STEEL CUP WITH SEAL FOR FSAPDS TO DRG. PT. NO. IRW 29 SA DES. REF. ARDE 2120, DET. NO. 10 & SPECN. NO. CQA(A)570 & (ARDE DRG.NO. 1006 08 19 00 00 000 12TA FOR REFERENCE)

CQA(A)5709

DRG. PT. NO. IRW 29 SA

PERFORATED ADDITIVE LINER WITH DISC TO HEMRL DRG. NO. 1194 SHT.NO.1 &2 (IRW 232 & IRW 235) & SPECN.NO. CQA(A) 0317(A) (ARDE DRG.NO. 1006 03 09 00 00 000 00TA & 1006 04 14 00 00 000 00TA FOR REFERENCE)

CQA(A) 0317(A) (ARDE DRG.NO. 1006 03 09 00 00 000 00TA & 1006 04 14 00 00 000 00TA FOR REFERENCE

DRG. NO. 1194

CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.

CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.

CUP DETONATOR HOLDER TO DRG. NO. ITX 36 & BASE DETONATOR HOLDER TO DRG. NO. ITX 37

PLUG (PLASTIC)

PLUG (PLASTIC)

DRG. PART NO. ISX-393

CUP FOR PRIMER GUV-7

DRG.NO.3-027321,

DRG.NO.3-027321, DETAIL NO.7

DUMMY DETONATING DEVICE TO DRG. NO. 3-26155

DUMMY DETONATING DEVICE TO DRG. NO. 3-26155

DRG. NO. 3-26155

BASE DRG.NO.4-025998,081, DC-36956A, MATERIAL:PHENOLIC PLASTIC CN 1-342-02,SPECN.JSS 9330-05:2002 WITH REQT. OF TENSILE STRENGTH NOT LESS THAN-350 KG/SQ.CM OR PHENOLIC PLASTIC TO GRADE SP-27 OF M/S IPL BOMBAY IS PERMITTED.

SPECN. NO. JSS 9330-05

DRG.NO.4-025998,081,

LENS TO DRAWING NUMBER 4-025998, DETAIL NUMBER 065, DC 36956-A DT.16-4-04. MATERIAL: PHENOLIC PLASTIC CN1-342-02 GOST.5689-79 OR INDIAN EQUIVALENT APPROVED BY CQA(ME), M/S IPL, BOMBAY GR. SP-27 OR MOULDING POWDER/MOULDING PLASTIC (PHENOLIC) TO SPECN. JSS 9330-05.

SPECN. NO. JSS 9330-05

DRAWING NUMBER 4-025998, DETAIL NUMBER 065,

INSERT DETAIL NO.067 FOR 125 MM HEAT

MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".

DRAWING NUMBER 4-025998 DETAIL NO. 067

PRIMER PERCN.QF CARTG.19B/L EMPTY TO DRG.PT.NO.IQX-71 GE DC- 35638-A,FOR FULL CHARGE 130 MM & SPECN.NO.CIA 3102 (E) DC.NO.35638-A,DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO.CQA(A)/PS/PR/26/1 & NO. CQA(A) /PS/PR/27/5.

SPECN.NO.CIA 3102

DRG.PT.NO. IQX-71 GE

PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY.

PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY.

DRG.PART NO.IQX-51 GE.

PRIMER ELECTRIC 1A/L EMPTY

PRIMER ELECTRIC 1A/L EMPTY

CQA(A) PART NO. IQX 46 GE

FUZE,SAFETY NO.20 MK 1/L, SPECN : CQA(A) 0509(D) DC-36854-A

CQA(A) 0509(D)

SAFETY FUZE NO.11 MK2/LA SPECN:CQA(A) 0507(F) DC-36854-A. DULY PACKED IN AMMUNITION 96A (DRG.NO.ISV 274 GA) AS PER CLAUSE 8.1 A OF SPECIFICATION.

SPECN NO. CQA(A) 0507

DRG.NO. ISV 274 GA

SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN SCREW M5 X10L QTY: 3 NOS.

SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN SCREW M5 X10L QTY: 3 NOS.

DRG.NO.HEMRL/SK/1173 DET.NO.14 DRG.NO. HEMRL/SK/1173 DET.NO. 15 DRG.NO. HEMRL/SK/1173 DET.NO. 18

SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/1173 DET. NO.9 QTY:1 NO,(E)BELT ASSY DRG.HEMRL/SK/1173 DET.10 QTY:1 NO

SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/1173 DET. NO.9 QTY:1 NO,(E)BELT ASSY DRG.HEMRL/SK/1173 DET.10 QTY:1 NO

DRG.NO.HEMRL/SK/1173 DET.NO.6

• attached

• attached

LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5

LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5

DRG.NO. HEMRL/MISC/SK/NO/1438 DET.NO. 5

M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B

M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B

DRG.NO.FT/XIV/007B

SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 10L QTY:3 NOS

SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 10L QTY:3 NOS

SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL/SK/ 1169 DET.NO.10 QTY:1 NO.

SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL/SK/ 1169 DET.NO.10 QTY:1 NO.

DRG.NO.HEMRL /SK /1169 DET. NO.2

LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5

LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5

DRG.NO. HEMRL/MISC/SK/NO/1437 DET.NO.5

STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN 125A OR EQUIVALENT.

IS 2016

STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN125A OR EQUIVALENT

STAINLESS STEEL MACHINED WASHER DIA 4.5MM IS 2016 OR DIN125A OR EQUIVALENT

STAINLESS STEEL HEX NUT M4 TO IS-1367 GRADE A2-70 OR A4-70 OR EQUIVALENT.

IS-1367

STAINLESS STEEL HEX.BOLT M4 X 20 LONG TO IS-1367 GRADE A2-70 OR A4-70 OR EQUIVALENT.

IS-1367 GRADE A2-70

MS TARGET PLATE FOR PROOFING SIZE 400 MM X 300 MM X 25 (T) MM QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.

QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008.

CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008

CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008

DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO.HEMRL/HE/ADD/ 08 /01 REV. 00 OF 09/2008.

MS TARGET BLOCK FOR PROOFING OF SHAPE CHARGE 90 MM & 145 MM TO DRAWING NO. FT/XIV/019

IS:2062 (GRADE E 250A

LINER FOR SHAPED CHARGE 145 MM TO DRG. NO. HE/CAST/022 DET 3 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

JSS 9310-01:2007

SADDLE ASSLY FOR SHAPED CHARGE 145 MM TO DRG.NO.HE/CAST/025 DET.1 CONSISTING OF 3 COMPONENTS TO DRG. NO. HE/CAST/025 DET 2 TO 3 & ALLEN SCREW M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008..

QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008.

DRG.NO.HE/CAST/025DRG. NO. HE/CAST/025

SHAPED CHARGE 145 MM (EMPTY) CONSISTING OF 2 COMPONENTS DET 2 AND 4 (EXCLUDING BOOSTER PELLET & DETONATOR HOLDER) & QAP NO. HEMRL/HE /ADD/08/01 REV.00 OF 09/2008.

QAP NO. HEMRL/HE/ ADD/08/01 REV.00 OF 09/2008.

DRG. NO. HE/CAST 022

M.S. TARGET PLATE AS PER IS-SPECIFICATION IS: 2062, SIZE: L 500 MM X W 500 MM X H 100 MM

IS:2062

PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.

PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.

DRG. PART NO. ISX 266

REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.

REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.

DRG. NO. 3-016919,

DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429

DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429

DRG. NO. 3-016919,53-B-025Y, DET.NO.40

SEALING RING MATERIAL: HOSE TRANSPARENT PVC MATERIAL USED FOR THE ITEM SHOULD CONFORM TO ALL TEST REQUIREMENTS AGAINST PARA 7.3.1 OF THE SPECIFICATION EXCEPT TESTS AT SL.NOS.1,2,7,11 AND 13

SPECN.JSS 4720-02

DRG.NO.3-016919/ 53-B-025Y DET.NO.52

UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007

UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007

DESIGNER'S REFERENCE 155-1000(M)

UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007

UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007

DESIGNER'S REFERENCE 155-2000 (M)

GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)

GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)

DES. REF.NO. 04-13-2452-148

OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).

OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).

CQA DESIGN. REF.155-1140, DC 37025-A DT.08/08/05

ADDITIVE LINER FOR FULL CHARGE 130 MM DRG.PT.NO.IRW-162 DC-35659-A, SPECN.NO.CQA(A) 0303(D) DCI 33783-A

SPECN. NO. CQA (A) 0303

DRG.PT.NO.IRW-162

ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.

ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.

DRG.NO.2-013535/53-OQ-482M, DET.NO.9, DC 36685-A FOR SHELL 130 MM.

SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001

SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001

DRAWING PART NO. ISX 46 GE (2-SHEETS)

• DRAWING PART NO. ISX 46 GE (2-SHEETS)

• DRAWING PART NO. ISX 46 GE (2-SHEETS)

METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.

METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.

