BARIUM NITRATE GRADE 1 (100 % PASSING THROUGH 125 MICRON IS SIEVE) TO SPECIFICATION NO. JSS 6810-59:2010 (REVISION NO.3) DC-4087-ME DT.24/09/2010

SPECN NO. JSS 6810-59

AMMONIUM SULPHATE (SPL. GRADE) TO SPECIFICATION NO.JSS 6810-64:2006,DC-4026-ME DT.08.01.2010, REV. NO. 2.

SPECN NO. JSS 6810-64

ALUMINIUM POWDER, LIGHT,GRADE-1, SIZE- 125 MICROMETRE IS SIEVE TO SPECIFICATION NO. JSS 1370-04:2002,DC NO.3799-ME DT.03-02-2004

SPECN NO. JSS 1370-04

ALUMINIUM POWDER,HEAVY GR-1, SIZE 106 MICRON

JSS-1370-03:2007

ALUMINIUM POWDER HEAVY GRADE-1 TO SPECN.NO. JSS 1370-03:2007 REVISION NO. 3 FOR DENTEX COMPOSITION VIDE SPECN. NO. ERDL/HEI/PS/137 REVISION 01. NOTE: FOR SIEVE SIZE OF AL. POWDER HEAVY GR.1 REFER SPECN.NO ERDL/HEI/PS/137, REV.01 UNDER PARA.3.1

JSS1370-03:2007 REVISION NO. 3 FOR DENTEX COMPOSITION VIDE SPECN. NO. ERDL/HEI/ PS/ 137 REVISION 01. NOTE: FOR SIEVE SIZE OF AL. POWDER HEAVY GR.1 REFER SPECN.NO ERDL/ HEI/PS/137,REV.01 UNDER PARA.3.1

BORIC ACID CRYSTALS

SPECIFICATION NO. IS: 263-1990 FIFTH REVISION, REAFFIRMED-2000.

ACETONE TO SPECIFICATION NO.IS:170-1986(THIRD REVISION) REAFFIRMED-2001.

SPECN NO.IS:170-1986

SOLD SOLDER WIRE (WITHOUT ROSIN AT CORE)18 SWG (1.22 MM DIA) TIN:LEAD 60% 40 % MAX. SPECN BS 441.

BS 441.

SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE).APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.

SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.

FOIL TIN/LEAD, SIZE: 63 PLUS MINUS 1 MM WIDE X 0.05 MM THICK TO SPECN. JSS 9535-06: 2010 (REV. NO. 2) DC 4085-ME,IN ROLL FORM AND COIL LENGTH 3 TO 5 KG/REEL

SPECN. NO. JSS 9535-06

LEAD SEAL, SIZE 10 MM DIA.

SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997

SHEET LEAD,SIZE 2440 MM LONG X 1220 MMWIDE X 2MM PLUS MINUS 0.1MM THICK TO PURE LEAD, MINIMUM PURITY 99.99%.

SPECN.IS-405 (PART-1):1992 (THIRD REV.)

STEEL STRIP, SIZE 190 + -0.2 MM WIDE X 0.5 + -0.04 MM THICK,COLD ROLLED & ANNEALED BEST SURFACE TYPE "D" HARDNESS 90 TO 105 HV.NOTE:(I) WEIGHT OF EACH ROLL MUST BE 200 KG MAXIMUM (II) INTERNAL DIA. OF EACH ROLL MUST BE WITHIN 300 MM TO 350 MM.

SPECN.IS: 513-1994 (FOURTH REVISION) (AMDT.1) R.A-1998,

MILD STEEL STRIP,SIZE 115 TO 120 MM WIDE X 0.45 MM THICK IN COIL FORM TO SPECN.IS-1079-1994 (5TH REV) AMDT-2,R.A-1998 GRADE D -1079 HOT ROLLED AND ANNEALED (OR) IS: 513- 1994 (FOURTH REV ) (AMDT. 1 ) (R.A -1998) TYPE DRAWING (D)COLD ROLLED AND ANNEALED.

IS-1079-1994

STEEL STRIP COLD ROLLED, SIZE 220 + -0.15 MM WIDE X 0.5 + -0.04 MM THICK (26 BG) COLD ROLLED ANNEALED. WEIGHT OF COIL SHOULD BE BELOW 200 KGS EACH, SPECN.NO.IS-513:1994 (4TH REV) (AMDT.1)R.A-1998,COLD ROLLED & ANNEALED BEST SURFACE TYPE"D"NOTE:INTERNAL DIA.OF EACH ROLL MUSTBE WITHIN 300 MM TO 350MM

IS-513:1994

BOLT M16 X 2P X 50 MM (SOCKET HEAD)

BOLT M16 X 2P X 50 MM (SOCKET HEAD)

MS PLATE OF SIZE 300 X 200 X 6MM (IS 2062-1994 OF ANY GRADE)

IS 2062-1994

MS PLATE OF SIZE 300 X 300 X 25MM (IS 2062-1994 OF ANY GRADE)

IS 2062-1994

MILD STEEL WIRE GALVANISED, SIZE 20 SWG (0.914 MM DIA)TO SPECN IS: 280-1978 (THIRD REV.)(AMDT.NO.2)REAFFIRMED-2001

IS: 280-1978

SEAL TO DRAWING NUMBER 6390 155 DC-35565-A. SPECIFICATION IS-5872-1990

SPECN NO. IS-5872-1990

DRAWING NUMBER 6390 155

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

TOP WASHER TO OFAJ DRG. NO. FS-513F.

DRG. NO. FS-513F.

DRG. NO. FS-513F.

WASHER NOZZLE TO OFAJ DRG NO FS 518B

WASHER NOZZLE TO OFAJ DRG NO FS 518B

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

• PQ ATTACHED

• PQ ATTACHED

ROLL PIN TO OFAJ DRG. NO.FS-516 A

ROLL PIN TO OFAJ DRG. NO.FS-516 A

• ATTACHED

• ATTACHED

'O' RING TO OFAJ DRG. NO.FS-519 D

'O' RING TO OFAJ DRG. NO.FS-519 D

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH (ITEM CODE: 0611525036)

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CORRUGATED SHEET ABC SIZE

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140X12 MM THICK 27 NOS. /SET

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

DRG. NO. F3424215-3(R1)

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

DRG. NO. F3427015-3(R1)

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

. X1831042-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

F-1830942-V1

METALASTIK BUSH PART NO. X0500250-HASE

METALASTIK BUSH PART NO. X0500250-HASE

X0500250

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

F3547515

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

SLOTTED NUT PART NO. F3596815-A

SLOTTED NUT PART NO. F3596815-A

F3596815-A

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

X 3534511 V1

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

X4902110-(7)

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

X3534511 -V1

AXLE TUBE NUT DRG/PART NO. F3550511-A

AXLE TUBE NUT DRG/PART NO. F3550511-A

F3550511-A

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 32 MM DIA SPECN 16 MN CR5

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STEEL ROUND 25 MM DIA SPECN EN-16 TO BS-970 FOR LOCKING BOLT TO PT NO. F3573815 # REAR AXLE ASSY.

STUD 3/8" F3751015 VI

STUD 3/8" F3751015 VI

F3751015 VI

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FX L PT. NO. X3534611 V1 DRG NO. X3534511 V1

SPECIAL SCREW SIZE M14×2×60 IPL NO. 110/FXL PT. NO. X3534611 V1 DRG NO. X3534511 V1

X3534511 V1

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9

X3535411

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION

X1806122-V1

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

ASSY. WHEEL NUT M22×2.5 PT.NO.F3569510

F3569510