NEEDLE ROLLER 3 X 17.8 BR

NEEDLE ROLLER 3 X 17.8 BR

F4300310-A, Pt.No. F4300410-A

TAPER ROLLER BRG.(580/572)

TAPER ROLLER BRG.(580/572)

Pt.No. F0230110#, ALT Pt.No. F0214310

NEEDLE ROLLER BRG. MF-5030(50X38X30)

NEEDLE ROLLER BRG. MF-5030(50X38X30)

X0202510

TEPER ROLLER BRG. (683/672)

TEPER ROLLER BRG. (683/672)

Pt.No. F0233010-2, ALT Pt.No.F0214410

ROL BRG. INNER(33019)

ROL BRG. INNER(33019)

Pt.No. X0202310

SAFETY DEVICE TO CQA (A) DRG.NO.4-024069 DET-2 DC-35212-A DT.12.11.91

SAFETY DEVICE TO CQA (A) DRG.NO.4-024069 DET-2 DC-35212-A DT.12.11.91

STEEL STRIP TO SPECN.BS1449.PT-I-1983 SECTION 2 GRADE CS-3 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:- 54 - 0.3 MM WIDE X 0.2 - 0.03 MM THICK.

STEEL STRIP TO SPECN.BS1449.PT-I-1983 SECTION 2 GRADE CS-3 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:- 54 - 0.3 MM WIDE X 0.2 - 0.03 MM THICK.

SAFETY CAP TO CQA (A) DRG. N0. 3-016919 DET-26 DC-37284-A DT.6 -7-2011

SAFETY CAP TO CQA (A) DRG. N0. 3-016919 DET-26 DC-37284-A DT.6 -7-2011

CAP TO OFAJ DRG.NO. FS-1160A

CAP TO OFAJ DRG.NO. FS-1160A

NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)

NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)

BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E

BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E

NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM DIA

NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM DIA

CARBON STEEL GROUND ROUND BARS TO SPECN. BS:970 PT.I(1983)GRADE 080M40 IN HOT ROLLED +COLD DRAWN CONDITION OR BS:970PT.I(1983) GRADE 212M36 IN "R"COND.IN STRAIGHT LENGTH OF 1.5TO 2 METERS TO SIZE 30.00 -0.052 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR

CARBON STEEL GROUND ROUND BARS TO SPECN. BS:970 PT.I(1983)GRADE 080M40 IN HOT ROLLED +COLD DRAWN CONDITION OR BS:970PT.I(1983) GRADE 212M36 IN "R"COND.IN STRAIGHT LENGTH OF 1.5TO 2 METERS TO SIZE 30.00 -0.052 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR

HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE

HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1739 B

PLASTIC CONTAINER TO OFAJ DRG.NO.FS-1739 B

NEEDLE ROLLER BRG. NK90/25

NEEDLE ROLLER BRG. NK90/25

F0244910#

PIN FOR PART NO. 36 TO CQA(AMMN) DRG.3-016919 DET.NO.39DC 37284-A DT.06.07.11

PIN FOR PART NO. 36 TO CQA(AMMN) DRG.3-016919 DET.NO.39DC 37284-A DT.06.07.11

MILD STEEL WIRE TO SPECN. BS:1052-1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 2.6 -0.03 MM DIA

MILD STEEL WIRE TO SPECN. BS:1052-1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 2.6 -0.03 MM DIA

COPPER WIRE BS EN:12163-1998 MATERIAL SYMBOL CU-FRTP NUMBERCW 006A CONDITION R250 WITH UTS 240N/MM2 & % E30, GAUGELENGTH 100 MIN IN COIL FORM. SIZE:3.00 -0.04MM DIA

COPPER WIRE BS EN:12163-1998 MATERIAL SYMBOL CU-FRTP NUMBERCW 006A CONDITION R250 WITH UTS 240N/MM2 & % E30, GAUGELENGTH 100 MIN IN COIL FORM. SIZE:3.00 -0.04MM DIA

EXTRUDED BRASS TUBE TO SPECN.BS:EN-12451:1999 SYMBOL CuZn30ANo.CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVINSTRAIGHT LENGTH OF 2 MTRS MIN SIZE:- 25.5 +/- 0.15 MM O/D,X 21.5 +/- O.15 MM I/D.

EXTRUDED BRASS TUBE TO SPECN.BS:EN-12451:1999 SYMBOL CuZn30ANo.CW 707R MATERIAL CONDITION WITH HARDNESS 130 Hv MIN HAVINSTRAIGHT LENGTH OF 2 MTRS MIN SIZE:- 25.5 +/- 0.15 MM O/D,X 21.5 +/- O.15 MM I/D.

STOP PIN TO DRG.NO.3-016919 DET-21(WITHOUT MILLING/DRILLING OPERATION)

STOP PIN TO DRG.NO.3-016919 DET-21(WITHOUT MILLING/DRILLING OPERATION)

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOL CUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5 TO 2 MTRS.SIZE:3.00-0.03 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR.

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOL CUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5 TO 2 MTRS.SIZE:3.00-0.03 MM DIA HAVING STRAIGHTNESSLESS THAN OR EQUAL TO 0.3 MM/MTR.

BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.

BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.

AXLE TO DRG.NO.3-016919 DET-18

AXLE TO DRG.NO.3-016919 DET-18

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS:5216:1991CODE'M'GRADE 4 OR 5 IN COIL FORM, SIZE:2.175 +/-0.01 MM DIA.

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS:5216:1991CODE'M'GRADE 4 OR 5 IN COIL FORM, SIZE:2.175 +/-0.01 MM DIA.

SLEEVE FOR STEMMING TO CQA AMMN DRG.NO 3-016919 DET-20DC-37284-A DT.6.7.11

SLEEVE FOR STEMMING TO CQA AMMN DRG.NO 3-016919 DET-20DC-37284-A DT.6.7.11

DETENT SLEEVE TO CQA(AMMN) DRG.NO.3-016919 DET-29DC-37284-A DT.6.7.11

DETENT SLEEVE TO CQA(AMMN) DRG.NO.3-016919 DET-29DC-37284-A DT.6.7.11

BRASS ROUNDS SPECN.BSEN 12166-1998 MAT.SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS. SIZE: 9 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

BRASS ROUNDS SPECN.BSEN 12166-1998 MAT.SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS. SIZE: 9 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

DETENT SLEEVE SPRING FOR PART NO. 29 TO CQA(A) DRG.NO.3-016919 DET-30 DC-37284-A DT.6.7.2011

DETENT SLEEVE SPRING FOR PART NO. 29 TO CQA(A) DRG.NO.3-016919 DET-30 DC-37284-A DT.6.7.2011

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN. BS:5216:1991CODE 'M'Gr.4 OR 5 IN COIL FORM, SIZE:0.75 +/- 0.01 MM DIA

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN. BS:5216:1991CODE 'M'Gr.4 OR 5 IN COIL FORM, SIZE:0.75 +/- 0.01 MM DIA

DETENT SPRING FOR PT.NO.28 TO CQA(A)DRG.NO. 3-016919 DET-31DC-37284-A DT.6/7/2011.

DETENT SPRING FOR PT.NO.28 TO CQA(A)DRG.NO. 3-016919 DET-31DC-37284-A DT.6/7/2011.

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS 5216:1991CODE 'M'GR.4 OR 5IN COIL FORM, SIZE: 0.50 +/- 0.01MM DIA.

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS 5216:1991CODE 'M'GR.4 OR 5IN COIL FORM, SIZE: 0.50 +/- 0.01MM DIA.

STEEL ROD TO SPECN.BS:970 PT.I/83GR.080M50 IN COLDDRAWN FROMNORMALISED COND.OR BS:970 PT-I-1991 08050 COLDDRAWN FROM NOR-MALISED COND.OR BS:970:PT-I/83 GR.080M40 IN COLDDRAWN OR HEAT TREATED TO'R'COND.TO SIZE:3.5-0.03MM DIA IN 1.5 TO 2 MTLENGTH HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

STEEL ROD TO SPECN.BS:970 PT.I/83GR.080M50 IN COLDDRAWN FROMNORMALISED COND.OR BS:970 PT-I-1991 08050 COLDDRAWN FROM NOR-MALISED COND.OR BS:970:PT-I/83 GR.080M40 IN COLDDRAWN OR HEAT TREATED TO'R'COND.TO SIZE:3.5-0.03MM DIA IN 1.5 TO 2 MTLENGTH HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

STEEL WIRE TO SPECN. BS:970 PT.I/83 GRADE 080M50NORMALISED & COLD DRAWN CONDITION SIZE 3.5 -0.1 MM DIAIN 2 TO 3 METERES LENGTH.

STEEL WIRE TO SPECN. BS:970 PT.I/83 GRADE 080M50NORMALISED & COLD DRAWN CONDITION SIZE 3.5 -0.1 MM DIAIN 2 TO 3 METERES LENGTH.

HOT ROLLED, NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN. BS:970-PT.I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES,SIZE 23.50 -0.052 MM DIA.(10 % MAX.SHORT LENGTH OF 1.5 METRES ALLOWED).

HOT ROLLED, NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN. BS:970-PT.I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES,SIZE 23.50 -0.052 MM DIA.(10 % MAX.SHORT LENGTH OF 1.5 METRES ALLOWED).

COVER TO CQA AMMN DRG NO. 3-016919 DET-15 DC 37284-A DT 06.07.2011.

COVER TO CQA AMMN DRG NO. 3-016919 DET-15 DC 37284-A DT 06.07.2011.

3-016919

• As per DRG

• As per DRG

ROTOR SLEEVE TO CQA(AMMN) DRG. NO. 3-016919 DETAIL-17DC NO. 37284-A DTD.06 JULY 2011

ROTOR SLEEVE TO CQA(AMMN) DRG. NO. 3-016919 DETAIL-17DC NO. 37284-A DTD.06 JULY 2011

DETONATOR SLEEVE TO CQA AMMN.DRG.NO 3-016919 DET-13 DC-37284-A DT.06.07.11

DETONATOR SLEEVE TO CQA AMMN.DRG.NO 3-016919 DET-13 DC-37284-A DT.06.07.11

BRASS ROUND TO SPECN.BS EN 1652:1998 MATERIAL SYMBOL CUZN39PB2,CW612N CONDITION R420 HAVING STRAIGHT LENGTH 1.5 TO 2 MTSIZE:11.00 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

BRASS ROUND TO SPECN.BS EN 1652:1998 MATERIAL SYMBOL CUZN39PB2,CW612N CONDITION R420 HAVING STRAIGHT LENGTH 1.5 TO 2 MTSIZE:11.00 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM/MTR.

STRIKER SPRING TO CQA(A) DRG.NO.3-016919.

STRIKER SPRING TO CQA(A) DRG.NO.3-016919 DET-11 DC-37284-A DT.6.7.2011.

3-016919

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS 5216:1991CODE 'M' GR.4 or 5 IN COIL FORM, SIZE: 0.65 +/- 0.01 MM DIA

COLD DRAWN MUSIC SPRING STEEL WIRE TO SPECN.BS 5216:1991CODE 'M' GR.4 or 5 IN COIL FORM, SIZE: 0.65 +/- 0.01 MM DIA

INERTIA SLEEVE TO CQA(A) DRG.NO.3-016919 DET-3 DC-37317-A DTD.25.09.2012

INERTIA SLEEVE TO CQA(A) DRG.NO.3-016919 DET-3 DC-37317-A DTD.25.09.2012

RAMMERTO ART NO 1156267 EXCLUDING HYDRAULIC CYLINDER RAMMER UNIT

AS PER TENDER DOCUMENT

BRASS ROUNDS TO SPECN.BS EN 12164 MATERIAL SYMBOL CUZN35PB2COND.R440 HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE: 17.00+/-0.10 MM DIA.

BRASS ROUNDS TO SPECN.BS EN 12164 MATERIAL SYMBOL CUZN35PB2COND.R440 HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE: 17.00+/-0.10 MM DIA.

STRIKER SLEEVE TO CQA (AMMN) DRG. NO.3-016919 DET-12,DC-37284-A DT. 06.07.11

STRIKER SLEEVE TO CQA(AMMN) DRG.NO.3-016919 DET-12,DC-37284-A DT.06.07.11

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.

STOPPER STUD TO CQA (A) DRG.NO.3-016919 DET-33, DC-37284-ADT.06.07.11

STOPPER STUD TO CQA (A) DRG.NO.3-016919 DET-33, DC-37284-ADT.06.07.11

MILD STEEL WIRE TO SPECN. BS:1052(1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 3.45 + 0.01/ - 0.05 MM DIA.

MILD STEEL WIRE TO SPECN. BS:1052(1980 ISSUE)MILD DRAWN BRIGHT WITH UTS OF 40 KG PER MM SQ.(392 MPA)MIN.IN COIL FORM,SIZE:- 3.45 + 0.01/ - 0.05 MM DIA.

STRIKER HEAD TO CQA AMMN DRG.NO.3-016919 DET-9DC-37284-A DT.06.07.11

STRIKER HEAD TO CQA AMMN DRG.NO.3-016919 DET-9DC-37284-A DT.06.07.11

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3METRES, SIZE: 14.5 +/- 0.1 MM DIA WITHOUT PGG.

COPPER WIRE TO BS EN:12166-1968 MATERIAL SYMBOL CU-DHP NUMBER CW 024A CONDITION R200 WITH UTS 240N/MM2 (MIN) IN COIL FORM SIZE: 0.7 -0.03 MM DIA.

COPPER WIRE TO BS EN:12166-1968 MATERIAL SYMBOL CU-DHP NUMBER CW 024A CONDITION R200 WITH UTS 240N/MM2 (MIN) IN COIL FORM SIZE: 0.7 -0.03 MM DIA.

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

ALUMINIUM ALLOY ROUND TO SPECN BS:1474-1987 GRADE 2014A, CONDITION TB, HAVING STRAIGHT LENGTH OF3 TO 4 MTRS SIZE: 4.5 +0.025/ -0.075 MM DIA WITHOUTPERIPHERAL GRAIN GROWTH.

SLEEVE FOR PART NO.36 TO CQA (A) DRG. NO.3-016919 DETAIL-37DC.37284 06.07.2011

SLEEVE FOR PART NO.36 TO CQA (A) DRG. NO.3-016919 DETAIL-37DC.37284 06.07.2011

BRASS ROUNDS SPECN.BSEN:12166-1998 MATERIAL SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS SIZE: 9.5 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

BRASS ROUNDS SPECN.BSEN:12166-1998 MATERIAL SYMBOL CUZN40PB2NUMBER CW 617N CONDITION R410 HAVING STRAIGHT LENGTH OF 1.5-2 MTRS SIZE: 9.5 -0.036 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

SETTING SCREW TO CQA(AMMN) DRG. N0.3-016919 DETAIL NO.36

SETTING SCREW TO CQA(AMMN) DRG. N0.3-016919 DETAIL NO.36

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BSEN:12166-1998 MATERIAL SYMBOLCuZn40Pb2 NUMBER CW 617N CONDITION R 410 HAVING STRIGHT LENGTH OF 2 TO 3 METRES. SIZE:8.5 +/- 0.05 MM DIA

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

SCREW TO CQA(A)DRG.NO.3-016919 DET-32 DC-37284-A DT.6.7.11

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOLCUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5-3 MTRS WITH MIN.UTS OF 441 TO 637 MPA SIZE:4.00-0.03MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

BRASS ROUND TO SPECN.BS EN: 12166-1998 MATERIAL SYMBOLCUZN40PB2 NO CW 617N CONDITION R430 HAVING STRAIGHT LENGTHOF 1.5-3 MTRS WITH MIN.UTS OF 441 TO 637 MPA SIZE:4.00-0.03MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

STEEL STRIP TO SPECN. BS:1449 PT.I -1983 SECTION 2 GRADE CS-3 OR CS-4 IN BRIGHT FINISHED CONDITION IN ROLL FORM, SIZE:-29.00+/-0.25 MM WIDE X 0.12 - 0.02 MM THICK(38 BG)

STRIKER COVER TO CQA(A) DRG.NO.3-016919 DET-8 DC-37284-A DT.06.07.2011.

STRIKER COVER TO CQA(A) DRG.NO.3-016919 DET-8 DC-37284-A DT.06.07.2011.