DRG. NO. NAD-8501 (PROV) DATED 07-04-1986

SPRING PROPELLANT TO DRG.NO. ARDE-1135,DET.NO.4, AL.NO.525 DT. 16-02-1985 FOR ROCKET 68 MM HE/HC/PRACTICE

SPRING PROPELLANT TO DRG.NO. ARDE-1135,DET.NO.4, AL.NO.525 DT. 16-02-1985 FOR ROCKET 68 MM HE/HC/PRACTICE

DRG.NO. ARDE-1135, DET. NO. 4, AL. NO.525 DT. 16-02-1985

PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA

PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA

ARDE DRAWING NO 8603 02 04 00 000 00 DA

BALL, (MATERIAL-STEEL), DIA. 5.56 MM WITH PHOSPHATING.

SPECN. JSS 0465-01,CLASS 3

DRG.PT.NO. ITX 244

WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.

WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.

DRG. PART NO. ITX-240

CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM

CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM

DRG. PART NO. IQX 165 GF

WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL

WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL

DRG. PART NO. ITX 245

CHAMBER (ZINC BASE ALLOY) to design.ref. CIA/AMN/474 Part No. QX- 40 DC- 35853-A DT.22-11-94.

CHAMBER (ZINC BASE ALLOY) to design.ref. CIA/AMN/474 Part No. QX- 40 DC- 35853-A DT.22-11-94.

design.ref. CIA/AMN/474 Part No. QX- 40

HOUSING WITH PIN

HOUSING WITH PIN

DRG. PT. NO. IQX 85 SA DT.08-09-2000

TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011

TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011

DRG.PT.NO. IQX-943

BODY MINE, LID MINE, ADAPTER

SPECN. IA 1285(B

BODY MINE TO DRG. PT. NO. ITX-238, LID MINE TO DRG. PT.NO. ITX-247, ADAPTER TO DRG. PT. NO. ITX-246

CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5

CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5

CAP TO DRG.NO. 3-024045, 3B15, PART N0. 2-4 & SMALL CUP TO DRG. NO. 3-024045, 3B15, PART NO.2-5

COVER TO PT.NO. 2-11 FOR 125MM HEAT

COVER TO PT.NO. 2-11 FOR 125MM HEAT

DRG. NO. 3-024045, 3B15 PT.NO. 2-11

CUP TO PART NO. 2-10 FOR 125MM HEAT

CUP TO PART NO. 2-10 FOR 125MM HEAT

DRG. NO. 3-024045, 3B15, PT.NO. 2-10

SLEEVE, MAT.:CELLULOID TO DRAWING PART NO.IQX-849,DC 36681-A DTD.29-05-2000 FOR PRIMER 19B

SLEEVE, MAT.:CELLULOID TO DRAWING PART NO.IQX-849,DC 36681-A DTD.29-05-2000 FOR PRIMER 19B

DRAWING PART NO. IQX-849

SLEEVE MAGAZINE FOR PRIMER 18A.

SLEEVE MAGAZINE FOR PRIMER 18A.

DRAWING PART NUMBER IQX-831

BOMB 120MM HE 1A EMPTY BODY (2 PC.SCREWED) TO DRG.PT NO.ITV- 30A DC-35737A & CQA(A) SPECN.NO.2341 DC-3571CONST.OF:1)FRONT PART 1A, DRG.NO.ITV-178 (2)REAR PART-ITV-88 (3)PLUG FZ.HO LE TRANSIT 40.64MM 1A -ITV-179 (4) BASE PLUG TRANSIT-ITV-93 (5)WASHER - CIA/AMN/2451 WITH NOSE ADAPTER-ITV-19 DC 36749A.

SPECN. NO. 2341

DRG. PT NO. ITV- 30A

MORTAR, BOMB 120 MM, EMPTY BODY FITTED WITH PLUG TRANSIT TO DESIGNER'S REF: CIA/AMN/662, PART NO ITV-18, DC NO. 35737-A DT. 25-6-94 DULY PHOSPHATED & VARNISHED AND SPECIFICATION NO. CQA(A) 2341 DC NO. 35715-A

SPECN. NO. CQA(A) 2341

PART NO ITV-18

TAIL UNIT 1A TO DRAWING PART NUMBER ITV 8A, DC 36818-A DATED 09-3-2002 AND SPECIFICATION NUMBER CQA(A) 2308(D) DC 36818-ADATED 09-3-2002.

