SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

29P 0060*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

29 P 0038*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BOLT LOCKING TO DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

29P 0068*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

29P 0033STR3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BOLT LOCKING TO DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

29P 0057*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING BOLT LOCKING TO DRG.NO.29P 0062* required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0062* required for 0.315" Sporting Rifle

29P 0062*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PROTECTOR TO DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

29P 0050*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

29P 0016*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PAD SLING TO DRG.NO.29P 0037 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0037 required for 0.315" Sporting Rifle

29P 0037

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

29P 0045*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AS PER SPECIFICATION

DRG. NO.ADRDE/1402-08

DRG. NO.ADRDE/1402-08

SPECN:- ADRDE/1319(a)

SPECN:- ADRDE/1319(a)

YELLOW/WHITE LINE RIP PIN. (SHEET 1 OF 8)

DRG. NO.: ADRDE/1322(b) DRD/66/98.

• As per Specification/Drawing

• As per Specification/Drawing

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG.NO.:ADRDE/1297 ( b )

DRG.NO.:ADRDE/1297 ( b )

SOCKET FOR HARNESS

DRG.NO.ADRDE/1387 (a)

D- RING OF ROD THICKNESS 8 MM

Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring

ADRDE/292(d)

ADRDE/292(d)

ADRDE/292(d)

NYLON SEWING THREAD V. NO. H-2 SPECN. NO. IS:4229-1992.

SPECN. NO. IS:4229-1992.

SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242)

as per SEAMLESS TUBE 16MMx10.287MM IS:5517-1993, DESGN. 42 Cr4 Mo2 LRS 63mm(ICR1242)

ICR 1242

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INPUT MATERIAL: BODY FORGING CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL

AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL

ICR-1325

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CONE BASE AND CONE TOP FOR PP BMK41

Drawing No. ADRDE/1367(b) and ADRDE/1320(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

INPUT MATERIAL: BODY FORGING CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL

AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL

ICR-1325

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CONTAINER CLEANING KIT RIFLE EMPTY 1A DS CAT NO. 1005-004134, DC NO. 21447-SA DT.05-11-91 (SHT.NO.1&2), DC.NO.21414 DT.26.9..91 (SHT.NO.3)FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.

AS PER DS CAT NO. 1005-004134, DC NO. 21447-SA DT.05-11-91 (SHT.NO.1&2), DC.NO.21414 DT.26.9..91 (SHT.NO.3)FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.

DS CAT NO. 1005-004134, DC NO. 21447-SA DT.05-11-91 (SHT.NO.1&2), DC.NO.21414 DT.26.9..91 (SHT.NO.3)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH MAGAZINE INVESTMENT CASTING (DS CAT NO 1005-001539) TO DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)

AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)

ICR-1199

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING SAFETY SEAR TO DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)

AS PER DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)

ICR-1282

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CARRIER BREECH BLOCK TO DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)

AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)

ICR -1268

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR TO DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)

AS PER DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)

ICR-1231

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PIN HINGE MOULDING TO D.S.CAT. NO. 5315 - 018168, D.C. NO.: 24629 - SA DATED: 02.02.2000 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL. ICR-1194

AS PER D.S.CAT. NO. 5315 - 018168, D.C. NO.: 24629 - SA DATED: 02.02.2000 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL. ICR-1194

ICR - 1194

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF STAY HAMMER TO DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)

AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)

ICR 1333

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF EXTRACTOR TO D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)

AS PER D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)

ICR -1262

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)

AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)

ICR -1332

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BUSH CYLINDER GAS TO D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)

AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)

D.S. CAT. NO. 3120-004656 (ICR-1241)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TOOL REMOVING RUPTURED CASE, 7.62 MM 1A. GEN. ARRANGEMENT TO D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)

AS PER D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)

D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLAMP (OP: ASSEMBLE EXTRACTOR) TO DRG. NO. F-3871 (BREECH BLOCK ASSEMBLY) (CES ITEMS)

AS PER DRG. NO. F-3871

DRG. NO. F-3871

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TOOL COMBINATION 2A TO D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95 FOR DC. No. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95 FOR DC. No. LATEST ISSUE TO BE FOLLOWED.

D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

HANDLE CARRYING ASSEMBLY (PLASTIC) (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),

AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),

(ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

(ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )

AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )

DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010

FILLER MAGAZINE, 1A TO D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83. (FOR RIFLE 7.62mm 1A1) (FULLY FINISHED WITH FIRM'S MATERIAL

AS PER D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83. (FOR RIFLE 7.62mm 1A1) (FULLY FINISHED WITH FIRM'S MATERIAL

D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83.

