GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION

GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION

SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION

AS PER DRAWING

NAI(J)/501/6/4

COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP

COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP

MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION

MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION

STEEL BALL 3 5 MM DIA TO DRG NO NAI J 501 5 IN FC

STEEL BALL 3 5 MM DIA TO DRG NO NAI J 501 5 IN FC

TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION

AS PER DRAWING

NAI(J) 501/2

CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle

AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle

TEND 2369

INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

TEND DRG. No.2310

GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

RFI.SK-4312*12

MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.

AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.

RFI/SK/7470

BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

TEND 1818*(MODIFIED)

STEEL ROD 7MM DIA +/- 0.05 MM TO SPECN IS-1673 GR-I

STEEL ROD 7MM DIA +/- 0.05 MM TO SPECN IS-1673 GR-I

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING DC NO.37326-A

CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING DC NO.37326-A

BALL, BEARING DS CAT NO.311-0003635(QX 1538) DC NO.37162-A DT.11.03.08 IN F/C (INCLUDING PLATING OPERATION)

BALL, BEARING DS CAT NO.311-0003635(QX 1538) DC NO.37162-A DT.11.03.08 IN F/C (INCLUDING PLATING OPERATION)

AL.ROD 7 MM DIA.+/0.2 MM SPECN BS-1474: HE-15 ‘TB’ OR BS-1475-1969:HG-15’TB’ CONDITION OR IS :733-1983 GRADE 24345 IN ‘W’ CONDITION

AL.ROD 7 MM DIA.+/0.2 MM SPECN BS-1474: HE-15 ‘TB’ OR BS-1475-1969:HG-15’TB’ CONDITION OR IS :733-1983 GRADE 24345 IN ‘W’ CONDITION

SPRING STEEL WIRE 0.4318 MM DIA TO SPECN.BS 5216:1991 GRADE HS-3

SPRING STEEL WIRE 0.4318 MM DIA TO SPECN.BS 5216:1991 GRADE HS-3

BRASS ROD 6 MM+-0.02MM DIA. TO SPECN.BS-2874-86 DESIGNATION CZ-121, PB3 IN ‘M’ CONDITION (IN STRAIGHT LENGTH 1.8 MTRS TO 2.42 MTRS.)

BRASS ROD 6 MM+-0.02MM DIA. TO SPECN.BS-2874-86 DESIGNATION CZ-121, PB3 IN ‘M’ CONDITION (IN STRAIGHT LENGTH 1.8 MTRS TO 2.42 MTRS.)

SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS

SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CARD BOARD PACKING CASE AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

TEND 1834*

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 10 RIFLES)TO DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

RFI.SK.6430*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

29P 0048*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

29P 0006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle

.29P 0051*

AMN.PROTECTIVE COMPOSITION NO.213 TO SPECN JSS-8010-41. DC NO.3029-ME

AMN.PROTECTIVE COMPOSITION NO.213 TO SPECN JSS-8010-41. DC NO.3029-ME

PAINT AZURE BLUE TO ISC 104 TO SPECN IS :168(LATEST ISSUE)

PAINT AZURE BLUE TO ISC 104 TO SPECN IS :168(LATEST ISSUE)

COMPOSITION SEALING AMMUNITION NO 7 SPEN JSS-8030-19

COMPOSITION SEALING AMMUNITION NO 7 SPEN JSS-8030-19

ASSY. OF PIN SAFETY CLIP AND WASHER TO DRG. NO. IQX-4A

ASSY. OF PIN SAFETY CLIP AND WASHER TO DRG. NO. IQX-4A

IQA-4A

SPRING IN F/C TO DRG. NO. QX-344

SPRING IN F/C TO DRG. NO. QX-344

PIN HINGE TO DRG NO QX-1248 IN F/C

PIN HINGE TO DRG NO QX-1248 IN F/C

SPRING IN FC GSF SK. NO. M 6743 PT QX-341

AS PER DRG.

