEX RED COLOUR, OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX RED/2012 AND ANNEXURE-I ATTACHED. AS PER RELEVANT CLAUSE OF THE SPECIFICATION, AS PER RELEVANT CLAUSE OF THE SPECIFICATION

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)

NO. TS /10233/10234/TROUSER AND JACKET COMBAT 02062018 OCFAV/FABRIC/005 (CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CM MIN (EXCLUDING SELVEDGE)

As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)

As per IS:1954, Prov. Specn. No. ADRDE/SPECN.1983/14(except Air Porosity Test)

IND/TC/1208

IND/TC/1208