HARDENED & TEMPERED CARBON STEEL STRIP TO SPECN IS 2507-1975(REAFFIRMED 2005) GRADE 4,DESIGN 70 C 6 OR DESIGN.80 C 6WITH UTS 150 TO 180KGF/MM2 & 180 DEG.BEND TEST CRITERIA OVERA RADIUS OF 2MM.SIZE.0.32 + 0.02/-0.01 THICK,3.00 + 0.05/-0.15 MM WIDE

HARDENED & TEMPERED CARBON STEEL STRIP TO SPECN IS 2507-1975(REAFFIRMED 2005) GRADE 4,DESIGN 70 C 6 OR DESIGN.80 C 6WITH UTS 150 TO 180KGF/MM2 & 180 DEG.BEND TEST CRITERIA OVERA RADIUS OF 2MM.SIZE.0.32 + 0.02/-0.01 THICK,3.00 + 0.05/-0.15 MM WIDE

ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3.00 - 0.15 MM)

ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM)

• As per attachment

• As per attachment

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011 (6333490103)

BALL FOR ROTOR MECHANISM TO CQA (AMMN) DRG. NO. IQX-896 DC 37284-A DT. 06.07.2011

IQX-896 DC 37284-A DT. 06.07.2011

• As per Drg & spec.

• As per Drg & spec.

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011 (6333490104)

BALL FOR STRIKER MECHANISM TO CQA (AMMN) DRG.NO. IQX-895DC 37294-A DT. 16-12-2011

IQX-895DC 37294-A DT. 16-12-2011

• As per Spec & Drawing

• As per Spec & Drawing

STRIKER PIN TO CQA (AMMN) DRG. NO. 3-016919 DET-10 DC-37284-A DT.06.7.2011.

STRIKER PIN TO CQA (AMMN) DRG. NO. 3-016919 DET-10 DC-37284-A DT.06.7.2011.

CARBON STEEL GROUND BAR GRADE 080M50 TO SPECN. BS:970 PT-1-1983 IN COLD DRAWN FROM NORMALISED CONDITION OR GRADE 080M40IN COLD DRAWN OR HEAT TREATED TO "R" CONDITION IN STRAIGHTLENGTH OF 1.5 TO 2 MTR.SIZE:5.5 -0.03 MM DIA.HAVING STRAIGHT-NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

CARBON STEEL GROUND BAR GRADE 080M50 TO SPECN. BS:970 PT-1-1983 IN COLD DRAWN FROM NORMALISED CONDITION OR GRADE 080M40IN COLD DRAWN OR HEAT TREATED TO "R" CONDITION IN STRAIGHTLENGTH OF 1.5 TO 2 MTR.SIZE:5.5 -0.03 MM DIA.HAVING STRAIGHT-NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002 ITEM CODE 6333490102

SEALING RING TO CQA (AMMN)DRG.NO.3-016919 DET-35 DC(I)36861-A DT.30.10.2002

3-016919 DET -35

• AS PER DRG

• AS PER DRG

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

SEALING RING TO CQA(AMMN) DRG.NO.3-016919 DET.4 DC(I)36861-A DT.30.10.2002

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

MAGAZINE COVER TO CQA (A) DRG. NO.3-016919 DET-24DC-37284-A DT.6.7.2011

WASHER FOR PART NO.25 TO CQA (AMMN.) DRG.NO. 3-016919 DETAIL50 DC(1) 37284-A Dt.6.7.2011

WASHER FOR PART NO.25 TO CQA (AMMN.) DRG.NO. 3-016919 DETAIL50 DC(1) 37284-A Dt.6.7.2011

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

LOCKING NUT TO CQA(A)DRG.N O. 3-016919 DET-55DC-37284-A DT.06.7.2011

• As per DRG

• As per DRG

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

LEATHER WASHER TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL-51DC(I) 36154-A DT. 17.8.96. WITHOUT APC TREATMENT (2102884305)

LEATHER WASHER TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL-51DC(I) 36154-A DT. 17.8.96. WITHOUT APC TREATMENT

• As per Spec & Drawing

• As per Spec & Drawing

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO.3-016919 DETAIL22 DC(I) 37284-A DT.6.7.11 (WITHOUT SURFACE TREATMENT)

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

WASHER FOR PART NO.36 TO CQA(AMMN.) DRG. NO. 3-016919 DETAIL38 DC(I) 37284-A DT.06.07.2011.

STEEL SHEET 2 X1250X2500

STEEL SHEET 2 X1250X2500

STEEL SHEET 1.5 X1250X2500

STEEL SHEET 1.5 X1250X2500