SPECN NO. CQA(A) 2308(D)

DRAWING PART NO. ITV 8A

LABEL STICKER COLOUR: OLIVE GREEN OR BLACK

LABEL STICKER COLOUR: OLIVE GREEN OR BLACK

DRG. NO. SK- 1457 DT. 01-09-84

LABEL I.A. 983 (EXPLOSIVE) MATL.: PRESSURE SENSITIVE ADHESIVE TAPES WITH PLASTIC BASE

SPECN. NO. IS: 13262-1992 (R.A.1997)

DRG. NO.I.A.- 983

LABEL STICKER FOR FUZE B429 WITH ADAPTER 130 MM.

SPECN NO. CQA(A) 2201, (LATEST ISSUE)

DESIGNER'S REF. CQA(A)/ LABEL /1058.

LABEL (STICKER) FOR FUZE 117 MK-20

LABEL (STICKER) FOR FUZE 117 MK-20

DES. REF. NO. CQA(A)/LABEL/1056

BAG POLYTHENE AS PER DRG. PART NO. ISV 1627 DC NO. 36832-A, MATERIAL: LOW DENSITY POLYETHYLENE TYPE I TO SPECN. JSS 9330-03 : 2007 (REV. NO. 2) DC NO. 3909-ME , SIZE - 1170 MM X 303 MM X 0.5 MM THICK .

SPECN. NO. JSS 9330- 03

DRG. PART NO. ISV 1627

PLYWOOD FOR GENERAL PURPOSE TYPE BB BWR GRADE TO SPEN.IS-303 - 1989 ( WITH AMENDMENT NO.2), SIZE - 1.20 M X 1.20 M X 6 MM - 5 PLY.

IS-303 - 1989

PLYWOOD FOR GENERAL PURPOSE TYPE AB GRADE MR TO SPECN.IS:303 -1989 (III REVISION) SIZE- 1200 MM X 1200 MM X 4 MM-3 PLY.

IS:303 -1989

PLYWOOD TYPE BB MR GRADE TO SPECN.IS:303-1989(THIRD REVISION AMENDMENT 2 ), SIZE: 2.40 M X 1.20 M X 3 MM -3 PLY.

IS:303-1989

PLYWOOD BWR / AB SIZE: 2.40 M X 1.20 M X 6 MM THICK -5 PLY

SPECN. IS: 303 -1989 (THIRD REVISION) (AMENDMENT NO. 2)

TIMBER NON-CONIFEROUS, SIZE 51 MM X 51 MM X 1.50M T0 1.53M

SPECN. NO. IND/ME/883 (F) (PROV)

TIMBER NON-CONIFEROUS, SIZE 240 MM X 22 MM X 1.75M TO 1.78M AS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO. 3754-ME DT. 12-12-2002.

IND/ME/883(F) (PROV)

TIMBER NON-CONIFEROUS,SIZE 210 MM X 25 MM X 1.250M TO 1.300M AS PER SPECN. NO.IND/ME/883(F)(PROV) DC NO.3754-ME DT. 12-12-2002.

IND/ME/883(F) (PROV)

TIMBER NON-CONIFEROUS, SIZE 110 MM X 16 MM X 1.30M TO 1.33M AS PER SPECN.NO. IND/ME/883(F)(PROV), DC.NO.3754-ME DT.12-12-2002.

IND/ME/883(F) (PROV)

SHEET SANDWICHED TYPE CAMBRIC-POLYTHENE-CAMBRIC SIZE-170 MM WIDE X 0.229 TO 0.279 MM THICKNESS IN 1.0 MTR LONG.

IND/ME/740 (D)

POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I, SIZE 200 MM X 0.076 MM THICK.

JSS 9330-03:2007 REVISION NO 2

POLYETHYLENE FILM, LOW DENSITY, BLACK, SPECN.NO.JSS 9330-03-2007,DC 3909-ME,REV.NO.2, SIZE 0.2MM TO 0.3MM THICK X WIDTH 1 MTR IN RUNNING LENGTH

SPECN.NO. JSS 9330-03

POLYTHENE LAY FLAT TUBING WIDTH 60 MM + 5 MM - 0.00 MM WIDE 0.2 TO 0.3 MM THICK LOW DENSITY POLYETHYLENE, TYPE I, TO SPECN NO. JSS 9330-03:2007 (REV.NO. 2) DC 3909-ME, DT.21-07-2008.

JSS 9330-03:2007

EXPANDED POLYSTYRENE FOAM (THERMOCOLE) AVERAGE DENSITY 18 TO 25 KG/M3.

IS: 4671 - 1984 (FIRST REVISION) R.A-1999 SIZE: 1000 MM X 500 MM X 10 MM THICK.