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PULLTHROUGH WEIGHT FOR 7.62MM RIFLE

AS PER DRG

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BRUSH CLEANING RIFLE MARK 1/L, DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

REGULATOR GAS TO (ICR 1247) DRG.NO. TEND 1877*4

AS PER (ICR 1247) DRG.NO. TEND 1877*4

(ICR 1247) DRG.NO. TEND 1877*4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING PLATFORM TO DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)

AS PER DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)

DS. CAT. NO. 5360-007080 DA.No.003/16 DATED 23.02.2016 (ICR-1508)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).

AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).

DRG. NO. TEND 1805*2 (ICR-1290).

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY to D.S. CAT No.1005-004025, D.C No.26416-SA. dt.09.05.2008 with details of latest issue D.S. CAT No.5305-005010, 5340-016097, 1005-001664, 1005-004026, 1005-004028, 1005-005449, 5305-005009, 1005-004027, TEND 1911 REF. NEW DC

As per Drawing

D.S. CAT No.1005-004025

• As per OFT requirements

• As per OFT requirements

ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.D.C.No.26761-SA.DATED:10.06.15.(FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1271)

as per ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.D.C.No.26761-SA.DATED:10.06.15.(FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1271)

icr -1271

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302

AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302

TEND 1888*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLOCK BREECH (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)

AS PER (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)

(ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).

AS PER DRG. NO. TEND 1692* (ICR 1576)

DRG. NO. TEND 1692* (ICR 1576)

WASHER TUBE RECOIL TO D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)

AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)

D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RING RETAINING GAS REGULATOR TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED

AS PER DRG TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED

D.S. CAT NO.5365-010326

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BRUSH CLEANING 7.62mm CHAMBER / GAS CYLINDER 1A. D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

NUT LOCK FORESIGHT TO D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.

AS PER D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.

D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000 (ICR-1493)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

RIVET AXIS LOCKING PLATE D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)

AS PER D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)

D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1

AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1

DRG. NO.TEND 1905 (ICR-66 SA)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL

AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL

D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03.

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF PIN AXIS TRIGGER AND SEAR TO D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)

AS PER D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)

D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (ICR - 1220)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF SLEEVE PISTOL GRIP TO D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

AS PER D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG. & SUPPLY OF PLUNGER LEVER CHANGE TO DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315

AS PER DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315

DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 (ICR - 1315)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER POSITIONING FLASH ELIMINATOR TO TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).

AS PER TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).

TEND:1939* (ICR 1250, 1577, 1578, 1579 & 1580).

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUNGER RETURN SPRING TO D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001

AS PER D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001

D.S. CAT NO.1005-001672 (ICR 1228)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW RETAINING LOCKING CATCH LEVER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98

AS PER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98

DS.CAT.NO.5305-005005 (ICR 1222)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN,EJECTOR LOWER TO DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)

AS PER DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)

DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 (ICR-1327)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN EJECTOR UPPER TO DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)

AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)

DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 (ICR-1326)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUNGER TO D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)

AS PER D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)

D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 (ICR-1295)

PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)

AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)

D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 (ICR-1269)

SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)

AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)

DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 (1CR-1230)

SUPPLY OF PLUNGER EXTRACTOR TO DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED

AS PER DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED

DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING GAS CYLINDER TO D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)

AS PER D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)

D.S CAT NO.5315-001760 (ICR 1245)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN COCKING HANDLE TO D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

D.S. CAT NO.5315-009175 (ICR 1288)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW ZEROING BACK SIGHT TO D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)

AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)

D.S. CAT NO.5305-018164 (ICR 1229)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FERRULE BUTT TO D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)

AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)

D.S. CAT NO.1005-001613 (ICR 1207)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW FRONT SLING LOOP TO D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)

AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)

D.S. CAT NO.5305-004999 (ICR 1206)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DETENT ZEROING SCREW D.S. CAT. NO. 1005-001599 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16 TO BE FOLLOWED

AS PER D.S. CAT. NO. 1005-001599 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16 TO BE FOLLOWED

D.S. CAT. NO. 1005-001599 (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STUD LEVER LOCK TO D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)

AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)

D.S. CAT NO.1005-001659 (ICR 1321)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

KNOB LEVER LOCK TO D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)

AS PER D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)

D.S. CAT NO.1005-001656 (ICR 1318)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN RETAINING LOCKING CATCH TO D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)

AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)

D.S. CAT. NO.5315-001773 (ICR 1221)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE