CORRUGATED FIBRE BOARD PACKINGCARTON TO OFAJ DRG NO. CC-536B

CORRUGATED FIBRE BOARD PACKINGCARTON TO OFAJ DRG NO. CC-536B

ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.

ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.

CUP NOSE TO OFAJ DRG.NO.FS-523(ARDE DRG.NO.1158 DET-6)

CUP NOSE TO OFAJ DRG.NO.FS-523(ARDE DRG.NO.1158 DET-6)

PLUG TRANSIT TO ARDE DRG.NO.1158 DET-7.

PLUG TRANSIT TO ARDE DRG.NO.1158 DET-7.

ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.

ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.

ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.

STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT

PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT

PACKING CARTON TO OFAJ DRG. NO. FS-986 E FOR FIN ASSLY.

PACKING CARTON TO OFAJ DRG. NO. FS-986E FOR FIN ASSLY.

BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.

BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.

CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C.

CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )

CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )

CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO.

CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO.

CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.

CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.

AL ALLOY TUBE TO OFAJ DRAWING NO.SK-1409 FOR STABILIZING TUBE

AL ALLOY TUBE TO OFAJ DRAWING NO.SK-1409 FOR STABILIZING TUBE

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002

EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.

EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.

CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

TOP WASHER TO OFAJ DRG. NO. FS-513F.

DRG. NO. FS-513F.

DRG. NO. FS-513F.

WASHER NOZZLE TO OFAJ DRG NO FS 518B

WASHER NOZZLE TO OFAJ DRG NO FS 518B

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

• PQ ATTACHED

• PQ ATTACHED

ROLL PIN TO OFAJ DRG. NO.FS-516 A

ROLL PIN TO OFAJ DRG. NO.FS-516 A

• ATTACHED

• ATTACHED

'O' RING TO OFAJ DRG. NO.FS-519 D

'O' RING TO OFAJ DRG. NO.FS-519 D

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH (ITEM CODE: 0611525036)

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRSSIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CORRUGATED SHEET ABC SIZE

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140X12 MM THICK 27 NOS. /SET

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

25 MM +0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN "M" CONDITION OR (B) BS 1474 - 1987, GR-6082 IN "F" CONDITION OR (C) IS 733-83, GR-64430 IN "M" CONDITION

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER, MAIN CHARGE TO DRG.NO.304101457

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

LINER MAIN CHARGE TO OFAJ DRAWING NO.FS-3026

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)

DRG. NO. F3424215-3(R1)

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S

DRG. NO. F3427015-3(R1)

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

E-SHIFT CYLINDER BODY PT. NO. X1831042-V1

. X1831042-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

SHIFT CYLINDER BODY PT. NO. F-1830942-V1

F-1830942-V1

METALASTIK BUSH PART NO. X0500250-HASE

METALASTIK BUSH PART NO. X0500250-HASE

X0500250

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

NY. LOCK NUT 7/8" BST PT. NO.-F3547515 HASE

F3547515

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014

SLOTTED NUT PART NO. F3596815-A

SLOTTED NUT PART NO. F3596815-A

F3596815-A

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

SPECIAL SCREW -X 3534511 V1 SIZE M14×2×40 IPL NO. 109/F(XL) ASSY

X 3534511 V1

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7)

X4902110-(7)

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

SPECIAL SCREW PT. NO. X3535311-V1 SIZE M16×2×50 DRG NO. X3534511 -V1

X3534511 -V1