FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

DRG. No.F 0741111-3

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

DRG.NO. PS1433111(R1)

FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)

FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)

DRG. NO. X1601211-3(R1)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

DRG. NO. X3303611-3(R1)

FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)

FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)

DRG. NO. X-3303211-3(R1)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

DRG. NO. PS3344611(R2)

FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)

FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)

DRG. NO. X3303311-3(R2)

CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV

CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV

CWC-235

FORG. FOR STEERING LEVER, PART NO.X3206711-3

FORG.FOR STEERING LEVER, PART NO.X3206711-3

X3206711#-3

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

DRG.No. Z-1803011 -(b)

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380

FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR

CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR

CWC-254

CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG

CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG

CWC-233

DRG.NO. 155-1210

DRG.NO. 155-1210

P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.

P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.

PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM

PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM

PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301

PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301

PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ

PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ

PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM

PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM

POWER SUPPLY PCB AS PER SPECN. NO. GMIL.435154.001

POWER SUPPLY PCB AS PER SPECN. NO. GMIL.435154.001

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2388 E FOR 162.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2388 E FOR 162.

COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE Cu CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 12.7 + 0.5 MM WIDE.

COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE Cu CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 12.7 + 0.5 MM WIDE.

SPIRAL TO CQA(A)DRG.NO.BW8.367.009 DC(I) 37271-A DT.08.11.10

SPIRAL TO CQA(A)DRG.NO.BW8.367.009 DC(I) 37271-A DT.08.11.10

STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 23 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)

STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 23 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

MELAMINE MAKE CHINA/INDONESIA. SPECN-(i)ASSAY,PERCENT BY MASS (MIN)-98,(ii) LOSS ON DRYING PERCENT BY MASS (MAX)-0.1 (iii) ASH CONTENT PERCENT BY MASS (MAX)-0.02.(iv) MELTING POINT DEG.-354 (DECOM) (V) BULK DENSITY,G/LIT-600 (VI)PARTICLE SIZE LESS THAN 50 MICRON.

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 18 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)

STEEL STRIP TO SPECIFICATION IS:513-2008 GRADE CR3 OR GRADE 1CS OF BS:1449 SECTION 1.1:1991 TO SIZE 0.1 -0.02MM THICK X 18 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.635.085 FOR CAP)

BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.0 +/- 0.1 MM DIA IN STRAIGHT LENGTH

BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.0 +/- 0.1 MM DIA IN STRAIGHT LENGTH

BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.5 +/- 0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS

BRASS ROUND TO SPECN. BS EN 12166:1998 DESIGN. CUZN35PB2 MATERIAL COND. R540 WITH UTS=54-65 KGF/MM2 & ELON = 5% MIN SIZE: 4.5 +/- 0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METERS

PAINT AZURE BLUE, SPRAYING, TO SPECIFICATION IS:168 (LATESTISSUE) AND ISC 104 OF IS:5 (LATEST ISSUE)

PAINT AZURE BLUE, SPRAYING, TO SPECIFICATION IS:168 (LATESTISSUE) AND ISC 104 OF IS:5 (LATEST ISSUE)

PAINT READY MIXED, SPRAYING, 'BLACK' TO SPECN: IS 168:1993(REAFFIRMED 2002).

PAINT READY MIXED, SPRAYING, 'BLACK' TO SPECN: IS 168:1993(REAFFIRMED 2002).

BLACK PAINT MAT FINISH FOR FINISHING AMMUNITION, AIR DRYING& GENERAL PURPOSE TO SPECIFICATION IS:168(1993) 3RD REVISION, REAFFIRMED 2002 AS APPLICABLE FOR DEFENCE USE.

BLACK PAINT MAT FINISH FOR FINISHING AMMUNITION, AIR DRYING& GENERAL PURPOSE TO SPECIFICATION IS:168(1993) 3RD REVISION, REAFFIRMED 2002 AS APPLICABLE FOR DEFENCE USE.

EXTRUDED FORMED BAR TO OFAJ. DRG. NO. FS-99 G. (Bar has to be free from surface defects like burs, scratch, cut marks & Inclusions. Straightness 0.5 mm max.in 1 meter length).

EXTRUDED FORMED BAR TO OFAJ. DRG. NO. FS-99 G. (Bar has to be free from surface defects like burs, scratch, cut marks & Inclusions. Straightness 0.5 mm max.in 1 meter length).

SHUTTER TO OFAJ DRG. NO. FS-957C. 6333180957

SHUTTER TO OFAJ DRG. NO. FS-957C.

