MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

• attached

• attached

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)

• as per file attached

• as per file attached

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

• as per file attached

• as per file attached

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

• as per file attached

• as per file attached

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

• as per file attached

• as per file attached

19 Type of springs

19 Type of springs relevant details(Annexures and Drawings) regarding tender is available at www.ofbeproc.gov.in

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILAT

• as per file attached

• as per file attached

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATI

• as per file attached

• as per file attached

IS:190-1991 , IS:5247 pt-I&II

IS:190-1991 , IS:5247 pt-I&II

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C

AS PER DRAWING

CO-437

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

• as per file attached

• as per file attached

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

• as per file attached

• as per file attached

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.

BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIV

• 1.Sheet Metal work facility 2.Drill/ Punching M/c 3.Riveting facility 4.Welding M/c 5.Surface coating facility 6.Painting facility 7. Other relevant inspection & testing facility

• 1.Sheet Metal work facility 2.Drill/ Punching M/c 3.Riveting facility 4.Welding M/c 5.Surface coating facility 6.Painting facility 7. Other relevant inspection & testing facility

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEI

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

DS CAT NO.5315-001554

• As per drawing

• As per drawing

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

DRG.NO.0204-03-02-03-22-001-00DA

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

STEEL FORGING BREACH BLOCK SLIDE

STEEL FORGING BREACK BLOCK SLIDE DRG NO. SKM-281*2 ''NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGING MACRO ETCH AS PER ASTME -381 WITH ACCEPTANCE STANDARD AS C2,R2,S2 & NMIR TEST AS PER IS -4163-82

DRG NO. SKM-281*2

BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4NOTE 1: SPECIAL INSTRUCTION FOR TEST FOR BOX W-131 MK-3/L (WOOD) IS ENCLOSED.NOTE 2: ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW FIRM/SOURCE.

BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4NOTE 1: SPECIAL INSTRUCTION FOR TEST FOR BOX W-131 MK-3/L (WOOD) IS ENCLOSED.NOTE 2: ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW FIRM/SOURCE.

BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4NOTE 1: SPECIAL INSTRUCTION FOR TEST FOR BOX W-131 MK-3/L (WOOD) IS ENCLOSED.NOTE 2: ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BE

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.

• attached

• attached

CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91

CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91

CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91

• WILL BE UPLOADED

• WILL BE UPLOADED

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

• as per file attached

• as per file attached

CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM ISBEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM

CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM ISBEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM

CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM

• (i) RUBBER MIXING MILL & KNEADING MACHINE (II) EXTRUDER M/C (III) PULVARIZING M/C (IV) ROTO MOULDING/ INJECTION MOULDING M/C (V) GRINDER (VI) DRILL M/C

• (VII) OTHER RELEVANT INSPECTION & TESTING FACILITIES

CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP

CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP

CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP

• as per attachment

• as per attachment

AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED/SUPPLIED BY NEW SOURCE/FIRM

AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED/SUPPLIED BY NEW SOURCE/FIRM

AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BEING DEVOLPED

• uploaded soon

• uploaded soon

CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3.

CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3.

CONTAINER TO DRG.NO.AAIW-1147 (8 SHEET) FOR PACKING OF CARTG.PP-3.

• as per file attached

• as per file attached

CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TODRG TRD 1173"a" C)GASKET TO DRG NO.TRD 1172

CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TODRG TRD 1173"a" C)GASKET TO DRG NO.TRD 1172

CONTAINER P-10B TO DRG TRD-1175 CONSISTS OF FOLLOWING ITEMS 1)SLEEVE TO DRG NO.TRD-1177"a" 2)DISC TO DRG NO.TRD-1176 3)LABLE TO DRG NO.TRD-1359"a"4)CONTAINER NO.P-10 EMPTY ASSY.TODRG NO.TRD-1358 CONSIST:A)BODY DRG NO.TRD 1174"a" B)LID TODRG TRD 1173"

• as per file attached

• as per file attached

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEV

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

MANTLE TO DRG.NO.TRD-2-2-2271.

MANTLE TO DRG.NO.TRD-2-2-2271.

MANTLE TO DRG.NO.TRD-2-2-2271.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

• WILL BE UPLOADED

• WILL BE UPLOADED

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

• uploaded

• uploaded

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

• TO BE UPLOADED

• TO BE UPLOADED

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

• attached

• attached

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

• uploaded soon

• uploaded soon

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

• attached

• attached

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

• uploaded soon

• uploaded soon

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE FOR PROOF 67 NOS.NOTE 3:-In case any Fuze lot fails in filled proof or if anyout turn lot of ammunation assembled with passed fuze lotfails in OTL proof due to reasons attributable to fuze,the supplier will be responsible for replacement of fullquantity (supplied duly passed at empty stage) of the fuzelot.CQA(A) Kirkee pune vide their L/No.QA11072/CR/XIIIDT.23/05/2016 has intimated that rectification/repairshould not be permitted for items procured from trade firms.

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE FOR PROOF 67 NOS.NOTE 3:-In case any Fuze lot fails in filled proof or if anyout turn lot of ammunation assembled with passed fuze lotfails in OTL proof due to reasons attributable to fuze,the supplier will be responsible for replacement of fullquantity (supplied duly passed at empty stage) of the fuzelot.CQA(A) Kirkee pune vide their L/No.QA11072/CR/XIIIDT.23/05/2016 has intimated that rectification/repairshould not be permitted for items procured from trade firms.

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVA

• as per file attached

• as per file attached

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

• as per file attached

• as per file attached

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

• attached

• attached

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

• as per file attached

• as per file attached

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

• uploaded soon

• uploaded soon

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

• TO BE UPLOADED

• TO BE UPLOADED

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

• as per file attached

• as per file attached

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

• as per(1) Suitable Lathe machine, (2) Milling Machine (3) Press Machine (4) Welding facility (5) Phosphating facility (6) Stoving facility (7) Tin Plating facility (8) Soldering facility (9) Painting facility (10) Relevant Inspection & Testing facility. attachment

• (1) Suitable Lathe machine, (2) Milling Machine (3) Press Machine (4) Welding facility (5) Phosphating facility (6) Stoving facility (7) Tin Plating facility (8) Soldering facility (9) Painting facility (10) Relevant Inspection & Testing facility.

'O' RING 78X2 (2013436144)

'O' RING 78X2 (2013436144)

'O' RING 78X2 (2013436144)

• (I) Rubber moulding facility (II) Dimension measuring facility

• (III) Relevant inspection & testing facility

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

• attached

• attached

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

• as per file attached

• as per file attached

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

• as per file attached

• as per file attached

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

• as per file attached

• as per file attached

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

• as per file attached

• as per file attached

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

• (I) Rubber moulding facility (II) Dimension measuring facility

• (III) Relevant inspection & testing facility

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

• as per file attached

• as per file attached

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

• as per file attached

• as per file attached

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

• upload

• upload

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

• attached

• attached

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

• attached

• attached

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

• as per file attached

• as per file attached

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

• as per file attached

• as per file attached

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

• uploaded soon

• uploaded soon

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

• (i) Rubber Mixing Mill or Kneading M/C (ii) Extruder m/c (iii) Pulverizing m/c (iv) Roto Moulding Process / plastic injection moulding m/c (v) Grinder (vi) Drill Machine

• (vii) Other relevant Inspection & Testing facility