WASHER TO DRG NO IQX-123 IN FINISH CONDITION

WASHER TO DRG NO IQX-123 IN FINISH CONDITION

IQX-123

SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

29P 0065*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING MAIN TO DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

29P 0015

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING LEAF BED BACK SIGHT TO DRG. NO.29P 0008 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle

29P 0008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

29P 0040*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLADE FORE SIGHT 29P 0004* required for 0.315" Sporting Rifle

AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle

29P 0004*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BAND BACK SIGHT TO DRG.NO.29P 0009 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle

29P 0009

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING SCREW BAND INNER TO DRG NO.29P 0061* required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle

29P 0061*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SEAR TO DRG. NO 29P 0058 required for 0.315" Sporting Rifle

AS PER DRG. NO 29P 0058 required for 0.315" Sporting Rifle

29P 0058

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C

CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C

QX-439

DIE CASTING FOR SAFETY CAP TO DRG. NO. C-2325

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Part No QX 336 for Fuze 162 Mk-8/Mk-9

AS PER DRAWING

QX-336

Magazine to Part No IQX 12 for Fuze 162 Mk-8/Mk-9

AS PER DRAWING

SAFETY CAP IN F/C PT IQX-14

SAFETY CAP IN F/C PT IQX-14

STOP PIN TO DRG NO M-10112 A IN FINISHED CONDITION

AS PER DRAWING

SEPTUM IN FINISHED COND. TO PT. NO. QX-338.

SEPTUM IN FINISHED COND. TO PT. NO. QX-338.

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

DIE CASTING FOR SAFETY CAP TO DRG. NO. C-2325

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

29P 0041*

• AS PER DRAAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER FRONT TO DRG. NO.29P 0056 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0056 required for 0.315" Sporting Rifle

29P 0056

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW STRIKER TO DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

29P 0017

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SWIVEL SLING FRONT 29P 0070* required for 0.315" Sporting Rifle

AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle

.29P 0070*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER BACK TO DRG. NO.29P 0055 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle

.29P 0055

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

29 P 0002*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010

AS PER REQUIRED SPECIFICATION

PLASTIC CONTAINER FOR PACKING TRANSPORT EMPTY FUZE 162 MK-8 TO DRG. NO.-M-10700

PLASTIC CONTAINER FOR PACKING TRANSPORT EMPTY FUZE 162 MK-8 TO DRG. NO.-M-10700

POLY PROPYLENE CORRUGATED PACKING BOX TO DRG. NO- CO-453 C

AS PER DRG.

CO 453-C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BRUSH SHUTTER TO EXTRUSION DRG. NO-F 676/1 FOR Fz 162 MK-8 & MK-9

BRUSH SHUTTER TO EXTRUSION DRG. NO-F 676/1 FOR Fz 162 MK-8 & MK-9

BRASS ROD 28.5 MM DIA BS 2874-CZ-121, PB-3"M" CONDITION(LATEST ISSUE) STRAIGHT LENGTH 1.828 TO 2.433 MTR

BRASS ROD 28.5 MM DIA BS 2874-CZ-121, PB-3"M" CONDITION(LATEST ISSUE) STRAIGHT LENGTH 1.828 TO 2.433 MTR

WASHER SPRING BAND INNER TO DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

29P 0067*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COLLER TO DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

29P 0035

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLATE BUTT TO DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

29P 0049

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

29P 0047*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT STOCK WITH WASHERS AS ONE SET CONSISTING:- BOLT STOCK TO DRG.NO.29P 0043*(SP-43 )=10 NOS WASHER BOLT STOCK TO DRG.NO.29P 0066(SP-66)=11 NOS WASHER SPRING BOLT STOCK TO DRG.NO.29P 0069(SP-69)=11 NOS required for 0.315" Sporting Rifle

AS PER DRG

29P 0043*, 29P 0066, 29P 0069

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EXTRACTOR 29P 0021* required for 0.315" Sporting Rifle

AS PER Drg. No. 29P 0021* required for 0.315" Sporting Rifle

29P 0021*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

29P 0007, 29P 0010, 29P 0011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

TEND 2045

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle

AS PER DRG

29P 0028, 29P 0411*, 29P 0460, 29P 0440

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING EXTRACTOR TO DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

29P 0019*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

29P 0020*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

29P 0046*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW CAP SLING FRONT TO DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

AS PER DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

29P 0053*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW CAP SLING REAR TO DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

29P 0054*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

29P 0042*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EJECTOR TO DRG. NO.29P 0052 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0052 required for 0.315" Sporting Rifle

29P 0052

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE