STL SHT ST V-23 1MM THICK

STL SHT ST V-23 1MM THICK

HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)

HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)

HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"

HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"

REAR GLASS (WITH RUBBER BEADING)

REAR GLASS (WITH RUBBER BEADING) PART NO 640-10-1015/B

640-10-1015/B

SIDE GLASS (WITH RUBBER BEADING)

SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1014/B

640-10-1014/B

CO DRIVER SIDE GLASS (WITH RUBBER BEADING)

CO DRIVER SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1013/B

640-10-1013/B

DRIVER SIDE GLASS (WITH RUBBER BEADING)

DRIVER SIDE GLASS WITH RUBBER BEADING PART NO 640-10-1012/B

640-10-1012/B

WIND SHIELD GLASS (WITH RUBBER BEADING)

WIND SHIELD GLASS PART NO. 640-10-1011/B

640-10-1011/B

REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)

REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)

645-10-1015(I)

SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)

SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)

645-10-1014-(I)

CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)

CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)

645-10-1013-(I)

DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)

DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)

645-10-1012-(I)

WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)

WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)

645-10-1011-(I)

JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).

JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).

"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)

"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F

COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F and SPECIFICATION NO. OFPM/R&D/SP/COMPOSITE - ARMOUR/07 DT. 16.03.2007 Amendment No.: 04 Dt. 02.03.2019

645-15-1-1 TO 15/F

• AS PER SPECIFICATION

• AS PER SPECIFICATION & QAP

PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)

LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*

LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*

RFI DRG. NO. PAG-0012*

INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.

INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.

AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S.

DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210

THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872

THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872

ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294

PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110

PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM

Spring Washer B 5 I.S. 3063

Spring Washer B 5 I.S. 3063

I.S. 3063

Snap Head Rivet 6X30 to IS: 2155

Snap Head Rivet 6X30 to IS: 2155

IS: 2155

SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

DRG. NO. S-1818 FOR ASSY. ERA CONTAINER

SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH DRG. NO. S-1822 FOR ERA BOX

SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH

DRG. NO. S-1822 FOR ERA BOX

SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)

FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992

FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992

IS: 2062/1992

CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK

CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK

IS: 513 GR

5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)

5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)

SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A

FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A

645-01-3321-1/A

QUANTITY = 01. DRAWING NO. ADRDE/209(b) QUANTITY = 02. DRAWING NO. ADRDE/1305(a) QUANTITY = 02. DRAWING NO. ADRDE/1365(c)

QUANTITY = 01. DRAWING NO. ADRDE/209(b) QUANTITY = 02. DRAWING NO. ADRDE/1305(a) QUANTITY = 02. DRAWING NO. ADRDE/1365(c)

CHAIN TO DRG NO. 4027314

CHAIN TO DRG NO. 4027314

DRG NO 4027314

FRP DASH BOARD (MHA VERSION) DRG NO: OFPM-640-01-3321-1/A

FRP DASH BOARD (MHA VERSION) DRG NO: OFPM-640-01-3321-1/A

DRG NO: OFPM-640-01-3321-1/A

SPECIAL WASHER2-3/4"ODX21/32"IDX5/16"THICK DRG./PART NO.F-4934715 HA IPL NO. 105/7

SPECIAL WASHER2-3/4"ODX21/32"IDX5/16"THICK DRG./PART NO.F-4934715 HA IPL NO. 105/7

DRG./PART NO.F-4934715 HA IPL NO. 105/7

TEE PIECE M18 X M18 X M22 PART NO. F 1332111-A

TEE PIECE M18 X M18 X M22 PART NO. F 1332111-A

PART NO. F 1332111-A

ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES)

ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES)

EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)

EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)

115-01-0006-1(A)

ADAPTOR PART NO. X 0100230 C

ADAPTOR PART NO. X 0100230 C

PART NO. X 0100230 C

GUARD ASSY (FOR RR LIGHT) DRG.NO. OFPM 610-06-2011-1/D

GUARD ASSY (FOR RR LIGHT) DRG.NO. OFPM 610-06-2011-1/D

DRG.NO.OFPM610-06-2011-1/D

SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400

SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400

DRG./PART NO.L-4110400

PH-1-7

PH-1-7

ADAPTOR NON RET. VALVE PART NO. F0130145 B

ADAPTOR NON RET. VALVE PART NO. F0130145 B

PART NO. F0130145 B

SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A

SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A

DRG.NO.620-04-1130-1/A

INFLATABLE AIR SPLINT FOR LEG ANKLE + 2

AS PER TENDER DOCUMENT

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

• MSME

• WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

White Colour To Specn.No.CS-5301-B

White Colour To Specn.No.CS-5301-B

• MSME

• White Colour To Specn.No.CS-5301-B

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

• MSME

• WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

• MSME

• VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg No. 4085566 & Drg. No. 4085565 & Drg. No. 13 S 002 As per OFBA Requirement

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

HEAD IMMOBILIZER MAKE ME BER s r 1 via LANGHIRANO 270 43100 FONTANINI PARAMA ITALI MODEL ART 625 XEROS ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER

AS PER TENDER MAKE AND MODEL

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

• MSME

• TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

• MSME

• TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

• MSME

• TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

• msme

• THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

• MSME

• THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THERMOCOLE OF AVERAGE DENSITY

THERMOCOLE OF AVERAGE DENSITY 18 TO 25 KG/M CUBE SIZE 1M X 0.5 M X 6 MM THICKNESS. THICKNESS OF SHEET SHOULD BE 6 MM.

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

• MSME

• TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

• MSME

• TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

• MSME

• M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

• MSME

• TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON RED FAST COLOUR

,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).