"ROTOR SPIRAL"TO OFAJ DRG.NO. FS-2471 A (FOR FUZE M842 FOR AMMN .20MM AMR HEI.)

"ROTOR SPIRAL"TO OFAJ DRG.NO. FS-2471 A (FOR FUZE M842 FOR AMMN .20MM AMR HEI.)

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

" SPIRAL " (BRASS) TO OFAJ DRG. NO. FS-2480B FOR FUZE M859 AMMN.20MM AMR SAPHEI

" SPIRAL " (BRASS) TO OFAJ DRG. NO. FS-2480B FOR FUZE M859 AMMN.20MM AMR SAPHEI

"SPIRAL" TO OFAJ DRG.NO. FS-2469B FOR FUZE M842 FOR AMMN. 20MM AMR HEI.

"SPIRAL" TO OFAJ DRG.NO. FS-2469B FOR FUZE M842 FOR AMMN. 20MM AMR HEI.

STEEL ROUND TO SPECN. BS-970 PT.III:1991 GRADE 080M40 HARDENED & TEMPERED COLD DRAWN SIZE 6.00 +1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III:1991 GRADE 080M40 HARDENED & TEMPERED COLD DRAWN SIZE 6.00 +1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1.8-0.014 MM DIA.

STEEL ROUND TO SPECN. BS-970 PT.III 1991 GRADE 430S17 FERRITIC STEEL COLD DRAWN SIZE 1.8-0.014 MM DIA.

EXTRUDED,COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS:1474- 1987 DESIGN.2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:- 14.5 + 0.5/ - 0.1 MM DIA.

EXTRUDED,COLD DRAWN ALUMINIUM ALLOY ROUND TO SPECN BS:1474- 1987 DESIGN.2014A COND TB IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE:- 14.5 + 0.5/ - 0.1 MM DIA.

STRIKER GUIDE TO OFAJ DRG.NO.FS-2470 C FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STRIKER GUIDE TO OFAJ DRG.NO.FS-2470 C FOR FUZE M842 FOR AMMN.20MM AMR HEI.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

STEEL ROUND TO SPECN: BS-970 PART-3 :1991 GRADE 430S17 COLD DRAWN SIZE 8.00+1.00 MM DIA.

STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS.

STEEL ROUND TO SPECN. BS-970, PT.I 1983 GRADE 220M07 COLD DRAWN FROM HOT ROLLED CONDITION SIZE 18.5 +1.00 MM DIA. IN STRAIGHT LENGTH OF 2 TO 3.5 MTRS.

ARALDITE CY-230 IN 30 KG. PACK.

ARALDITE CY-230 IN 30 KG. PACK.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.

ARALDITE HARDNER HY-951, IN 30 KG. PACK.

ARALDITE HARDNER HY-951, IN 30 KG. PACK.

CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A

CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A

CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)

CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)

SET OF FINS FULLY FINISHED TO DRG.NO.ITV-51 DC 35508-A DT.20-5-93 (FOR 81MM TAIL UNIT 1A)

SET OF FINS FULLY FINISHED TO DRG.NO.ITV-51 DC 35508-A DT.20-5-93 (FOR 81MM TAIL UNIT 1A)

CONVERSION OF DIE CAST FIN TO DRAWING NO.DC-11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO.FS-2934.

CONVERSION OF DIE CAST FIN TO DRAWING NO.DC-11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO.FS-2934.

FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3

FORGING FOR 1st GEAR ON MAIN SHAFT, STLN- BS-III, PT. NO. F1668011-3

DRG. NO. F1668011-3

FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3

FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3

DRG. NO. F8A02611-3

FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3

FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3

DRG. NO. F1402311-3

FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3

FORGING FOR REVERSE GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1668311-3

DRG. NO. F1668311-3

FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

DRG. NO. F3318711-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

DRG. NO. F 1668511-3

FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3

FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3

DRG. NO. F 1668711-3

FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3

FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3

DRG. NO. F1668611-3

FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3

FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3

DRG. NO. F1607211-3

FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B

FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B

DRG. No. X 3402115 -3B

FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A

FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A

DRG. NO. Z 1201311 -A

FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)

FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)

DRG. No. Z1803211- (R2)

FORGING FOR PIN, DRG. No. PS-0932111

FORGING FOR PIN, DRG. No. PS-0932111

DRG. No. PS-0932111

FORGING FOR SELECTOR PLATE, F-2437614-3(A)

FORGING FOR SELECTOR PLATE, F-2437614-3(A)

DRG. NO. F-2437614-3(A)

FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)

FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)

SD9056311(R2)

FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)

FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)

DRG. NO. X1602411-3 (R1)

FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)

FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)

DRG. NO. X1602611-3(R2)

PLASTIC CONTAINER TO OFAJ DRG. NO. FS-2423.A

PLASTIC CONTAINER TO OFAJ DRG. NO. FS-2423.A

FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG.NO.FS-2385 G FOR GUV7.

FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG.NO.FS-2385 G FOR GUV7.

HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.

HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.

LEADED BRASS ROUND TO SPECN.BS-2874-1986 DESIGN CZ-129 IN"M" CONDITION WITH STRAIGHT LENGTH OF 1.5 TO 2 MTRS. SIZE : 7.5 0.036 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS-2874-1986 DESIGN CZ-129 IN"M" CONDITION WITH STRAIGHT LENGTH OF 1.5 TO 2 MTRS. SIZE : 7.5 0.036 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS-2874-1986 DESIGN CZ-129 IN"M" CONDITION WITH STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE : 7.5 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS-2874-1986 DESIGN CZ-129 IN"M" CONDITION WITH STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE : 7.5 +/- 0.05 MM DIA

GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.

GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.

LEADED BRASS ROUND TO SPECN.BS:2874-1986 GR. CZ 129 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS SIZE: 14 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS:2874-1986 GR. CZ 129 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS SIZE: 14 -0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS:2874-1986 GR. CZ 129 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 14 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874-1986 GR. CZ 129 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 14 +/- 0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN "M" CONDITION HAVING ST.LENGTH OF 1.5 - 3 METRES SIZE:17.5-0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN "M" CONDITION HAVING ST.LENGTH OF 1.5 - 3 METRES SIZE:17.5-0.043 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN"M" CONDITION HAVING ST. LENGTH OF 2 TO 3 METRES. SIZE:17.5 +/-0.05 MM DIA.

LEADED BRASS ROUND TO SPECN.BS-2874-1986 GR.CZ 129 IN"M" CONDITION HAVING ST. LENGTH OF 2 TO 3 METRES. SIZE:17.5 +/-0.05 MM DIA.

HOT ROLLED+COLD DRAWN CARBON STEEL GROUND ROUND BARS TO SPECN.BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS TO SIZE 31.00-0.052 MM DIA HAVING STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

HOT ROLLED+COLD DRAWN CARBON STEEL GROUND ROUND BARS TO SPECN.BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 1.5 TO 2 MTRS TO SIZE 31.00-0.052 MM DIA HAVING STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3 MM/MTR

HOT ROLLED+COLD DRAWN CARBON STEEL ROUNDS TO SPECN. BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTRS. (15% MAX.SHORTS DOWN FROM 2.0-3.0 MTRS PERMITTED)SIZE:31.00 - 0.062 MM DIA.

HOT ROLLED+COLD DRAWN CARBON STEEL ROUNDS TO SPECN. BS:970 PT-I 1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTRS. (15% MAX.SHORTS DOWN FROM 2.0-3.0 MTRS PERMITTED)SIZE:31.00 - 0.062 MM DIA.

RING TO CQA(AMMN.) DRG NO. 3-027321 DET-25 DC(I) NO. 36050-A DT. 5-12-95

RING TO CQA(AMMN.) DRG NO. 3-027321 DET-25 DC(I) NO. 36050-A DT. 5-12-95

CONICAL SHUTTER TO CQA(AMMN.) DRG.NO.3-027321 DET-2, DC(I) 35802-A DT.13.9.94.

CONICAL SHUTTER TO CQA(AMMN.) DRG.NO.3-027321 DET-2, DC(I) 35802-A DT.13.9.94.

PACKING RING TO CQA(AMMN.) DRG.NO.3-027321 DET-6 DC NO. 36651-A DTD.28.2.2000.

PACKING RING TO CQA(AMMN.) DRG.NO.3-027321 DET-6 DC NO. 36651-A DTD.28.2.2000.

COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A

COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A

OBTURATOR TO OFAJ DRG. NO. FS-2458 A

OBTURATOR TO OFAJ DRG. NO. FS-2458 A

CUP TO OFAJ DRG. NO. FS-2457 A.

CUP TO OFAJ DRG. NO. FS-2457 A.

CASE CARRYING DRG.NO.CWC-245

CASE CARRYING DRG.NO.CWC-245

CWC-245

CASE CARRYING AS PER DRG.NO.: CWC-250 FOR GNVP M1

CASE CARRYING AS PER DRG.NO.: CWC-250 FOR GNVP M1

CWC-250

CASE CARRYING TO DRG. NO. MCT-1925/3 (COMPLETE) CONSISTING OF DRG. NOS. MCT-1349/1, MCT-1350/1, MCT-1369, MCT-1456/1, MCT-1458/1, MCT-1916/2, MCT-1917/2, MCT-2213/1, MCT-2212/1 CQA(I) INSTRUCTION SHEET NO. IS/INF/15(A).

CASE CARRYING TO DRG. NO. MCT-1925/3 (COMPLETE) CONSISTING OF DRG. NOS. MCT-1349/1, MCT-1350/1, MCT-1369, MCT-1456/1, MCT-1458/1, MCT-1916/2, MCT-1917/2, MCT-2213/1, MCT-2212/1 CQA(I) INSTRUCTION SHEET NO. IS/INF/15(A).

MCT-1925/3 (COMPLETE) CONSISTING OF DRG. NOS. MCT-1349/1, MCT-1350/1, MCT-1369, MCT-1456/1, MCT-1458/1, MCT-1916/2, MCT-1917/2, MCT-2213/1, MCT-2212/1 CQA(I) INSTRUCTION SHEET NO. IS/INF/15(A).

FORGING FOR SELECTOR PLATE, F2437514-3 (A)

FORGING FOR SELECTOR PLATE, F2437514-3 (A)

DRG. NO. F2437514-3 (A)

FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911

FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911

DRG. NO. Z-1802911(R1)

FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3

FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3

DRG. No. F 0741011 -3

FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

DRG. No.F 0741111-3

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

DRG.NO. PS1433111(R1)

FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)

FORG. FOR GEAR INPUT HIGH, STLN- BS-III, PART NO. X1601211-3(R1)

DRG. NO. X1601211-3(R1)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

DRG. NO. X3303611-3(R1)

FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)

FORG. FOR LAY SHAFT, STLN.-BS-III, PART NO. X3303211-3(R1)

DRG. NO. X-3303211-3(R1)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

DRG. NO. PS3344611(R2)

FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)

FORGING FOR OUT PUT SHAFT REAR STALLION BS-III VEHICLE, PART NO X3303311-3(R2)

DRG. NO. X3303311-3(R2)

CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV

CASE CARRYING F.R.P AS PER DRG. NO.CWC-235 FOR MODIFIED PNS 84 MM CARL GUSTAV

CWC-235

FORG. FOR STEERING LEVER, PART NO.X3206711-3

FORG.FOR STEERING LEVER, PART NO.X3206711-3

X3206711#-3

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

DRG.No. Z-1803011 -(b)

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380

FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR

CASE CARRYING AS PER DRG.NO.CWC-254 FOR PNV MONOCULAR

CWC-254

CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG

CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG

CWC-233

DRG.NO. 155-1210

DRG.NO. 155-1210

P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.

P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BORAD OF THICKNESS 2 MM AND COPPER FOILTHICKNESS 50 MICROMETER AS PER SPCN. NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301, SIZE 82.37 MM X 43MM.

PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM

PCB-SMOTP DOUBLE SIDED PTH AS PER DRG. NO. OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER , CONFIRMING TO JSS 52301 AND AS PER SPECN. NO. OLF/MSD/PCB/01/MOD SIZE 94.5X71.63 SQMM

PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301

PCB FOR RMU SIZE -127MMX71MM AS PER DRG. NO. OLF/RMU/COUNTERCARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICROM. , CONFIRMING TO SPECIFICATION OLF/MSD/PCB/01/MOD & JSS-52301

PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ

PCB(DOUBLESIDED PTH) DRG: AU7.820.043 & SPCN:OLF/MSD/PCB/01/MODCONDITINS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASEMATERIAL-GLASS EXPOXY BASE, COPPER CLAD GRADE GF.(3) THICKNESSOF BASE -1.5MM & COPPER FOIL THICKNESS 50 MICRO MTR. (4) PCBTINPLATED WITH PROVISION OF GREEN MASKING (5) SIZE-50X47.5MMSQ

PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM

PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO. AF7.102.187ON GLASS EXPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOILTHICKNESS 35 MICROMETER, AND AS PER SPECIFICATION NO. OFL/MSD/PCB/01/MOD, AND CONFORM TO JASS-52301, PCB SIZE-100X47 SQMM

POWER SUPPLY PCB AS PER SPECN. NO. GMIL.435154.001

POWER SUPPLY PCB AS PER SPECN. NO. GMIL.435154.001