• As per spec

• As per spec.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2388 E FOR 162.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2388 E FOR 162.

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1778.

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1778.

PLASTIC CONTAINER TO OFDC DRG.NO.SK-2658 (LATEST VERSION) FOR FUZE 162 MK-8 & MK-9

PLASTIC CONTAINER TO OFDC DRG.NO.SK-2658 (LATEST VERSION) FOR FUZE 162 MK-8 & MK-9

BRASS ROUND TO SPECN.BS:2872 CZ123 OR BS-2874-1986 GR.CZ-122IN "M" OR "H" CONDITION OR BS:2874- CZ 121 PB3 IN M CONDITIO HAVING STRAIGHT LENGTH OF 1.5- 2 MTRS. SIZE:5.00-0.03 MM DIAHAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

BRASS ROUND TO SPECN.BS:2872 CZ123 OR BS-2874-1986 GR.CZ-122IN "M" OR "H" CONDITION OR BS:2874- CZ 121 PB3 IN M CONDITIO HAVING STRAIGHT LENGTH OF 1.5- 2 MTRS. SIZE:5.00-0.03 MM DIAHAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

BRASS ROUND TO SPECN. BS: 2872 CZ 123 OR BS-2874-1986 GR.CZ-122 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:5.00+/- 0.05 MM DIA

BRASS ROUND TO SPECN. BS: 2872 CZ 123 OR BS-2874-1986 GR.CZ-122 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:5.00+/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 METRES, SIZE: 3.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO0.3 MM/MTR

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 METRES, SIZE: 3.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO0.3 MM/MTR

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121-PB3 IN 'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRESSIZE:-2.642 -0.05 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121-PB3 IN 'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRESSIZE:-2.642 -0.05 MM DIA.

BRASS ROUND TO SPECN.BS: 2873 (LATEST ISSUE) GRADE CZ 108, CONDITION HALF HARD HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRSSIZE: 5.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

BRASS ROUND TO SPECN.BS: 2873 (LATEST ISSUE) GRADE CZ 108, CONDITION HALF HARD HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRSSIZE: 5.00-0.03 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

BRASS WIRE TO SPECN.BS 2873 (LATEST ISSUE) CZ-108 1/2 HARDSIZE: 2MM +/- 0.05 MM, LENGTH 2-3 MTRS.

BRASS WIRE TO SPECN.BS 2873 (LATEST ISSUE) CZ-108 1/2 HARDSIZE: 2MM +/- 0.05 MM, LENGTH 2-3 MTRS.

BRASS WIRE 1.905 MM DIA +0.03 MM TO SPECN. BS 2873 CZ 1081/2 HARD

BRASS WIRE 1.905 MM DIA +0.03 MM TO SPECN. BS 2873 CZ 1081/2 HARD

COLD DRAWN BRASS ROUND WIRE TO SPECN. BS:2872-CZ 123 OR BS; 2874-1986 GR.CZ 122 IN M CONDITION IN COILS.SIZE 5.00+/-0. MM DIA.

COLD DRAWN BRASS ROUND WIRE TO SPECN. BS:2872-CZ 123 OR BS; 2874-1986 GR.CZ 122 IN M CONDITION IN COILS.SIZE 5.00+/-0. MM DIA.

SHUTTER SPRING TO CQA(AMMN) DRG.NO.QX-344, DC-36103-A DATED29.03.1996.

SHUTTER SPRING TO CQA(AMMN) DRG.NO.QX-344, DC-36103-A DATED29.03.1996.

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GRADE 3 OR BS:5216-1991 GRADE HS-3 HAVINGMIN.UTS OF 2470 MPA IN COIL FORM SIZE:0.47 +/-0.008 MM DIA

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GRADE 3 OR BS:5216-1991 GRADE HS-3 HAVINGMIN.UTS OF 2470 MPA IN COIL FORM SIZE:0.47 +/-0.008 MM DIA

STRIKER SPRING TO CQA(A) DRG.NO.IQX-341 DC-36897-ADT.29.04.2003

STRIKER SPRING TO CQA(A) DRG.NO.IQX-341 DC-36897-ADT.29.04.2003

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GR.3 HAVING UTS 2470 MPA (MIN.) IN COIL FORMSIZE 0.43 +/-0.008 MM DIA.

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981(2ND REVISION) GR.3 HAVING UTS 2470 MPA (MIN.) IN COIL FORMSIZE 0.43 +/-0.008 MM DIA.

DETENT SPRING TO CQA(A) DRG.NO.IQX-348 DC-36897-ADT.29.04.2003.

DETENT SPRING TO CQA(A) DRG.NO.IQX-348 DC-36897-ADT.29.04.2003.

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981GR.3 OR BS:5216 1975 GR. HS-3 HAVING MIN. UTS OF 2470 MPAIN COIL FORM SIZE:-0.376 +/-0.009 MM DIA

COLD DRAWN SPRING STEEL WIRE TO SPECN.IS:4454 PT.I 1981GR.3 OR BS:5216 1975 GR. HS-3 HAVING MIN. UTS OF 2470 MPAIN COIL FORM SIZE:-0.376 +/-0.009 MM DIA

BALL BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I)37162-ADTD.11.03.08 MADE UP OF ONLY STEEL TO SPECN.BS-970 PART 1: 1983 GRADE 410 S 21 OR 416 S 21 CONDITION "P"

BALL BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I)37162-ADTD.11.03.08 MADE UP OF ONLY STEEL TO SPECN.BS-970 PART 1: 1983 GRADE 410 S 21 OR 416 S 21 CONDITION "P"

BALL,BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I) 37162-ADTD. 11.03.08.

BALL,BEARING TO CQA(AMMN) DRG.PART NO.QX-1538 DC(I) 37162-ADTD. 11.03.08.

BRASS ROUNDS TO SPECN. BS:2874 -1986 GRADE CZ-121 PB3 IN'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 28.5 +/-0.1 MM DIA.

BRASS ROUNDS TO SPECN. BS:2874 -1986 GRADE CZ-121 PB3 IN'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 28.5 +/-0.1 MM DIA.

MAGAZINE (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWINGNO.FS-2935

MAGAZINE (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWINGNO.FS-2935

WASHER TO CQA(AMMN.) PART NO. (DRG.NO.) IQX-123 DC(I35434-A DT. 30/12/92 (WITHOUT SURFACE TREATMENT).

WASHER TO CQA(AMMN.) PART NO. (DRG.NO.) IQX-123 DC(I35434-A DT. 30/12/92 (WITHOUT SURFACE TREATMENT).

CLIP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-439 DC(I)35434-ADT. 30/12/92(WITHOUT SURFACE TREATMENT).

CLIP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-439 DC(I)35434-ADT. 30/12/92(WITHOUT SURFACE TREATMENT).

SEPTUM TO CQA(AMMN) DRG.PART NO.QX-338,DC-37242-A DT:-23/12/2009.

SEPTUM TO CQA(AMMN) DRG.PART NO.QX-338,DC-37242-A DT:-23/12/2009.

• as per TE

• as per TE

CAP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-438 DC(I) 37326-DT.03/12/12 (WITHOUT SURFACE TREATMENT AND EMBOSSING)

CAP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-438 DC(I) 37326-DT.03/12/12 (WITHOUT SURFACE TREATMENT AND EMBOSSING)

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN 'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 27.00 +/- 0.15 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN 'M'CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 27.00 +/- 0.15 MM DIA.

DISC TO CQA(AMMN) DRG.NO.QX-336, DC-35434-A DT. 30.12.92 (6331801801)

DISC TO CQA(AMMN) DRG.NO. QX-336, DC-35434-A DT. 30.12.92

• AS PER SPECIFICATION

• AS PER SPECIFICATION

BRASS ROUND TO SPECN. BS:2874-1986 GRADE CZ-121 PB3IN 'M' CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRESSIZE:- 38.1 +0.2/ -0.1 MM DIA.

BRASS ROUND TO SPECN. BS:2874-1986 GRADE CZ-121 PB3IN 'M' CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRESSIZE:- 38.1 +0.2/ -0.1 MM DIA.

BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92

BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92

CARBON STEEL ROUND BAR TO SPECN.BS:970 PT.1-1983,GRADE080M40 IN COLD DRAWN OR HEAT TREATED TO "R"COND. WITHHARDNESS 207-255 HB OR GRADE 080M50 IN COLD DRAWN FROMNORMALISED CONDITION WITH HARDNESS 207-255 HB,IN STRAIGTHLENGTH OF 2 - 3 METRES SIZE- 5.5 -0.1 MM DIA.

CARBON STEEL ROUND BAR TO SPECN.BS:970 PT.1-1983,GRADE080M40 IN COLD DRAWN OR HEAT TREATED TO "R"COND. WITHHARDNESS 207-255 HB OR GRADE 080M50 IN COLD DRAWN FROMNORMALISED CONDITION WITH HARDNESS 207-255 HB,IN STRAIGTHLENGTH OF 2 - 3 METRES SIZE- 5.5 -0.1 MM DIA.

COLD DRAWN CARBON STEEL ROUND BARS TO SPECN.BS:970 PT.3-1991 GR. 070M20 IN BRIGHT FINISHED CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE: 12.7 -0.05 MM DIA (10 % MAX. SHORTS DOWN TO 1.5 METRES LENGTH ALLOWED).

COLD DRAWN CARBON STEEL ROUND BARS TO SPECN.BS:970 PT.3-1991 GR. 070M20 IN BRIGHT FINISHED CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE: 12.7 -0.05 MM DIA (10 % MAX. SHORTS DOWN TO 1.5 METRES LENGTH ALLOWED).

ASSY. CROSS MEMBER (WITHOUT AIR FILTER MTG. BKT.) DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1

ASSY. CROSS MEMBER (WITHOUT AIR FILTER MTG. BKT.) DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1

DRG. NO. 215431200116-V1. CONSISTING OF DRG. NO. (I) 215431207117 Bv1 ) 261431207132 b(V1) (III) 3423100006-b V1

MANUFACTURING ASSY & MOUNTING OF 2 KL STAINLESS STEEL WATER BOWSER (TANK) TO BE MOUNTED ON LPTA 715/ TC-32 CHASIS AS PER SPECN NO. CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.

MANUFACTURING ASSY & MOUNTING OF 2 KL STAINLESS STEEL WATER BOWSER (TANK) TO BE MOUNTED ON LPTA 715/ TC-32 CHASIS AS PER SPECN NO. CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.

CQAE/2540/1612/a AND DRG NO. 2230.38.01/V1 & CONNECTED DRGS.

ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)

ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)

VFJ/16/09/00045(V4)

TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018

TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018

LV-6/MT-14/ 2610-000315

• mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached

• visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test as per file attached

TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018

TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018

LV6/MT-14 2610 000301

• mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached

• visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test etc as per file attached

1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119

1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119

LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302)

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

SPRING HANGER BKT. REAR (CAST) DRG. NO. 2614.3240.3701-V1 PT NO. 2614.3240.3701 (SET OF 4 NOS.)

SPRING HANGER BKT. REAR (CAST) DRG. NO. 2614.3240.3701-V1 PT NO. 2614.3240.3701 (SET OF 4 NOS.)

DRG. NO. 2614.3240.3701-V1 PT NO. 2614.3240.3701

FT. SPRING HANGER BKT. FT.& RR. PT.NO. 042.322.0401 J V1 RG. NO. 042.322.0401 J V1 (SET OF 4 NOS.)

FT. SPRING HANGER BKT. FT.& RR. PT.NO. 042.322.0401 J V1 RG. NO. 042.322.0401 J V1 (SET OF 4 NOS.)

PT.NO. 042.322.0401 J V1 RG. NO. 042.322.0401 J V1

REAR TOWING HOOK CONSISTING OF 22 ITEMS & 05 ITEMS AS PER LIST IPL OF FRAME ASSY. TO DRG. NO. REF DRG NO 0125900030 J

REAR TOWING HOOK CONSISTING OF 22 ITEMS & 05 ITEMS AS PER LIST IPL OF FRAME ASSY. TO DRG. NO. REF DRG NO 0125900030 J

DRG NO 0125900030 J

ASSY LONG MEMBER RH BS-III VEHICLE LPTA PT.NO. 215431107112V3 REINFORCEMENT RH PT. NO. 215431207143- V4 BS-III LPTA VEHICLE

ASSY LONG MEMBER RH BS-III VEHICLE LPTA PT.NO. 215431107112V3 REINFORCEMENT RH PT. NO. 215431207143- V4 BS-III LPTA VEHICLE

PT.NO. 215431107112V3 & PT. NO. 215431207143- V4

ASSY LONG MEMBER LH BS-III VEHICLE LPTA PT.NO. 215431107113V4 REINFORCEMENT LH PT. NO. 215431207142-A3-a.V1 BS-III LPTA VEHICLE

ASSY LONG MEMBER LH BS-III VEHICLE LPTA PT.NO. 215431107113V4 REINFORCEMENT LH PT. NO. 215431207142-A3-a.V1 BS-III LPTA VEHICLE

PT.NO. 215431107113V4 & PT. NO. 215431207142-A3-a.V1

ASSY FRONT CROSS MEMBER ENGINE MTG. COMP. PART NO. 215431200126NRLPTA-715, BS-III VEHICLE V1

ASSY FRONT CROSS MEMBER ENGINE MTG. COMP. PART NO. 215431200126NRLPTA-715, BS-III VEHICLE V1

PART NO. 215431200126NRLPTA-715